3Mfolie.skWindow & car films
Lettering applied to the side of a white van

Bratislava area

Vehicle graphics for company cars and fleets

A company car is an advert that is on the road every day. We brand a single car or an entire fleet. The graphics will look professional. When the car goes back, we remove them with care.

  • From a single car to a whole fleet
  • Printed and cut graphics
  • Removal without damage to the paint

In short

Vehicle graphics are film designs on the bodywork and rear windows. They can be printed or cut from coloured film. We work with Avery Dennison, ORAFOL and 3M materials. We choose the material by how long the graphics should last and what surface they go on. We brand cars, vans and entire fleets. We help with the design. We remove old graphics without damaging the paint.

Materials we install

What vehicle graphics do for you

  • Advertising that drives

    Many people see your company car every day, in town and on the motorway.

  • A uniform fleet

    All your vehicles look the same and professional.

  • Easy to change

    When your logo changes or you sell the car, we remove the graphics.

  • Quality materials

    We use Avery Dennison, 3M and ORAFOL films made for vehicles.

Two white vans in a car park

What we apply graphics to

  • Company cars – logo, contact details, website.
  • Vans and commercial vehicles – partial or full graphics.
  • Fleets – a consistent look across every vehicle.
  • Perforated film for rear side and rear windows. People see graphics outside, you see out from inside.
  • Short-term campaigns and magnetic signs.

Printed or cut graphics

Cut graphics are cut from solid-colour film. They suit logos, lettering, contact details and stripes. They are simple and very durable. The colour runs through the whole film, so it does not fade the way print can. Ideal for single-colour logos and text.

Printed graphics are printed on white film. A protective laminate (a clear cover film) goes on top. Print allows photos, colour gradients and full-coverage designs. The laminate protects it from UV, washing and scratches. Without it, print on a car would soon fade and rub off.

Cast or calendered film

For flat surfaces and shorter campaigns a good calendered (rolled) film is fine. Creases, rivets and corrugated van sides need cast film. So do rounded bumpers. We heat cast film into recesses and it does not pull back.

Cheap vehicle graphics often make one mistake: calendered film on a corrugated van side. After a few weeks in the sun the film pulls out of the recesses. Bridges and bubbles appear and the graphics look neglected. So we choose the material by the shape of the body and how long the graphics should stay on.

How the job works

  • Brief – send the vehicle type, photos and your idea. For vans, add the body length and height.
  • Design – we lay the graphics on an accurate drawing of your model. The logo will not end up in a door gap, on a handle or on the fuel flap.
  • Approval and production – once you approve, we print, laminate and cut the graphics.
  • Vehicle preparation – we wash and degrease the vehicle. If needed, we remove old graphics.
  • Application – in the workshop at a constant temperature. We post-heat corrugations and rivets.
  • Handover – we check the edges and you get washing instructions.

Graphics that sell on the move

Good graphics can be read in a few seconds at a junction. Less is more. A strong logo, one line on what you do and one contact are enough. Website or e-mail. Long lists of services and small text cannot be read from a distance.

Send finished artwork in vector format (PDF, AI, EPS, SVG). Vectors scale up without losing quality. Photos need to be high resolution. We check they are suitable for print before production. If you have no artwork, we help with a design that stays readable on the move.

Fleets and leasing

For companies with several vehicles we prepare a consistent design, an application schedule and a price per vehicle. We work through the vehicles in stages. So you never take the whole fleet off the road. From the same files we can later produce another vehicle or a damaged panel with an identical look.

When cars go back at the end of a lease, we remove the graphics with heat without damaging the paint. We clean off any adhesive residue.

Removing old graphics

Quality graphics come off easily, old cheap ones do not. Film left on a car longer than it was designed for becomes brittle in the sun. It then comes off in tiny pieces. That is why removal sometimes costs more than customers expect.

On older cars a faint “shadow” of the graphics may remain after removal. The paint under the film was protected from the sun for years, while the paint around it faded slightly. Polishing often helps, but it cannot be fully guaranteed. We tell you in advance.

What affects the price

The price depends mainly on the area covered and on printed or cut graphics. The type of film and laminate matters too. Corrugated sides and rivets mean more work. Design work is added if you have no artwork, as is removal of old graphics. For fleets you get a price per vehicle.

Rules, and when we advise against

  • Advertising and perforated films are only allowed on the rear side windows and the rear window. Not on the windscreen or front side windows.
  • The colours and lettering must not be confusable with police, fire or ambulance vehicles.
  • Perforated film on the rear window reduces visibility at night and in rain. If you drive a lot at night, consider graphics on the bodywork only.
  • We do not apply graphics to peeling or poorly resprayed paint. Removal could lift the paint.
  • For a campaign of a few weeks, magnetic signs are cheaper. But they do not stick to aluminium or plastic panels.

Caring for a car wrap

Do not wash the car for the first few days after wrapping. The film is still settling at edges and in recesses. We tell you when the first wash is fine at handover.

Do

  • Hand wash, ideally with the two-bucket method
  • Wipe off spilled fuel and bird droppings at once
  • Use products made for matte finishes on matte film
  • Park in the shade when you can

Don’t

  • A pressure washer close to film edges and seams
  • Brush car washes (they wear the surface faster)
  • Wax and polish on matte or satin film
  • Ice scrapers directly on the film

Tip from practice: The film edges are the most sensitive spot. If one starts to lift, contact us before dirt and water get underneath.

Full film care guide

Why bring your car to us

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • Legal car films, with paperwork

    On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

  • Instant estimate, free survey

    Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
How much do vehicle graphics cost?

It depends on the scope. A logo on the doors is a different job from a full van wrap. Send the vehicle type, photos and your idea via the form. We will prepare a price as soon as possible.

Will graphics damage the paint?

Not original paint with professional removal. Quality Avery Dennison, ORAFOL and 3M films are designed to come off without damage. The risk is with resprayed panels. We point those out to you.

Can you design the graphics?

Yes. We can help with the design or adapt your artwork. It will be readable on the vehicle and will not end up in gaps or on handles. We send you the design for approval before production.

Do you do whole fleets?

Yes. For fleets we prepare a consistent design, a schedule and a price per vehicle. We work through the vehicles in stages, so your operations do not have to stop.

Can the rear window have graphics too?

Yes, with perforated film. You can see out through it from inside. Advertising films are only allowed on the rear side and rear windows. Not on the windscreen or front side windows.

How long do vehicle graphics last?

It depends on the material and laminate. For long-term graphics we use cast films with laminate. For a short campaign a cheaper material is enough. We give the expected life in the quote.

What artwork format do you need?

Ideally vector PDF, AI, EPS or SVG with fonts converted to outlines. Photos should be high resolution. We check they are suitable for print before production.

Can I take a car with graphics through a car wash?

Yes, after the first few days. A touchless car wash is gentler. Do not aim a pressure washer at film edges from close range.

How long will you need the vehicle?

A logo and lettering on a car is a short job. A full van wrap takes longer. We give the exact time in the quote. For fleets we prepare a schedule.

Will a shadow remain on the paint after removal?

On newer cars usually not. On older cars a faint outline may remain if the graphics spent years in the sun. That is because the paint around them has faded. Polishing often helps.

Do I need a permit for vehicle advertising?

Not for normal company graphics on the bodywork. You must follow the rules for windows. The colours and lettering must not resemble police or emergency vehicles. If the graphics change the colour of the whole car, check registration at the traffic inspectorate.

Can you repair a damaged part of the graphics?

Yes. We can reprint a damaged panel from the files and replace it on its own. For example after a door repair. You don’t have to replace the whole design.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search