3Mfolie.skWindow & car films
Technician shaping blue film on a bonnet with a heat gun

Bratislava area

Partial car wrap: roof, bonnet, mirrors

You do not have to wrap the whole car. A black roof or mirrors change its character at a fraction of the price of a full wrap. And they can be reversed at any time.

  • Roof, bonnet, mirrors, spoiler
  • Reversible, paint stays protected
  • Faster and cheaper than a full wrap

In short

A partial wrap means covering one or several panels of a car with film. Most often we do a gloss black roof, the bonnet, mirror caps, the spoiler and pillars. We use the same cast films as for a full wrap: 3M Wrap Film 2080, Avery Dennison Supreme Wrapping Film and ORACAL 970RA. The wrap is reversible and the paint beneath stays protected. A partial wrap is usually not entered in the vehicle documents, because the car’s predominant colour stays the same.

Materials we install

What a car wrap does for you

  • New colour without paint

    Matte, satin, gloss or metallic – hundreds of shades to choose from.

  • Protects the original paint

    The film shields the paint from light scratches and sun.

  • Reversible

    We remove the film professionally and the car is back to its original colour.

  • Better at resale

    Original paint without a respray is an advantage when you sell.

Black car with black details instead of chrome

What gets wrapped most often

  • Roof – a gloss black roof visually lowers the car and imitates panoramic glass.
  • Bonnet – matte black or carbon for a sporty look.
  • Mirror caps – black or in a contrasting colour.
  • Spoiler, diffuser and trims – small parts that finish the whole.
  • Pillars and window frames – gloss black unifies the side line.
  • Stripes and graphics – lengthwise stripes or sides in another colour.

Chrome trims and badges are covered by chrome delete.

White SUV with a black roof seen from above

A black roof: what to bear in mind

The roof gets more sun than any other panel. Film lasts less there than on the doors. Manufacturers state a shorter life for horizontal surfaces.

Gloss black looks like glass but shows every speck of dust and fine mark. Matte or satin is less demanding up close.

We remove roof rails, the aerial and carriers as needed. The film then runs beneath them and no edge shows.

Matching the paint

Film has its own shade and gloss. Black film next to black paint may not look exactly the same.

So we wrap whole panels, not parts of them. The film edge then ends in the gap between panels, where the difference cannot be seen.

We hold a sample against your car in daylight. You choose by what you see, not by a picture.

Advantages over a full wrap

  • less time in the workshop
  • a lower price, as less material and labour go in
  • the car’s predominant colour does not change
  • easy return to the original state

More on vehicle documents on the colour change and registration page.

What it costs

The price depends on the panel, the car model and the film. A roof with a panoramic window or rails takes more work than a plain one.

Send us the car model and a list of panels. You get the exact price in the quote.

Caring for a car wrap

Do not wash the car for the first few days after wrapping. The film is still settling at edges and in recesses. We tell you when the first wash is fine at handover.

Do

  • Hand wash, ideally with the two-bucket method
  • Wipe off spilled fuel and bird droppings at once
  • Use products made for matte finishes on matte film
  • Park in the shade when you can

Don’t

  • A pressure washer close to film edges and seams
  • Brush car washes (they wear the surface faster)
  • Wax and polish on matte or satin film
  • Ice scrapers directly on the film

Tip from practice: The film edges are the most sensitive spot. If one starts to lift, contact us before dirt and water get underneath.

Full film care guide

Updated: November 2026

Why bring your car to us

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • Legal car films, with paperwork

    On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

  • Instant estimate, free survey

    Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
How much does a roof wrap cost?

It depends on the size of the roof, the rails, the aerial and the film. We send the exact price for your model in a quote.

Does film last as long on the roof as on the doors?

No. Roof and bonnet get the most sun. Manufacturers state a shorter life for horizontal surfaces than for vertical ones.

Does a black roof have to be entered in the registration?

According to a police statement, a partial wrap is not treated as a permanent colour change. If in doubt, ask the traffic inspectorate.

Can a roof with a panoramic window be wrapped?

Yes, we run the film around the glass. The roof glass itself can be tinted with window film. More on the panoramic roof tint page.

Will the film damage the paint?

Not on original paint in good condition. The risk is with resprayed panels, where the paint may not hold. We warn you beforehand.

Can I have a carbon bonnet in film?

Yes. Textured film imitates carbon fibre in look and touch. It is not real carbon fibre.

How long does it take?

Individual panels take less time than a full wrap. We state the date in the quote according to the scope.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search