3Mfolie.skWindow & car films
Curved glass facade of a high-rise in the evening

All of Slovakia

Security films for banks and sensitive sites

We supply security films to banks, post offices, jewellers and technical sites. With them come the documents that insurers and security teams ask for. We work discreetly and outside opening hours.

  • Documentation for your insurer
  • Work outside opening hours
  • Experience in critical infrastructure

In short

For banks and sensitive sites we use 3M Scotchshield security films. They range from the Ultra microlayer series to the toughest, S2400. We choose the film to meet your insurer’s or security manager’s requirements. We supply documents for the material used. We have experience on nuclear power plant sites.

Materials we install

What safety film does for you

  • Glass does not scatter

    If the glass breaks, the film holds the shards together and protects people from cuts (tested to EN 12600).

  • Slows down burglars

    Selected thick films have an EN 356 resistance class. Getting through the glass takes longer and makes noise.

  • Almost invisible

    Clear safety films let through 85 % of light or more. Your windows look the same.

  • UV and sun as well

    They stop 99 % of UV. Combined films also reduce heat.

Who this service is for

Security film for banks and post offices protects branches against quick break-ins and people against shards. We most often choose 3M Scotchshield Ultra S800, and S2400 for cash desks. On uPVC and aluminium windows we fit them under the glazing bead. All classes are on the safety window film page.

Every site has a different risk. Before quoting, we review your insurer’s requirements or your security policy. We then propose a specific film, not a generic solution.

  • banks, branches and ATM areas
  • jewellers, goldsmiths and pawnshops
  • post offices and cash desks
  • technical and energy facilities
  • government institutions and public offices – see safety film for public offices

What the film actually does in a branch

The film does not stop glass from cracking. It stops a hole from opening once the glass breaks. The shards stay stuck to the tough film, and the pane holds together.

So an intruder cannot knock out the window with one blow. They have to hack at the film again and again. They make noise and lose time until the alarm or guards respond.

Protecting people matters just as much. After an impact, vandalism or a spontaneous break, sharp shards do not fall on clients or staff.

  • smash-and-grab – jewellers’ windows, cash desks, display cases near the entrance
  • vandalism – the glass cracks but stays in the frame without an opening
  • injury from shards – on impact and on spontaneous breakage
  • glass falling out – on PVC and aluminium windows we fit the film under the glazing bead, so broken glass stays in the frame

EN 356 and EN 12600 classes explained

A class tells you which test a specific film passed on a specific glass. EN 356 is an anti-burglary test. A 4.11 kg steel ball is dropped onto the sample three times. The impact points form a triangle around the centre of the pane. The higher the drop, the higher the class.

  • P1A – ball dropped from 1.5 m
  • P2A – from 3 m (for example 3M Safety S140 on 4 mm glass)
  • P3A – from 6 m (3M Scotchshield S2400 on 4 mm glass, Solar Screen Safety Clear 17 C)
  • P4A and P5A – from 9 m. These classes, and the axe classes P6B to P8B, need laminated security glass, not film.

EN 12600 is a pendulum test. It mimics a person falling against the glass. The top class is 1B1.

With 1B1, the glass cracks under the hardest impact, but no dangerous opening forms. The fragments hold together. A class applies only to the glass used in the test. That is why we state the test glass for every film.

Film under the bead: glass stays put

Film stuck only to the glass holds the shards. But a heavy blow can push the whole cracked pane out in one piece.

So on aluminium and PVC windows we remove the glazing bead (the strip that holds the glass in the frame). We lay the film right to the glass edge, so it continues under the bead. Then we put the bead back.

When the glass breaks, the film-held glass stays clamped in the frame. It does not fall out, so an intruder cannot get in easily. It is a higher level of security than a standard installation. More on the safety film under the glazing bead page.

This only makes sense with a sound frame. An old or loose frame becomes the weakest point. We will tell you so at the survey.

How we survey a branch

The survey is free. On sensitive sites we arrange it with the security manager, often outside opening hours. You get a quote with a specific film for each pane. We check:

  • glass type and thickness – single, toughened, laminated or double glazed (the mark in the glass corner helps)
  • pane size and shading, because of thermal stress (the risk of cracking from uneven heating)
  • frame material and the condition of frames and glazing beads
  • your insurer’s requirements or internal security policy
  • any old film that needs removing
  • access rules, alarms and the times when we can work
Building lobby with entrance turnstiles

Discretion and planning

At branches we work after closing time or at weekends. That way we do not disrupt your clients.

