
Bratislava area
Chrome delete (dechrome) and car details
Sometimes a little is enough. Black window trims, a black grille and badges change the character of a car. So does a black roof or mirrors. It is quick, reversible and needs no repainting.
- Reversible, no repainting
- Gloss, matte and satin
- 3M, Avery and ORAFOL films
In short
Chrome delete (dechrome) means covering the chrome on a car with film. We cover shiny chrome and aluminium parts with black or coloured film. Most often we black out window trims, grille surrounds and badges. We use cast films 3M Wrap Film 2080, Avery Dennison Supreme Wrapping Film and ORACAL 970RA. You can choose gloss, matte or satin. The change is reversible and the chrome stays protected under the film.
What chrome delete does for you
-
Modern black look
We turn chrome trims, badges and grilles black or coloured.
-
Cheaper than new parts
No need to buy or paint new trims.
-
Reversible
We remove the film and the chrome is back as before.
-
Done quickly
Smaller jobs are usually finished in one day.
What we can black out
- Chrome window trims – the surrounds of the side windows and the strips below them. The most common job.
- Grille surround and slats, bumper and fog-light trims.
- Badges and lettering – a black emblem on the grille and boot. Raised badges depending on their shape.
- Roof rails and bars, a black roof and pillars.
- Mirror caps in black or a contrasting colour.
- Boot trims, exhaust surrounds and decorative door trims.
Want to change the colour of the whole car? See car wrap. We can protect the whole front with clear PPF at the same time.
Why dechrome
Black trims look sporty and modern. They go well with tinted rear windows and black wheels.
Dechrome is also a practical fix. Polished aluminium window trims on many cars oxidise over time. Harsh car-wash chemicals are often to blame. White stains remain that cannot be polished out. Film covers them, so you do not need new parts.
Film is quicker and cheaper than painting or replacing the trims. And it is reversible. You can remove it when you sell the car.
The materials we use
- 3M Wrap Film Series 2080 – Gloss Black, Matte Black and satin. The gloss shades come with a protective film that guards the surface during fitting.
- Avery Dennison Supreme Wrapping Film – cast film with Easy Apply RS adhesive. It slides while you position it and shapes well around rounded trims.
- ORACAL 970RA (ORAFOL) – cast film with RapidAir technology. It lets air escape from under the film.
All are cast films made for vehicles. They are stretchy and follow shaped trims without shrinking. They do not lift at the edges the way cheap calendered (rolled) films do. For black, the makers state a life of 8 to 12 years on vertical surfaces, depending on the range.
How we do a dechrome
- Cleaning and degreasing – we clean the trims, including the gaps along the seals. Wax and dirt collect there. On a greasy surface the film would not hold at the edges.
- Removal where possible – some trims, grilles and badges can be taken off safely. Elsewhere we tuck the film under the seal or behind the edge of the part.
- Application and shaping – we stretch the film onto the trim and heat-form it into the bends. On sharp corners we prefer two pieces with a precise joint. That way we never overstretch the film.
- Cutting without damage – we never cut with a blade on paint or rubber seals.
- Post-heating the edges – we heat edges and bends so the film does not pull back.
- Inspection and handover – we check every edge and give you washing instructions.
Lifespan, removal and care
- Lifespan: quality cast film lasts for years in everyday use. We give the expected life and the maker’s warranty for your material in the quote. Roof rails in direct sun age faster than side window trims.
- Removal: we remove the film with heat without damaging the chrome or paint. It is easiest within the maker’s warranty period or film life.
- Washing: do not wash the car for the first few days after fitting. After that, wash by hand or touchless. Do not aim a pressure washer at the film edges from close range.
- Matte films: do not use waxes, polishes or abrasive products. They leave shiny patches.
- Gloss black: it looks the best. But like any gloss black, it shows fine washing scratches sooner than matte or satin.
What affects the price
The price depends mainly on the number, length and shape of the parts. A straight trim below the window is quick work. A complex grille with slats or a raised badge takes much longer.
It also matters whether the parts can be removed. Gloss, matte or satin makes a difference too. And whether old film needs removing first.
Send a photo of the car and mark what you want blacked out. We will price it exactly.
Myths and mistakes
- “Film on trims only lasts a year.” Cheap calendered film does. It shrinks and lifts at the edges. Cast vehicle film lasts for years.
