3Mfolie.skWindow & car films
Two technicians stretching protective film before applying it to a car

New Bratislava area

PPF – paint protection film in Bratislava

Paint suffers from motorway stone chips, parking scratches, insects and bird droppings. Clear PPF takes the damage instead of your paint. Minor scratches heal by themselves. Build your coverage on the 3D model below. Then send the selection to us for a quote.

  • GSWF, Avery Dennison and affordable HOHO
  • Gloss, satin and matte
  • Precise cut patterns for your model

In short

PPF (paint protection film) is a clear protective film for your paint. It is made of a stretchy plastic (polyurethane) about 0.2 mm thick. It protects paint from stone chips, scratches and chemical stains. Minor scratches heal by themselves. We apply three ranges: premium GSWF Defender (gloss, satin and matte), Avery Dennison Supreme Protection Film (gloss, matte and gloss black) and the more affordable HOHO X8 Pro. You can choose partial front, full front, track pack or full car. Build your coverage on the 3D model below. Send the panels or package to the quote form in one click.

Materials we install

What PPF does for you

  • Paint without stone chips

    A thick clear film catches stone chips and scratches that would otherwise damage the paint.

  • Light swirls disappear

    The top layer self-heals with heat. Sun or warm water is enough.

  • Almost invisible

    Gloss PPF keeps the look of the paint. Matte PPF turns a gloss car matte.

  • Higher car value

    Original, unrepaired paint helps when you sell or return a lease car.

Build your PPF coverage on the 3D model

Rotate the car and click the panels you want protected, or start from a package. Send the selection to the quote form in one click.

Drag to rotate, scroll or pinch to zoom. Click a panel to add or remove it.

Front
Sides and roof
Rear

No panels selected yet.

Bonnet and headlight of a dark car with glossy PPF film

Protection packages

A package is just a starting point. On the 3D model above you can add panels or remove some.

  • Partial front – front bumper, headlights, roughly 40 cm of the bonnet and wings, mirrors. The most popular choice against stone chips.
  • Full front – the whole bonnet and front wings. No visible film edge. Plus the A-pillars.
  • Track pack – full front plus roof, sills and the boot loading edge. For frequent motorway driving and sports cars.
  • Full car – every painted panel and the lights. Maximum protection for new and valuable cars or delicate paint.

Protect a new car as soon as possible, while the paint is still flawless. On older cars we clean the paint thoroughly first. If needed, we recommend polishing.

We offer premium GSWF Defender, Avery Dennison Supreme Protection Film and the more affordable HOHO. All are polyurethane, heal light scratches and carry a maker’s warranty.

What PPF is and why it works

PPF works like a thick, elastic skin for your paint. It is made of polyurethane (a stretchy plastic) with a harder top coat that heals itself. A stone would otherwise chip the paint down to the primer. On the film it bounces off or leaves only a mark. The paint underneath stays intact.

For comparison of thickness: according to the maker, GSWF Defender Platinum is 200 microns, or 0.20 mm. The thickest, Defender Max, is 10 mil, about 0.25 mm. HOHO X8 Pro is 7.5 mil, about 0.19 mm. According to its data sheet, Avery Dennison Supreme Protection Film is 165 µm on its own and 200 µm with the adhesive.

A typical colour wrap film is about half that. That is why a wrap only protects paint from minor marks. PPF also stops stone chips.

GSWF, Avery Dennison or HOHO: which PPF to choose

We offer two PPF ranges. Both are made of thermoplastic polyurethane (TPU) with a self-healing top coat. They differ in gloss, thickness, choice of finishes, warranty and price.

  • GSWF Defender – premium, higher price. According to the maker, the flagship Defender Platinum is 200 µm thick and gives up to 45 % more gloss. Its top coat heals with heat and repels water and dirt. Defender Max is 10 mil (about 250 µm), the thickest in the range. Defender Hydro repels water even more. Defender Satin and Matte give a satin or matte look. GSWF also makes colour PPF in more than 50 colours.
  • HOHO – more affordable. HOHO X8 Pro is 7.5 mil, about 190 µm. It has a nano-ceramic top coat that resists stains and discolouration. Light scratches heal with heat. The maker gives a 10-year warranty against yellowing, cracking, blistering and peeling. HOHO also comes in a satin version.
  • Avery Dennison Supreme Protection Film. The thermoplastic polyurethane film is 165 µm, 200 µm with the adhesive. According to the maker, light scratches on gloss SPF-XI and SPF Matte heal at room temperature. The maker states a lifespan of up to 10 years on vertical surfaces in central Europe. The range also includes SPF Gloss Black for the roof, mirrors or bonnet.