We know strict access rules: induction training, passes, work permits and supervision. At the Jaslovské Bohunice and Mochovce nuclear power plants, this is a routine part of the job.

We do not publish details of the site, the glazing or security measures. We do not name specific branches in our references without consent.

Silhouettes of two workers at a large glazed wall

Installation step by step

We plan around your opening hours, so the branch does not have to close. Every pane gets the same process:

  • Preparation – we cover sills and floors and set up a safe work zone.
  • Cleaning – we wash the glass thoroughly and scrape off dirt. It would show under a thick film.
  • Wet application – we lay the film on wet glass and squeegee out the water. We trim it with a small gap at the frame.
  • Film under the bead – on PVC and aluminium windows we remove the glazing bead, take the film to the glass edge and refit the bead.
  • Inspection and handover – we check every pane. We hand over the material and application documents.

Drying and care

Thick security film takes longer to dry than thin solar film. Films up to 100 µm (0.1 mm) take about a month. Thick security films can take several months.

Until the water under the film evaporates, the glass may look slightly hazy. You may also see small water pockets. This is normal, and they disappear over time.

Do not wash the film for the first 30 days. After that, clean it with a soft cloth or rubber squeegee and a cleaner with pH 6–8. Avoid ammonia and abrasives. Never use a razor blade, and do not stick tape or stickers on the film.

Service life and what drives the price

Interior security films usually last 10 to 15 years or more. We state the maker’s warranty for each film. For example, 3M Safety S140 has 10 years and Scotchshield Ultra S800 has 15 years. Routine checks only need to look at the film and silicone edges. The price depends mainly on:

  • film thickness and type – polyurethane S2400 costs considerably more than thinner microlayer films
  • fitting under the glazing bead – depends on the number and length of beads
  • total area and number of branches
  • weekend work; night work only when there is no other way, and for a surcharge
  • removal of old film and access to high glazing

We send an exact price after the survey. Or based on photos and sizes from the quote form.

Myths about security film

  • “Film is bulletproof.” It is not. Bullet resistance (EN 1063, BR classes) comes only from thick laminated glass. We do not supply bullet-resistant glass. We explain the difference on the bullet-resistant glass page.
  • “With film, the glass won’t break.” It breaks, but it does not fall apart. That is the whole point.
  • “Thicker film is always better.” The 200 µm microlayer Ultra S800 reaches class 1B1, like thicker films. The test result counts, not the thickness.
  • “You can see security film.” Our clear films let through 82 to 89 % of light. Clients usually do not notice them.

When film is not the right answer

We will tell you honestly, even if we lose the job. Film is not enough if:

  • you need protection against gunfire or axes (EN 356 P6B and above) – then you need laminated security glass
  • your insurer wants certified security glazing and will not accept film on glass – check with them in advance
  • the frame is weaker than the glass and the whole window can be levered out
  • the glass is already cracked or has chipped edges

Film works best together with an alarm, CCTV and guards. Its job is to buy time.

Combining with other functions

We can combine security film with sun protection (3M Scotchshield Ultra Prestige). Also with privacy, or a frosted film with your logo that screens the cash desk area. On outside glass that attracts graffiti, we add anti-graffiti film.

Films with documented resistance classes

For branches and sensitive premises we choose films with an EN 356 class. You can pass the test report to your insurer. For each film we state the test glass and what the class means for an attacker.

3M · safety, interior

Safety S140

A thick anti-burglary film. On ordinary 4 mm glass it took three drops of a 4.11 kg ball from 3 m. The ball did not get through. A burglar who smashes the glass with a stone still faces a flexible layer. He has to hack through it, makes noise and loses time. If we fit the film under the glazing bead, the whole pane stays in the frame.

Thickness
350 µm
Light transmission
86%
UV rejection
98%
Solar energy rejected
22%
EN 356
P2A (4 mm float glass)

Best for: ground floors, shop windows, branches, stores and offices with valuables.

