3Mfolie.skWindow & car films
Light-coloured sports car in a dark studio with headlights on

Bratislava area

Car films in Bratislava

Our workshop is on Panónska cesta in Bratislava. Here we tint windows and protect paintwork with clear PPF film. We also change car colours and apply graphics to company fleets.

  • Own workshop in Bratislava
  • Premium 3M, Avery, ORAFOL materials
  • Fitting certificate

In short

We apply car films in our Bratislava workshop. We tint rear side and rear windows with approved Avery Dennison and 3M films. On the front side windows we fit clear 3M Safety film. Clear PPF film protects your paint from stone chips. We also do full wraps and colour change (car wrap) and graphics for company cars. Chrome delete (dechrome) blacks out chrome window trims, grilles and badges. Window tinting has a guide price list by vehicle type. For other services we price your exact model. If film is not the right solution for your car, we tell you before we start.

Car services

Each film does something different. Tint protects against heat and UV. PPF protects against stone chips. A wrap changes the colour. Window tinting has a guide price list by vehicle type. For other services, send us the make, model and year. We’ll price your exact car. Not sure what you need? Tell us what you want to achieve and we’ll advise.

Before you visit the workshop

Tinting rules, what affects the price and how a job runs. Short and without the marketing.

Two technicians stretching protective film before applying it to a car

Precision you can see at the edges

You can judge a film by its edges, around door handles and on curved panels. And you judge it years later, not on handover day. In 25 years we have seen why films fail. Usually it is the wrong material on a curved panel or fitting in a cold garage. Or edges cut just above the seal. We also tell you what film cannot do. PPF will not stop a dent from a large stone. A wrap will not hide chipped paint. That is why we work like this:

  • Side windows removed for tintingThe film covers the whole glass. It does not wear or lift when you lower the window.
  • Rear window in a single pieceWe shape the film with heat. No strips pieced together and no interference with the heater.
  • Constant temperature in the workshopVehicle film makers specify a minimum fitting temperature of 10 to 16 °C. So the car stays in the workshop before and after fitting.
  • Cast films on curved panelsFor wraps, dechrome and creases we use cast films. They stretch like rubber, do not shrink and do not pull back out of recesses.
  • Paint check before applicationChips, resprayed panels and peeling paint will show under film. We point them out before we start.
  • Approved films and a fitting certificateFor tinting we only use films with an approval mark. Every job comes with a certificate to keep in the car.
  • Manufacturer data, openlyWe quote thickness, lifespan and warranty from the makers’ data for 3M, Avery Dennison, ORAFOL, GSWF and HOHO. Not from advertising.
What the law says about window tinting

Why power plants and shopping centres trusted us with their glass

For 25 years we have done nothing but film. We are M2 Solutions, s.r.o., VAT registered. Our workshop is at Panónska cesta 34 in Bratislava. Every job comes with a proper invoice. You have one accountable partner from survey to handover.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

  • Legal car films, with paperwork

    On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.

  • Instant estimate, free survey

    Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
Where is your workshop?

At Panónska cesta 34 in Bratislava (Petržalka). We are open Monday to Friday, 8:30–17:00. Please book in advance by e-mail or via the form.

How long will you need the car?

It depends on the service. Tinting takes part of a day. A full wrap or full-car PPF takes several days, because the film needs time to bond. We state the exact time in our quote.

Can I tint the front side windows?

Not with dark film. The driver’s and front passenger’s side windows may only have an approved clear safety film. It does not darken, and we fit 3M Safety. We apply dark tint to the rear side and rear windows. The windscreen may only have a sun strip of up to 100 mm.

What materials do you use?

For tinting we use SunTek HP and 3M Color Stable. For paint protection, premium GSWF Defender, Avery Dennison Supreme Protection Film and the more affordable HOHO. For wraps and dechrome, 3M 2080, Avery Dennison Supreme Wrapping Film and ORACAL 970RA. These are premium materials: they last longer, keep their colour and carry a manufacturer warranty. We have the maker’s data sheet for every material.

What is the difference between PPF, a car wrap and a ceramic coating?

PPF is a thick clear film that protects paint from stone chips. A car wrap is a thinner coloured film. It changes the look and only protects against minor marks. A ceramic coating makes washing easier but barely protects against stone chips. For comparison: PPF is around 0.2 mm thick with adhesive, colour wrap film about 0.11 mm.

Do you do dechrome (chrome delete)?

Yes. We black out chrome window trims, grille surrounds, badges and mirror caps. The film can be gloss, matte or satin. It is fully reversible. More under chrome delete and details.

How much does window tinting cost?

Guide prices by vehicle type (incl. VAT) are on the car window tinting page. We confirm the exact price for your model in the quote.

Can several services be combined in one visit?

Yes, we often do that. For example PPF on the front, dechrome and rear window tinting together. You save time and trips. We price the whole package.

Do you apply car films in winter?

Yes. Our workshop has a constant temperature, so the weather outside does not matter. Film makers specify a minimum fitting temperature of 10 to 16 °C. That is why good work outdoors in winter is not possible. In winter, window film just takes longer to dry fully.

Do you also handle company fleets?

Yes. We apply graphics to and tint entire fleets. When cars go back at the end of a lease, we remove old graphics too. We issue invoices and are VAT registered.

Will I get a document for the police after tinting?

Yes. Every tinting job comes with a fitting certificate. It shows the film type and its approval details. Keep it with the vehicle documents.

Will film damage the paint when it is removed?

Not on original paint in good condition. We remove quality films with heat without damage. Resprayed panels carry a risk, and we tell you before we start. Don’t leave film on the car much longer than its lifespan. Old film turns brittle and is harder to remove.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search