We recommend GSWF for new and valuable cars, for full-car coverage and for a matte or satin look. Choose Avery Dennison if you want light scratches to heal without heat, or want a gloss black PPF. HOHO is a good choice if you mainly want to protect the front at a lower price. We state the price difference in the quote.

Car wrapped in matte grey film, headlight detail

Gloss or matte PPF

Gloss PPF (GSWF Defender Platinum, Avery Dennison SPF-XI or HOHO X8 Pro) keeps the gloss of the original paint and even deepens it. On a glossy car you barely see it at normal viewing distance.

Matte PPF (GSWF Defender Matte or Avery Dennison SPF Matte) protects matte paint without making it shiny. It can also turn a glossy car satin. The colour does not change and it is fully reversible. You can switch between gloss and matte on the 3D model too.

A softer satin look comes from GSWF Defender Satin or the more affordable satin HOHO.

Self-healing and durability

Light scratches level out by themselves on PPF. These are marks from washing or keys. On both GSWF and HOHO they heal with heat, for example sun or warm water. For Avery Dennison Supreme Protection Film the maker states healing at room temperature.

A deep cut through the whole film will not heal. But the film takes the hit, not the paint. We can replace the film on that panel alone.

The film resists UV, road tar, insects and bird droppings. It also resists stains from automotive fluids.

How the application works

  • Wash and decontamination – we remove tar, brake dust and other dirt. A normal wash leaves it behind.
  • Paint inspection – whatever is under the film stays visible under it. We recommend repairing chips and polishing dull paint.
  • Cutting – we cut the film precisely for your model. It must fit the edges and go around sensors, washer jets and badges.
  • Wet application – we lay the film on the panel over a mounting solution. We stretch it into place and squeeze the water out. Wherever the panel allows, we wrap the edges inwards.
  • Curing and inspection – the car stays in the workshop until the film starts to hold. We check every edge before handover.
  • Handover – you get instructions for the first days and for long-term care.

Caring for a car with PPF

You wash a car with PPF like any other car, with a few rules. Do not wash it for the first few days after application, so the adhesive can bond. We tell you the exact time at handover.

  • Use gentle car shampoos without abrasives or solvents.
  • Keep the pressure-washer nozzle at a distance and never aim it at film edges.
  • Abrasive polishes, cutting compounds and waxes with dyes do not belong on the film.
  • Never use wax or gloss products on matte PPF. They leave shiny patches.
  • Remove insects and bird droppings promptly, even though the film protects the paint.

Lifespan and manufacturer warranty

Quality PPF lasts many years with proper care. The maker gives its longest warranty on the flagship GSWF Defender Platinum, and 8 to 10 years on other Defender films depending on the range. We register the GSWF warranty online. HOHO gives a 10-year warranty on X8 Pro against yellowing, cracking, blistering and peeling. Avery Dennison states a lifespan of up to 10 years on vertical surfaces for Supreme Protection Film.

We give the exact warranty terms and length for your film and use in the quote.

What affects the price

Coverage matters most. A partial front is a fraction of the work of a full car.

The size and shape of the body matter too. Sharp creases, air intakes and sensors mean more cutting and more edges.

The price also depends on whether you want wrapped edges. That means more disassembly and time. Gloss or matte film and the condition of the paint count as well. If the paint needs polishing first, we list it separately in the quote.

Myths and mistakes

  • “PPF makes a car indestructible.” No. It protects paint from stone chips and scratches. But a larger stone can still dent the metal underneath.
  • “PPF and ceramic coating are the same thing.” No. A ceramic coating makes washing easier and adds gloss. But it barely protects against stone chips. PPF is a physical layer.
  • “The film will turn yellow.” Old and cheap films did. Current polyurethane PPF from GSWF, Avery Dennison and HOHO has a UV-resistant top coat. GSWF and HOHO also give a warranty against yellowing.
  • “The film hides scratches.” Only very fine ones. Chips and deeper scratches remain visible under a clear film.

