3Mfolie.skWindow & car films
Office building with ribbon windows on every floor

All of Slovakia

Films for windows and buildings

Film changes how glass behaves without replacing it. It stops heat in summer or keeps it in during winter. It blocks prying eyes. Or it stops broken glass from scattering. In 25 years we have fitted it on flats, homes, offices, conservatories and large shopping centres in Slovakia.

  • Free site visit and measuring
  • Premium 3M, Avery Dennison, ORAFOL, Solar Screen films
  • Including work at height from platforms

In short

Window films are thin polyester layers applied to existing glass. Depending on the type, they stop solar heat (solar control or heat reduction films). Others improve winter insulation, block UV, give privacy or add security. We fit them on flats, homes, offices, shopping centres, conservatories and public buildings across Slovakia. We choose the film by glass type and window orientation. The site visit is free. We will also tell you when film is not the right answer.

Choose by what you want to solve

Choose by problem or building type. Not sure? Send us a photo of the window. We will recommend one specific film, not a catalogue.

Expert guides and 3M Prestige

Physics, specifications and practical advice. So you choose the right film for your glass.

Looking up at the blue glass facade of a tall building

The right film on the right glass

Not every film belongs on every window. With double, triple and roof glazing we assess thermal stress (the risk of cracking from uneven heating). With Low-E glass (which has an invisible heat-keeping coating) we check the film is compatible. A flat in a panel block needs a different film from an office full of screens. And different again from the glass roof of a conservatory. So we start with a site visit, not a sale. We identify the glass from the marking on the spacer bar. We measure the panes and hold samples against your window. The quote names one specific film with values from the data sheet. Fitting is clean, with no building work and no new windows. We apply the film wet and squeegee out the water. We trim the edges at the frame. Water under the film dries out gradually, usually within 30 days. We use only premium materials from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. On PVC and aluminium windows we fit safety film right under the glazing bead. Broken glass then stays clamped in the frame. It is a higher level of security; read more about film under the glazing bead.

  • Glass type assessmentSingle, double or triple glazing, Low-E glass or polycarbonate.
  • Inside or outsideWe fit film outside where inside film would not be suitable.
  • Recommendation by orientationSouth and west need a different film from north.
  • Manufacturer data on the tableVLT (light), TSER (energy blocked), g-value (heat let in) and UV for your glass. Not a guess.
  • Work during operation and at heightIn sections or at weekends. From platforms in atriums and on façades. All our installers are certified for work at height and for operating aerial work platforms and walkways.
  • Honest adviceIf film won’t solve the problem, we tell you before you pay.
How a project works

Where we have worked

We have worked inside the Jaslovské Bohunice and Mochovce nuclear power plants. That meant security clearance and the strictest health and safety rules. We fitted film in open shopping centres in sections and from platforms. In Comenius University buildings we worked while teaching went on.

  • Aupark
    Shopping centre
  • Eurovea, Bratislava
    Shopping centre
  • Slovenské elektrárne, Jaslovské Bohunice and Mochovce nuclear power plants
    Energy
  • Slovnaft, Bratislava
    Refinery
  • Autopolis, Bratislava
    Car dealer
  • Bratislava
    University
  • Bratislava
    Shopping centre
  • Prievidza
    Shopping centre

Why power plants and shopping centres trusted us with their glass

For 25 years we have done nothing but film. We are M2 Solutions, s.r.o., VAT registered. Our workshop is at Panónska cesta 34 in Bratislava. Every job comes with a proper invoice. You have one accountable partner from survey to handover.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

  • Legal car films, with paperwork

    On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.

  • Instant estimate, free survey

    Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
How much do window films cost?

We price film per m². It depends on the film type, area, glass type and access (ground level or platform). On small jobs, travel and set-up weigh more in the price per m². The online form shows an estimate straight away. We send an exact price after a photo or a free site visit. More under Pricing. Prices per m² and examples are in how much window film costs.

What is the difference between solar control, heat reduction and thermal film?

None. They are common names for films that stop part of the heat, glare and UV at the glass. More on the solar control film page.

Can film be applied to double or triple glazing?

Yes, but not every film. In the sun the centre of the pane heats up while the edges in the frame stay cool. Thermal stress builds up and the glass can crack. The risk grows with large panes, triple glazing, dark films and blinds right behind the glass. So we choose by glass, orientation and pane size, often fitting film outside.

Do you apply film from the inside or the outside?

Mostly inside. There the film is protected from the weather and lasts longer. If the glass or access doesn’t allow it, we use exterior film. It stops the heat before it reaches the glass.

Will the room be dark?

Not necessarily. Non-metallic films such as 3M Prestige 70 let through around 70 % of light on single glass. These are the maker’s figures. They still stop much of the heat and don’t block mobile or Wi-Fi signal. We show you samples on your window.

How do the site visit and measuring work?

We go through the windows and note orientation, sizes and glazing type. We also look at what is behind the glass: blinds, curtains, radiators. We identify the glass without taking anything apart, from the spacer-bar marking and a reflection test. We hold up samples and propose a specific film for each group of windows.

How does fitting work and how long does it take?

We cover sills and the floor and clean the glass with a scraper. We apply the film wet, squeegee out the water and trim the edges. We always work as a team of two and fit about 30 m² of film a day. At height or on small panes it is less. A flat or house is usually done in a day. On large buildings we work in sections so operations can continue.

Why is there haze under the film after fitting, and how do I clean it?

Haze and small bubbles are water from the fitting. With standard films it dries in about 30 days, longer with thick safety films and in winter. Don’t clean the film for the first 30 days. After that use only a soft cloth and a cleaner with a pH of 6–8 (mild), without ammonia or abrasives.

How long does film last, and can it be removed?

Interior films typically last 10 to 15 years or more, exterior 3M Prestige 10 to 15 years. We state the manufacturer’s warranty in the quote. We can remove film at any time without damaging the glass and fit a new one.

When is film not the right answer?

When the problem isn’t the glass. For example draughty frames, a misted double-glazed unit, cracked glass or heat through the roof. Film does not stop heat loss in winter. Mirror film doesn’t give privacy at night. Then we will advise you differently.

Do you also work on flats, offices and shopping centres?

Yes. Each building type has different problems. So each has its own page: flats, family homes, offices, shopping centres, conservatories and public buildings. Send photos of your windows to m2s@m2s.sk or via the form.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search