3Mfolie.skWindow & car films
Calculator, bills and euros on a desk

New All of Slovakia

Window film energy-saving calculator

Enter your windows and see what film will do for you. The calculator shows how much solar heat the film stops. It also shows the electricity your air conditioning saves and the winter effect on heating.

  • Data from 3M datasheets
  • Summer and winter, honestly
  • Yearly saving in euros

In short

The calculator estimates how much solar heat the film stops from May to September. It works out each side of the building separately. It uses the film’s g-value from 3M datasheets. It converts the saved heat into air-conditioning electricity and into euros at your price. In winter it honestly subtracts the sun the film blocks. The result is an estimate. We make an exact calculation after a site visit.

Materials we install

Calculate your savings

Enter the glass area on each side of the building, the glass type and the film. The result updates instantly.

1. How many m² of glass on each side?

Measure the glass only, not the frame. A 120 × 150 cm window has about 1.4 m² of glass.

2. Building and glass
3. Cooling and heating
–less solar heat through the glass
–heat stopped per summer
–air-conditioning saving per year
–winter effect (heating)
–total per year

An estimate. Film values are manufacturer data (EN 410). Solar radiation is an average for south-west Slovakia. Shading, blinds and how rooms are used change the result.

Get an exact quote
Hand setting the temperature on a room thermostat

What the calculator counts

The calculator counts the solar heat that passes through the glass in summer. It covers the cooling season from May to September. Offices and shops cool for longer, from April to October. They also have more internal heat from people and equipment. The calculator allows for this. It works out each side of the building separately.

For each film it uses the g-value (the share of solar energy that gets into the room). We take the values from 3M datasheets. The maker measures them to EN 410 (the European standard for measuring glass).

The g-value also gives the TSER (how much solar energy the film stops). The relation is simple: TSER = 1 − g.

  • 1. Heat without and with film. The calculator works out the solar heat through your glass in both cases.
  • 2. The difference. This is the heat your air conditioning no longer has to remove.
  • 3. Into electricity. It divides the difference by the EER. That is the air conditioner’s efficiency (how much heat it removes per 1 kWh of electricity). It assumes an EER of about 3.
  • 4. Into euros. It multiplies the saved kWh by your electricity price.

An EER of about 3 means 1 kWh of electricity removes about 3 kWh of heat. So for every 3 kWh of heat the film stops, the air conditioning saves about 1 kWh of electricity.

Hand adjusting a radiator thermostat valve

Winter: we count the loss too

Solar film also stops some useful winter sun. So your heating use goes up slightly in winter. The calculator honestly subtracts this loss from the summer savings.

Solar film does not change heat loss through the window (the U-value). So in winter the calculator only counts the sunshine the film blocks.

What the calculator does not count

  • Shade from trees, buildings and balconies. A shaded window saves less.
  • Blinds, shutters and curtains. If you close them in summer, they already stop some heat.
  • Exact local weather. Every summer and every place is different.
  • Internal gains. That is heat from people, computers and appliances.
  • How you use the room. When you cool, to what temperature and how you ventilate.

So the result is an estimate that can be higher or lower in reality. An exact calculation needs a site visit. The site visit is free.

The calculator does not include the fitting price. You see the price for your windows in the quote form.

Looking up at the blue glass facade of a tall building

How to read the result and choose a film

Compare the result across films and sides of the building. Look for where the film stops the most heat.

  • On double glazing, exterior film works better. It stops heat before it reaches the glass. 3M Prestige 70 Exterior has a g-value of 0.39 on double glazing. The interior version has 0.58.
  • West and south-west windows save the most. South comes next. East saves less and north almost nothing.
  • Without air conditioning, you save no euros on cooling. But the room stays cooler. You get fewer overheated hours.
  • The winter loss depends on the window direction and your heating. If it exceeds the summer saving, don’t fit solar film on that window just to save energy.

We explain the difference on interior vs. exterior film. Film data is on 3M Prestige. The full range is on solar window film.

Tips to get more from your film

  • Start with the worst windows. Do west and south-west first, then south. You don’t have to film the whole house at once.
  • Combine film with external shading. External blinds and awnings work only when lowered. Film works all the time, even when you are away.
  • On double glazing, consider exterior film. It stops more heat and heats the glass less.
  • Keep the glass clean. Built-up dirt reduces how well the film works.

A step-by-step way to estimate the saving without the calculator is on energy savings with 3M Prestige. Want an exact calculation? Send us the glass area, window directions and air-conditioning details via the form.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Updated: November 2026

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
Is the result exact?

No, it is an honest estimate. The calculator doesn’t know about shade, blinds or how you use the room. We make an exact calculation after a free site visit.

Why does my result show a loss in winter?

Solar film also stops some winter sun. So your heating use goes up slightly in winter. The calculator honestly subtracts this loss. If it exceeds the summer saving, solar film isn’t worth it on that window just for energy.

Is film worth it without air conditioning?

You save nothing on cooling electricity, because you don’t use any. But the room stays cooler, with fewer overheated hours. Film also reduces glare and UV.

What electricity price should I enter?

Enter what you really pay for 1 kWh. The most accurate way is to divide the total of your annual bill by your use in kWh. That way you include fees and distribution.

Why does exterior film work better on double glazing?

It stops heat before the glass, and outside air carries the absorbed heat away. 3M Prestige 70 Exterior has a g-value of 0.39 on double glazing. The interior version has 0.58, so it lets in more heat.

What are the g-value and TSER?

The g-value is the share of solar energy that gets into the room. TSER is how much of it the film stops. TSER = 1 − g. A lower g-value means less heat in the room.

What does an air conditioner’s EER mean?

EER is how much heat the air conditioner removes per 1 kWh of electricity. The calculator assumes about 3. An older or weaker unit has a lower EER, so film saves more with it.

Does the calculator include the installation price?

No. The calculator shows only the energy saving. You see the price for your windows in the quote form.

Which windows should I film first?

West and south-west windows, then south. That is where the sun heats most when the room is already warm. North windows don’t need film for energy savings.

Does the calculator work for offices too?

Yes, the principle is the same for a flat, house or office. Offices also have heat from people and computers, which the calculator doesn’t count. For large buildings we recommend a calculation after a site visit.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search