When we do not recommend PPF

  • On freshly painted panels before the paint has fully cured. The body shop decides when. Otherwise the film may lift paint when removed.
  • On paint that is peeling or heavily chipped. Repair it first.
  • If you want to change the colour. That is what a car wrap is for, as PPF is clear.
  • On an old car where protection would cost more than a paint repair. We will tell you honestly.

Interior protection

Touch screens, glossy piano-black trims and centre consoles scratch fastest. We protect them with clear protective films. We cut them precisely for your model.

Caring for paint protection film

Do not wash the car for the first few days after application. The adhesive has to bond. We tell you when the first wash is fine at handover.

Do

  • Hand wash with a pH-neutral shampoo
  • Remove insects and bird droppings quickly
  • Light swirl marks disappear with heat (sun, warm water)
  • A ceramic coating can go on top of PPF

Don’t

  • A pressure washer close to film edges and seams
  • Polishing compounds and machine polishing on matte PPF
  • Wax on matte PPF (it leaves glossy patches)
  • Brush car washes right after application

Tip from practice: The film edges are the most sensitive spot. Do not rub them when washing and keep the nozzle pointed away from them.

Full film care guide

Why bring your car to us

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • Legal car films, with paperwork

    On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

  • Instant estimate, free survey

    Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
What is the difference between GSWF, Avery Dennison and HOHO?

GSWF Defender is premium and costs more. It has more gloss, more finishes (gloss, satin, matte, colours) and a longer warranty. Avery Dennison Supreme Protection Film is 200 µm with the adhesive and light scratches heal on it at room temperature. It comes in gloss, matte and gloss black. HOHO is a more affordable polyurethane PPF with self-healing and a 10-year warranty. For new and valuable cars we recommend GSWF.

What is PPF and how long does it last?

PPF is a clear polyurethane film that protects paintwork. It is around 0.2 mm thick. With proper care it lasts many years. GSWF and HOHO give a 10-year warranty on their main ranges, and GSWF Defender Platinum even longer. Avery Dennison states up to 10 years on vertical surfaces. We give the warranty for your film in the quote.

How do I find out the PPF price for my car?

Choose a package or single panels on the 3D model on this page. Send the selection to the quote form and add the make, model and year. We will price it for your exact car.

Partial front, full front or full car?

Most people choose partial or full front, as the front takes most stone chips. Full front has no visible film edge on the bonnet. We recommend full car for expensive cars or delicate paint.

What does the track pack include?

The track pack is full front plus the roof, sills and boot loading edge. Full front means bumper, lights, whole bonnet and wings, mirrors and A-pillars.

Gloss or matte PPF?

Gloss keeps and enhances the original look. Matte is for matte paint. It can also turn a glossy car satin without changing its colour.

Can you see PPF on the car?

Well-applied PPF is barely visible at normal viewing distance. We wrap the edges wherever the panel allows. With a partial front, the film edge on the bonnet is visible up close. That is why many people choose full front.

How does scratch self-healing work?

The top layer is elastic, so light washing scratches level out. Heat is enough, for example sun or warm water. Deep cuts through the film will not heal, but the paint underneath stays protected.

Can I take a car with PPF through a car wash?

Yes, but wait for the first few days after application. After that, hand or touchless washing is gentlest. Do not aim a pressure washer at film edges from close range.

Can PPF be applied to an older car?

Yes, if the paint is in good condition. We clean it thoroughly first and may recommend polishing. Chips should be repaired, otherwise they will show through the film.

Will PPF damage the paint when removed?

Not on original paint in good condition. We remove the film with heat and the paint looks as it did on the day of application. The risk is with resprayed or repaired panels. We warn you about those in advance.

Can I have a ceramic coating on top of PPF?

Yes, the combination is common. The coating makes washing easier and the PPF protects against stone chips. On matte PPF use only products made for matte surfaces.

How long will you need the car?

It depends on the coverage. A partial front is a shorter job. A full car takes several days, because the film needs time to cure. We state the exact timing in the quote.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search