
Bratislava area
Car wrap – changing your car’s colour with film
A new colour without a paint shop. Film changes the look of your car and protects the original paint. When you tire of it, we remove it professionally.
- More than 100 colours to choose from
- Original paint protected
- Fully reversible
In short
A car wrap covers the bodywork in film to change the colour or finish of the car. We use cast film (stretchy and stable in shape). We work with 3M Wrap Film 2080, Avery Dennison Supreme Wrapping Film and ORACAL 970RA. You can choose gloss, matte, satin or a colour flip effect. For solid colours on vertical surfaces, the makers state a life of 8 to 12 years. The original paint stays protected under the film. When you tire of the colour, we remove it. We use only premium materials from 3M, Avery Dennison and ORAFOL. They keep their colour longer and carry a manufacturer warranty. We are also a 3M Endorsed Installer.
What a car wrap does for you
-
New colour without paint
Matte, satin, gloss or metallic – hundreds of shades to choose from.
-
Protects the original paint
The film shields the paint from light scratches and sun.
-
Reversible
We remove the film professionally and the car is back to its original colour.
-
Better at resale
Original paint without a respray is an advantage when you sell.

How we carry out a full wrap
You can recognise a good wrap by what you cannot see. Edges are tucked behind the panel. There are no ripples in the creases. The film does not lift out of recesses, even years later. That is why we work like this:
- Wash and decontamination – we remove tar, brake dust and old wax. We degrease panels just before the film goes on.
- Paint check – chips, peeling paint or rust would show through the film. They could also pull it off. We tell you in advance.
- Disassembly – where needed, handles, lights, badges and trims come off. The film can then go around the panel edge.
- Application at a constant temperature – we fit in the workshop. Makers specify a minimum fitting temperature of 10 to 16 °C, depending on the film. A quality wrap cannot be done outdoors in winter.
- Post-heating – we heat the film in creases and on edges. That way it “remembers” its new shape and does not pull back.
- Rest and inspection – the car stays in the workshop after application so the adhesive can bond. Then we check every edge and hand it over with care instructions.

