
Bratislava area
Van and company car graphics
A van has large flat areas and hundreds of people see it every day. It is advertising you pay for only once. We do one vehicle or a whole fleet in the same look.
- Cut lettering, print and full wraps
- A uniform look across the fleet
- Careful removal when the vehicle goes back
In short
Van graphics are company branding in film on the bodywork and rear windows. The simplest is cut lettering: logo, name and contacts cut from coloured film. A printed wrap allows photographs and gradients. A full wrap changes the whole vehicle to the company colour. We choose the material by how long the graphics should last. A simpler film is enough for short campaigns. Cast film belongs on shaped surfaces and for years of use. When the vehicle goes back, we remove the graphics carefully.
What vehicle graphics do for you
-
Advertising that drives
Many people see your company car every day, in town and on the motorway.
-
A uniform fleet
All your vehicles look the same and professional.
-
Easy to change
When your logo changes or you sell the car, we remove the graphics.
-
Quality materials
We use Avery Dennison, 3M and ORAFOL films made for vehicles.

Three levels of graphics
- Cut lettering – logo, name, phone and website cut from coloured film. Clean, legible and the cheapest.
- Partial printed wrap – printed areas on the sides and rear doors, completed with cut text.
- Full wrap – film over the whole vehicle. A white van gets the company colour and graphics with no visible edges.
General information on graphics is on the vehicle advertising graphics page.
What should be on a van
A passer-by has a few seconds to read the graphics. Less text therefore means more result.
- Who you are – logo and company name.
- What you do – three or four words, not a list of services.
- How to find you – one phone number or website, in large type.
- Rear doors – the most valuable area. The driver behind reads it at every junction.
If you have no artwork, we will help. We need your logo as a vector file and the company colours.

A fleet with a uniform look
With several vehicles it matters that they look the same. Same colours, same placement, same logo size.
We prepare the artwork for each model separately, because doors, handles and creases sit differently on each. When a new vehicle arrives, we brand it from the same artwork.
We can do the vehicles one after another so your whole fleet is never off the road at once.
Material by length of use
- Short campaign – a simpler film that removes easily.
- Graphics for years – cast film. It keeps its shape, does not shrink and does not lift at the edges.
- Print – a clear laminate protects printed graphics from sun and washing.
- Glass – perforated film made for vehicle glazing is used on rear windows. Outside you see the graphics, inside you see out.
We work with Avery Dennison, ORAFOL and 3M materials.
Leasing and returning the vehicle
The graphics are reversible. When the vehicle goes back we remove them with heat and clean off the adhesive.
Paint under film is protected from the sun. After years it can therefore be slightly richer than the uncovered paint around it. A full wrap avoids this difference.
Advertising graphics are usually not entered in the vehicle documents. More on the colour change and registration page.
What we need for a quote
- make, model, length and height of the van (for example L2H2)
- number of vehicles
- logo and artwork, or a description of what you want
- how long the graphics should last
- whether the vehicle has old graphics
We send the price, a layout proposal and a date in the quote.
Caring for a car wrap
Do not wash the car for the first few days after wrapping. The film is still settling at edges and in recesses. We tell you when the first wash is fine at handover.
Do
- Hand wash, ideally with the two-bucket method
- Wipe off spilled fuel and bird droppings at once
- Use products made for matte finishes on matte film
- Park in the shade when you can
Don’t
- A pressure washer close to film edges and seams
- Brush car washes (they wear the surface faster)
- Wax and polish on matte or satin film
- Ice scrapers directly on the film
Tip from practice: The film edges are the most sensitive spot. If one starts to lift, contact us before dirt and water get underneath.
Full film care guideUpdated: November 2026
Why bring your car to us
We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.
Legal car films, with paperwork
On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.
Only premium materials, data shown openly
We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.
We tell you when film isn’t the answer
Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.
Instant estimate, free survey
Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.
How it works
From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.
Enquiry or photo
Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.
Free site visit
For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.
Your quote
We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.
Installation and warranty
Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.
Frequently asked questions
Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.
Send us an e-mailHow much do van graphics cost?
It depends on the scope. Cut lettering with a logo and contacts is the cheapest, a full wrap the most expensive. We send the exact price in a quote by model and artwork.
Do you do the design too?
Yes, we help with it. We need your logo in a vector format and the company colours.
How long do the graphics last?
It depends on the material. Cast films last for years; simpler films are meant for shorter campaigns. We state the durability of the specific material in the quote.
Can the rear window be covered too?
Yes, with perforated film approved for vehicle glazing. Outside it carries the graphics, inside you see out through it. The vehicle must have both exterior mirrors.
Can you do several vehicles at once?
Yes. We do a fleet one vehicle after another so you are not left without them. They will all look the same.
Do you remove old graphics too?
Yes. We remove old graphics with heat and clean off the adhesive. The price depends on the age and state of the film.
Do advertising graphics have to be entered in the registration?
According to a police statement, a partial wrap is not treated as a permanent colour change. For a full wrap in another colour, check the procedure with the traffic inspectorate.
Related services
-
Vehicle graphics
Company cars, vans and fleets. Printed and cut graphics.
Learn more -
Car wrap and colour change
Full wraps in gloss, matte, satin and effect finishes. The original paint stays protected.
Learn more -
Shop window graphics
Shop windows, business premises and glass walls. Printed and cut graphics.
Learn more

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.
A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.