- “Painting the trims is better.” Painting chrome or anodised aluminium needs special preparation. It is permanent, and with poor preparation the paint peels. Film is reversible and the chrome stays underneath.
- “I’ll just stick on some film from the internet.” On a straight trim, perhaps. Bends, corners and seals need experience. A blade cut in a seal or in the paint cannot be undone.
When we do not recommend dechrome
- A badge with a radar behind it for adaptive cruise control or driver-assistance systems. Film could affect how it works, so we do not wrap such badges.
- Plastic chrome that is already peeling or blistering. The layer under the film would keep lifting and push the film off.
- Very intricate 3D badges and lettering where film would not look good. A replacement black badge is better.
- A leased car, if the agreement does not allow it. Check the terms first.
Interior protection
Glossy piano-black trims, centre consoles and touch screens scratch fastest. We protect them with clear films cut for your specific model. We also protect the boot loading edge and door sills.
Caring for a car wrap
Do not wash the car for the first few days after wrapping. The film is still settling at edges and in recesses. We tell you when the first wash is fine at handover.
Do
- Hand wash, ideally with the two-bucket method
- Wipe off spilled fuel and bird droppings at once
- Use products made for matte finishes on matte film
- Park in the shade when you can
Don’t
- A pressure washer close to film edges and seams
- Brush car washes (they wear the surface faster)
- Wax and polish on matte or satin film
- Ice scrapers directly on the film
Tip from practice: The film edges are the most sensitive spot. If one starts to lift, contact us before dirt and water get underneath.
Full film care guideWhy bring your car to us
We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.
Legal car films, with paperwork
On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.
Only premium materials, data shown openly
We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.
We tell you when film isn’t the answer
Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.
Instant estimate, free survey
Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.
How it works
From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.
Enquiry or photo
Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.
Free site visit
For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.
Your quote
We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.
Installation and warranty
Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.
Frequently asked questions
Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.
Send us an e-mailWhat is dechrome or chrome delete?
It means covering the chrome on a car with black or coloured film. This covers window trims, the grille, badges and polished aluminium. It is also known as chrome blackout.
Can chrome delete be removed later?
Yes. We remove the film with heat and the chrome and paint stay undamaged. Under the film they were also protected from the weather and car-wash chemicals.
How much does it cost to black out window trims?
The price depends on the model, the length and shape of the trims and the material. Send the make, model, year and a photo via the form. We will price it for your car.
How long does chrome delete take?
It depends on the model and scope. Window trims alone are a short job. A complete dechrome including the grille and badges takes longer. We tell you the exact time when you book.
Gloss, matte or satin black?
Gloss black matches piano-black details and black mirrors. But it shows fine scratches sooner. Matte and satin look sporty and understated and hide small marks better. We show you samples in the workshop.
How long does the film on trims last?
Quality cast film lasts for years. For black, the makers state 8 to 12 years on vertical surfaces, depending on the range. We give the expected life and maker’s warranty for your material in the quote.
How should I look after wrapped trims?
Do not wash the car for the first few days. Then wash by hand or touchless. Keep the pressure washer away from the edges. Do not use wax or polish on matte films.
Will film help with oxidised aluminium trims?
Yes. The film covers the white stains on oxidised trims. It also protects the trim from further damage. You do not need to replace the part.
Can you wrap the grille badge if there is a radar behind it?
No. A radar for adaptive cruise control or driver-assistance systems may sit behind the badge. Film could affect how it works. We recommend a replacement black badge made for your model.
Do you also do black roofs and mirrors?
Yes. A gloss black roof and mirror caps are a popular addition to dechrome. For bigger changes, see car wrap.
Do I need to register a dechrome?
No. Blacking out trims, the grille and badges is not a change of the vehicle’s colour. You only need the traffic inspectorate when you change the colour of the whole car.
Do you protect the interior too?
Yes. We protect piano-black trims, the centre console and touch screens with clear films. We cut them for your model. We also protect the boot loading edge and sills.
Related services
-
Car wrap and colour change
Full wraps in gloss, matte, satin and effect finishes. The original paint stays protected.
Learn more -
Partial wrap: roof, bonnet, mirrors
A black roof, bonnet or mirrors change the car at a fraction of a full wrap price.
Learn more -
New PPF paint protection
Invisible protection against stone chips and scratches. Gloss and matte.
Learn more

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.
A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.