Colours and finishes
You can choose from more than 100 colours and finishes. There are gloss, high gloss, satin, matte, metallics and textures. Effect films change colour with the viewing angle.
ORACAL 970RA also comes as 970RA+ ProSlide. It slides more easily for precise positioning.
We show you the swatch books in the workshop. Look at a sample outdoors in sunlight too. A colour on screen looks different on a car. Matte and satin finishes look darker on large panels than on a small sample.
Partial wraps and accents
You don’t have to change the whole car. Popular options are a black roof, mirrors, a bonnet in a contrasting colour, stripes or chrome delete. A partial wrap is quicker and cheaper. When you sell the car, we easily return it to standard.
A wrap is not enough against stone chips. It is about half as thick as protection film. For the front we recommend clear PPF.
What you see when doors open
A standard full wrap covers everything you see with the doors closed. When you open the doors, bonnet or boot, the original colour shows in the shuts.
With a subtle change, hardly anyone notices, for example silver to graphite. With a dramatic one, such as white to black, it shows.
We can wrap the door shuts too, but it means more disassembly and time. We list it as a separate item in the quote. You decide.
Caring for a wrapped car
Wash a wrapped car more gently than paint. Do not wash it for the first few days after application. We tell you the exact time at handover.
- Wash by hand or in a touchless car wash. 3M recommends avoiding brush car washes, especially with high gloss films.
- Do not aim a pressure washer at film edges and seams from close range.
- Never use wax, polish or abrasive products on matte and satin films. They leave shiny patches.
- Remove spilled fuel, bird droppings and tree sap as soon as possible.
- A car parked in the sun all year ages faster than one kept in a garage. This applies most to the roof and bonnet.
What affects the price
The price depends mainly on the size of the car and the complexity of the bodywork. Deep bumpers, spoilers, sharp creases and lots of disassembly mean more hours of work.
The film matters too. Effect and chrome-look films cost more and are harder to apply than gloss and matte ones.
Door shuts, removal of an old wrap and paint preparation may be added. We list each separately in the quote. You see what you are paying for.
Myths and mistakes
- “Film hides bad paint.” No. Film follows the surface. Chips, rust and unevenness will show through.
- “A wrap protects paint like PPF.” Only from minor things such as light scratches and UV. Against stone chips you need thick clear PPF.
- “Cheap film is just the same.” Cheap calendered (rolled) films shrink over time. Edges pull back and the adhesive stays on the paint when removed. For full wraps we only use cast films made for vehicles.
- “A wrap lasts forever.” Horizontal surfaces such as the roof and bonnet age faster than the sides. Makers state a shorter life for them.
When we do not recommend a wrap
- On poor-quality resprayed panels or peeling paint. The film could lift the paint when removed.
- On fresh paint before it has fully cured. The body shop decides when.
- On a car with rust. The film does not remove it, it only hides it for a short time.
- If you want a new colour for 15 years or more. Then a quality respray is the more honest choice.
Colour change and vehicle registration
The colour of a car is recorded in its vehicle documents. If a wrap changes the colour of the whole car, the change must be recorded at the traffic inspectorate. Check the procedure and current fee with them directly. At handover we are happy to give you a document stating the material and colour used.
The colour and lettering must not be confusable with police, fire or ambulance vehicles.
Full wrap materials
| Range | Manufacturer | Finishes | Film thickness | Expected life (vertical surfaces) |
|---|---|---|---|---|
| Wrap Film Series 2080 | 3M | gloss, high gloss, satin, matte, colour flip | 90 µm without adhesive | 8 years (Northern European conditions) |
| Supreme Wrapping Film | Avery Dennison | gloss, satin, matte, ColorFlow, Rugged | 80 µm without adhesive | black and white 12 yrs, colours 10 yrs, metallic and pearl 5 yrs |
| 970RA / 970RA+ ProSlide | ORAFOL | gloss, matte, Shift Effect, Special Effect | 110 µm without adhesive | black and white 12 yrs, colours 10 yrs, metallic 5 yrs, some special shades 3 yrs |
Figures come from the makers’ data sheets for vertical exterior surfaces. Horizontal surfaces (bonnet, roof) last less. These are expected life figures, not a warranty. We state the maker’s warranty terms for your film and colour in the quote.
Caring for a car wrap
Do not wash the car for the first few days after wrapping. The film is still settling at edges and in recesses. We tell you when the first wash is fine at handover.
Do
- Hand wash, ideally with the two-bucket method
- Wipe off spilled fuel and bird droppings at once
- Use products made for matte finishes on matte film
- Park in the shade when you can
Don’t
- A pressure washer close to film edges and seams
- Brush car washes (they wear the surface faster)
- Wax and polish on matte or satin film
- Ice scrapers directly on the film
Tip from practice: The film edges are the most sensitive spot. If one starts to lift, contact us before dirt and water get underneath.
Full film care guideWhy bring your car to us
We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.
Legal car films, with paperwork
On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.
Only premium materials, data shown openly
We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.
We tell you when film isn’t the answer
Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.
Instant estimate, free survey
Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.
How it works
From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.
Enquiry or photo
Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.
Free site visit
For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.
Your quote
We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.
Installation and warranty
Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.
Frequently asked questions
Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.
Send us an e-mailHow much does a full car wrap cost?
The price depends on the size of the car, the complexity of the bodywork and the film. Send us the make, model and the colour you want via the form. We will prepare an exact price for your car.
Will a wrap damage the paint?
Not original paint in good condition. In fact, the film protects it from UV and light scratches. With resprayed panels we tell you about the risk in advance.
How long does a wrap last?
On vertical surfaces 8 to 12 years depending on the colour, say the makers. Metallics and special effects last less. The roof and bonnet age faster. Material and care matter too.
Do I have to register the colour change?
Yes, if the whole car changes colour. The colour is recorded in the vehicle documents. The change must be registered at the traffic inspectorate. Check the procedure and current fee with them directly.
How should I look after a wrapped car?
Wash it by hand or touchless, with no brushes. Keep high pressure away from the edges. No wax or polish on matte films. You will get detailed instructions at handover.
How long will you need the car?
A full wrap takes several days. Besides fitting, we wash the car, take parts off, post-heat the film and let it bond. We state the exact timing in the quote.
Do you wrap door shuts too?
Yes, as a separate item. Without them you will see the original colour when the doors are open. With a dramatic colour change, that bothers some people.
Can the wrap be removed later?
Yes. We remove the film with heat. Original paint underneath stays as it was on the day of application. Makers state good removability within the warranty period or film life. So do not leave it on the car longer than that.
Which film should I choose – 3M, Avery Dennison or ORACAL?
All three are premium cast vehicle films. What usually decides is the shade you like and its expected life. We show you samples of all three ranges in the workshop.
Can I wrap a leased car?
Yes, a wrap is reversible. Check the terms of your lease agreement first, though. Plan for the film to be removed before the car goes back.
Will the film cover scratches and chipped paint?
No. Film follows the surface, so chips and deeper scratches will show. We recommend repairing them before wrapping.
Can I wrap just part of the car?
Yes. A black roof, mirrors, bonnet or stripes are a quick and cheaper change of look. We often combine them with chrome delete.
Related services
-
Car wrap price
What a full wrap price depends on and what to send us for an exact quote.
Learn more -
Matte, carbon and chrome wrap
Gloss, matte, satin, carbon, colour flip and chrome. How they look, last and clean.
Learn more -
Partial wrap: roof, bonnet, mirrors
A black roof, bonnet or mirrors change the car at a fraction of a full wrap price.
Learn more -
Car wrap or respray?
Film and new paint compared: reversibility, time, lifespan and when to choose which.
Learn more -
Colour change and registration
When a wrap must be entered in the vehicle documents and when not. Simply explained.
Learn more -
New PPF paint protection
Invisible protection against stone chips and scratches. Gloss and matte.
Learn more

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.
A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.