EN 356 P2A on 4 mm float glass (TÜV Rheinland, report 89217098-01, 2020). Warranty 10 years.

3M · safety, interior

Scotchshield Ultra S800

Thinner than S140, but it has 56 micro-layers. So it is very hard to tear, and a split does not spread. It combines the top class for protecting people (1B1) with resistance to thrown objects. On PVC and aluminium windows we fit it under the glazing bead. The broken pane then stays in the frame.

Thickness
200 µm (56 micro-layers)
Light transmission
87%
UV rejection
99.9%
EN 12600
1B1 (4 mm glass)
EN 356
P1A (4 and 6 mm glass), P2A (5 mm tempered)

Best for: shop windows, banks, public offices, schools and public buildings.

EN 12600 1B1 and EN 356 P1A (TÜV Rheinland, 2021), EN 356 P2A on 5 mm tempered glass (3M). ANSI Z97.1 Class A. Warranty 15 years.

3M · safety, interior

Scotchshield S2400

The toughest film we offer. It is not polyester but tough polyurethane. It stretches more than five times its length before it tears. On 4 mm glass it reached P3A. A 4.11 kg ball dropped three times from 6 m did not get through. It is still not bulletproof; the maker says so clearly. It is not designed for axe attacks (EN 356 P6B and above).

Thickness
635 µm (polyurethane)
Light transmission
89%
UV rejection
99%
EN 356
P3A (4 mm glass), P2A (6 mm glass)
EN 12600
1B1 (4 and 6 mm glass)

Best for: banks, jewellers, cash desks, critical infrastructure – ideally fitted under the glazing bead.

EN 356 P3A and P2A, EN 12600 1B1 (TÜV Rheinland), UL 972. Reaction to fire B-s1, d0. Warranty per 3M bulletin – stated in our quote.

Avery Dennison · safety, interior

SF Clear 12 mil i

The first thickness that also resists a deliberate attack. P2A means the filmed glass took three drops of a 4.11 kg steel ball from 3 metres. The ball hit three points around the centre of the pane and did not pass through. A burglar with a stone or hammer has to strike again and again. He makes noise and loses time, which is the whole point.

Thickness
300 µm (12 mil)
Light transmission
87%
UV rejection
99%
EN 356
P2A
Break strength
approx. 60 kg/cm

Best for: ground floors, patio doors, shop windows, offices with equipment.

EN 356 P2A (certificate held by the distributor). Warranted durability 12 years.

Solar Screen · safety, interior

Safety Clear 12 C

A thicker version rated P2A. Note one detail: the P2A test report covers two layers of this film on 6 mm glass. We have not seen a report for a single layer. If your insurer requires P2A, we plan two layers. Or a film certified as a single layer.

Thickness
310 µm
Light transmission
82% (3 mm glass), 74% (Low-E double glazing)
UV rejection
95–99%
EN 12600
1B1
EN 356
P2A (2 layers of film)

Best for: shops, ground floors and stores where you want a clear film with paperwork.

EN 12600 1B1 (impact on film side and glass side), EN 356 P2A (2 × 300 µm on 6 mm glass, INISMa Mons, 2013). Fire rating M1. Warranty 10 years.

Solar Screen · safety, interior

Safety Clear 17 C

The thickest clear Solar Screen film we offer. It is built from four 100 µm polyester layers. According to the data sheet it reaches EN 356 class P3A. In that class a 4.11 kg ball is dropped three times from 6 m and must not pass through the glass. The maker also states EN 13541 class ER1 for blast pressure. The data sheet does not name the test glass. So we ask the maker for the test report and state the glass in our quote.

Thickness
485 µm (4 polyester layers)
Light transmission
86% (3 mm glass), 78% (Low-E double glazing)
UV rejection
99%
EN 12600
1B1
EN 356
P3A
EN 13541
ER1

Best for: shop windows, large glazed areas and higher-risk premises.

EN 12600 1B1, EN 356 P3A, EN 13541 ER1 (Solar Screen data sheet). Fire rating M1. Warranty up to 10 years.

