3Mfolie.skWindow & car films
Bonnet and headlight of a dark car with glossy PPF film

Bratislava area

PPF packages: partial front, full front, track pack, full car

Not every car needs film everywhere. The front takes most of the stone chips. That is why we offer four protection packages. You can adjust each one panel by panel. Below you will find what each package covers, who it suits and what it roughly costs.

  • 4 packages, adjustable by panel
  • Indicative prices incl. VAT
  • GSWF, Avery Dennison and HOHO films

In short

A PPF package sets which panels of your car get protective film. Partial front covers the bumper, lights, mirrors and the first 40 cm or so of the bonnet and wings. Full front adds the whole bonnet, the whole wings and the A-pillars (the pillars beside the windscreen). Track pack adds the roof, sills and loading edge. Full car covers every painted panel and the lights. For a saloon, partial front starts at roughly €650 incl. VAT. A full car is roughly €3,300 to €4,220 incl. VAT. Larger cars cost more.

Materials we install

What PPF does for you

  • Paint without stone chips

    A thick clear film catches stone chips and scratches that would otherwise damage the paint.

  • Light swirls disappear

    The top layer self-heals with heat. Sun or warm water is enough.

  • Almost invisible

    Gloss PPF keeps the look of the paint. Matte PPF turns a gloss car matte.

  • Higher car value

    Original, unrepaired paint helps when you sell or return a lease car.

Close-up of a car headlight

Partial front

Partial front protects the areas that take the most stone chips. It is the most popular choice.

  • Front bumper
  • Headlights
  • Bonnet – leading edge, about 40 cm
  • Front wings – leading edge
  • Door mirrors

Who it suits: everyday driving in town and on the motorway. It suits you if you want sensible protection at a sensible price.

Keep in mind: the film ends halfway up the bonnet. Up close and in low light you can see its edge. Over time fine dirt can collect along it.

Full front

Full front protects the whole front of the car with no visible film line. On top of partial front we add these panels:

  • The rest of the bonnet
  • The rest of the front wings
  • A-pillars (the pillars on each side of the windscreen)

Who it suits: new cars, dark paint and drivers who do lots of motorway miles. The film edge sits at the panel edge, not across the bonnet.

In our view this is the best balance of price and result. On dark paint the partial-front edge would be more visible.

Sports car on a race track

Track pack

Track pack is the full front plus the panels that suffer at speed. The name comes from race tracks.

  • Everything in the full front package
  • Roof
  • Sills (the lower panels between the wheels)
  • Rear bumper loading edge

Who it suits: sports cars and frequent long trips. It protects the sills from stones thrown up by the wheels. The loading edge gets worn when you load luggage.

Full car

Full car means film on every painted panel and the lights. On top of the track pack we add the doors, B-pillars, rear quarters, boot lid, rear bumper and rear lights.

Who it suits: new and valuable cars and delicate paint. Also anyone who wants to sell or return the car years later with its original paint.

On a full car you see the biggest difference between gloss and matte film. Matte PPF turns a gloss car satin, see matte PPF.

Adjust the package panel by panel

A package is just a starting point. You can add or remove panels.

Open the 3D PPF configurator. Click a package and then individual panels. For example, partial front plus sills. Send your selection to the quote form in one click.

In the last step of the form you see an indicative price straight away. It uses the same panel prices as the table below.

What the package price depends on

The price is the sum of the panels and the size of the car. Each panel has its own indicative price. The front bumper costs more than the mirrors, for example, because it has more shapes and edges.

We then adjust the price for the body type. A small car has a factor of 0.85 and a hatchback 0.92. A saloon is the base at 1.0. An estate is 1.05, a large saloon and an MPV 1.1. An SUV is 1.15 and a van 1.3.

Matte PPF costs about 10 % more than gloss.

  • Sharp creases, grilles and sensors mean more cutting.
  • Wrapped edges (film folded round the panel edge) need more dismantling and time.
  • Paint condition: chips must be repaired before the film goes on. If the paint needs polishing, we recommend having it done first. We can plan the timing around it.

Indicative PPF package prices (gloss film, incl. VAT)

PackageHatchback (×0.92)Saloon / liftback (×1.0)SUV (×1.15)
Partial front€590 – 760€650 – 830€740 – 950
Full front€930 – 1,190€1,010 – 1,290€1,160 – 1,480
Track pack€1,400 – 1,790€1,520 – 1,950€1,750 – 2,240
Full car€3,040 – 3,880€3,300 – 4,220€3,800 – 4,850

Prices are indicative and include VAT (23 %). They are the sums of the panel prices used in our quote-form estimate, multiplied by the body-type factor. The range is −10 % to +15 %. Matte PPF costs about 10 % more. We give the exact price for your car in the quote.

Caring for paint protection film

Do not wash the car for the first few days after application. The adhesive has to bond. We tell you when the first wash is fine at handover.

Do

  • Hand wash with a pH-neutral shampoo
  • Remove insects and bird droppings quickly
  • Light swirl marks disappear with heat (sun, warm water)
  • A ceramic coating can go on top of PPF

Don’t

  • A pressure washer close to film edges and seams
  • Polishing compounds and machine polishing on matte PPF
  • Wax on matte PPF (it leaves glossy patches)
  • Brush car washes right after application

Tip from practice: The film edges are the most sensitive spot. Do not rub them when washing and keep the nozzle pointed away from them.

Full film care guide

Updated: November 2026

Why bring your car to us

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • Legal car films, with paperwork

    On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

  • Instant estimate, free survey

    Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
Which PPF package is best?

For most cars we recommend the full front. It covers the areas with the most stone chips and has no visible edge on the bonnet. Partial front is the cheaper option. A full car makes sense for valuable cars and delicate paint.

How much does partial front cost?

For a saloon, roughly €650 to €830 incl. VAT. For a hatchback it is about €590 to €760, for an SUV €740 to €950. These figures are for gloss film. We give the exact price in the quote.

How much does full car PPF cost?

For a saloon, roughly €3,300 to €4,220 incl. VAT. For an SUV it is about €3,800 to €4,850. Matte film costs about 10 % more. Body shape and paint condition also affect the price.

What is the difference between partial and full front?

Partial front covers only the first 40 cm or so of the bonnet and wings. Full front covers the whole panels and adds the A-pillars. With full front there is no film edge across the bonnet.

Can you see the film edge on a partial front?

Up close and in low light, yes. From a normal distance most people do not notice it. It shows more on dark paint. If it bothers you, choose the full front.

What exactly is in the track pack?

The full front, roof, sills and the rear bumper loading edge. The full front is the bumper, lights, bonnet, wings, mirrors and A-pillars.

Can I adjust a package?

Yes. In the 3D configurator on the PPF page you can add or remove any panel. Send your selection straight to the form with the price estimate.

Why does an SUV cost more than a hatchback?

SUV panels are larger and need more film and more work. That is why our estimate uses a factor of 1.15. A hatchback has 0.92 and a saloon 1.0.

Do the prices include VAT?

Yes, the prices on this page include VAT. The form shows the same price including VAT.

Can I extend the package later?

Yes. We can film more panels later. In the meantime, though, stones can hit the paint on them. That is why it is better to protect them straight away.

Which films do you use?

Premium GSWF Defender (gloss Platinum, satin and matte), Avery Dennison Supreme Protection Film (gloss, matte and gloss black) and the more affordable HOHO X8 Pro. We state the manufacturer warranty for your film in the quote.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search