Avery Dennison · safety, interior

SF Clear 15 mil i

The thickest clear film in the SF Clear range. It is the strongest and hard to tear or puncture. The distributor lists no EN 356 or EN 12600 class for it. So we do not use it where an insurer wants a certified class. Then we choose 12 mil, 3M S140 or Ultra S800.

Thickness
380 µm (15 mil)
UV rejection
99%
Break strength
over 75 kg/cm
EN 356
not stated
Light transmission
not stated

Best for: glass exposed to vandalism where no certificate is required.

No EN class stated. Warranted durability 12 years (distributor data).

Manufacturer data from 3M, Avery Dennison and Solar Screen (data sheets, test reports and certificates, distributor ideo.sk). 3M values are on 6 mm glass, Avery Dennison on single glazing. Solar Screen values are on 3 mm glass and Low-E double glazing. An EN class applies to the film and glass used in the test.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for safety film

Thick safety film dries longer than thin solar film. Haze and bubbles can stay for several months. Do not clean it for the first 30 days.

Do

  • Water with a mild, ammonia-free cleaner
  • Soft cloth and rubber squeegee
  • Check the film edges and glazing beads once a year
  • Report damaged sealant or beads to us straight away

Don’t

  • Drilling or screws through the film
  • Removing sealant or beads at the edges
  • Razor blades, scrapers and rough sponges
  • Stickers and suction cups on the film

Tip from practice: If we laid the film under the glazing bead, the bead is part of the protection. Contact us before you replace beads or seals.

Full film care guide

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
Are safety films bulletproof?

No. Bullet resistance (EN 1063, classes BR1 to BR7) comes only from thick laminated glass. Film holds the shards and delays entry, but it will not stop a bullet. 3M says so clearly for S2400 film. We do not supply bullet-resistant glass. We explain the difference on the bullet-resistant glass page.

What is the highest class a film achieves?

3M Scotchshield S2400 reached EN 356 P3A on 4 mm glass. A 4.11 kg ball dropped three times from 6 m did not get through. Higher classes P4A and P5A (drops from 9 m) and the axe classes P6B to P8B need laminated glass.

Which film do you recommend for a bank branch?

We choose security film for banks by the risk and your insurer’s requirements. For standard branches with shopfronts: 3M Scotchshield Ultra S800. It has EN 12600 1B1 and EN 356 P1A to P2A, depending on the glass. For cash desks and jewellers: 3M Scotchshield S2400. On PVC and aluminium windows we fit both under the glazing bead; all classes are on the safety films page.

Can you provide documents for an insurer?

Yes. We supply the film data sheet and proof of application. We add the test report or class certificate from the maker or distributor. Check in advance that your insurer accepts film on glass. We will prepare the documents for that conversation.

Why do you fit the film under the glazing bead?

So a broken pane does not fall out in one piece. We remove the bead, lay the film to the glass edge and refit the bead. The film-held glass then stays clamped in the frame. We do this on aluminium and PVC windows; the frame must be sound.

Can you work outside opening hours?

Yes. At branches and shops we often work in the evening or at weekends. We work at night only when there is no other way, and for a surcharge. In the morning we hand back a clean workplace. The drying film does not get in the way of business.

Have you worked on high-security sites?

Yes. We worked at the Jaslovské Bohunice and Mochovce nuclear power plants for Slovenské elektrárne. The strictest access and safety rules apply there. Training, passes, permits and supervised work are routine for us.

Will clients be able to see the film?

Hardly at all. Clear security films let through 82 to 89 % of light. For the first few weeks the glass may look slightly hazy until the film dries. To screen a cash desk area, for example, we use a frosted or decorative film.

How long does security film last?

Usually 10 to 15 years or more. Warranties vary. 3M Safety S140 has 10 years and Scotchshield Ultra S800 15 years. Avery Dennison SF Clear has 12 years. At the end of its life we replace the film without replacing the glass.

When can we clean the glass after fitting?

After 30 days at the earliest. Thick films take longer to dry, sometimes several months, and the glass may look hazy until then. After that, use a soft cloth and a cleaner with pH 6–8, without ammonia or abrasives.

Do you also work on branches outside Bratislava?

Yes, we work across Slovakia. For a branch network we prepare one schedule and the same film for every site. So all your branches have the same documentation.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search