3Mfolie.skWindow & car films
Meeting room with glass walls and a frosted band

All of Slovakia

Decorative and frosted films for glass

Frosted film gives glass the look of sandblasted glass for a fraction of the price. It hides the view into a meeting room, bathroom or office. Light still passes through. With a cut-out logo, a glass wall becomes part of your brand.

  • Privacy without losing light
  • Custom logos and patterns
  • No glass replacement

In short

Decorative glass films are frosted, sandblast-effect, coloured or patterned films. They go on glass walls, doors and windows. They give you privacy and mark the glass so nobody walks into it. They also complete a corporate design. We cut them to measure, including logos and lettering.

Materials we install

What decorative film does for you

  • Privacy without darkness

    Frosted film blocks the view but lets light through. Ideal for bathrooms, meeting rooms and entrances.

  • Instead of sandblasting

    It looks like sandblasted glass but can be removed. No need to replace the glass.

  • Custom logo and design

    We cut stripes, patterns or your company logo to your design.

  • Quick installation

    Office partitions can usually be done without stopping work.

Meeting room with a glass wall with a frosted pattern

Where frosted films are used

We can apply the film to the whole surface or only in bands, for example at eye level. Light still passes through; only the view is lost.

  • Glass walls of meeting rooms and offices.
  • Bathrooms, shower enclosures and street-facing windows.
  • Glass doors and entrances.
  • Receptions and surgeries.
  • Shop windows and shop entrances.

Types of decorative film

Decorative films change how glass looks, not how strong it is. They are thin and easy to look after. These are the types we use most:

  • Frosted (sandblast-effect) film – imitates sandblasted glass. For example, Avery Dennison DS Matte i lets through 72 % of light. 3M Scotchcal 5525 gives the look of etched glass.
  • Opal and white film – less see-through. It suits bathrooms and street-facing windows.
  • Cut graphics – a logo, lettering or pattern cut from frosted film. For outdoor use, for example ORAFOL ORACAL 8510 Etched Glass Cal, 0.08 mm thick.
  • Bands – frosting only where people look. The rest of the glass stays clear.
  • Coloured and printed films – colour accents, patterns and corporate graphics.

Privacy by day and by night

Frosted film protects privacy by day and by night. It spreads light equally in both directions.

Mirror film works differently. It gives privacy only when the viewer’s side is darker. In the evening, with the lights on inside, the effect reverses.

One thing worth knowing: with strong light right behind the glass, silhouettes may show through frosted film. Need full screening, for example for a shower by a window? We choose opal or white film.

Marking glass at work

In the workplace, marking glass is a legal duty, not just design. Slovak Government Regulation No. 391/2006 on minimum workplace safety and health requirements says so.

Transparent doors must be suitably marked at the employee’s eye level. Transparent walls and all-glass partitions must be clearly marked and made of safe materials. Or they must be shielded so that nobody is injured by them.

We design the marking to do its job and suit the interior. It can be a band, dots, a logo or lettering.

Is the glass not safety glass, with a risk of injury if it breaks? We add a clear safety film.

Logos, patterns and graphics

We cut a logo, company name or pattern from frosted film to your design. We need it in vector format (AI, EPS, PDF, SVG). This is artwork that can be enlarged without losing quality. If you don’t have one, we can help prepare it.

Before production, we agree the size and position on each pane with you.

For coloured and special-effect elements, we also use ORAFOL films. According to the manufacturer, ORACAL 8510 lasts 7 years on an upright outdoor surface in a Central European climate. So it also suits the outside of shop windows.

Full-coverage advertising graphics are on the shopfronts and signage page.

Film against bird strikes

Birds cannot see clear glass. They see the reflection of sky and trees. Or a view through to greenery on the other side.

Only a pattern that covers the whole pane densely enough helps. Bird protection experts recommend gaps between pattern elements of no more than about 10 cm.

A single raptor silhouette is not enough. Birds simply fly around it and hit the glass next to it.

A pattern works best on the outer face of the glass, where the reflection forms. So we use films made for outdoor use.

Survey and design

At the survey we measure the glass and check the glass type. We agree what the film should hide and what should stay clear.

We hold samples directly against the glass. The difference between frosted and opal film is best seen on site. For smaller jobs, photos and dimensions are enough. We mainly look at:

  • Band height. It depends on whether people behind the glass sit or stand.
  • Light behind the glass in the evening, and whether full screening is needed.
  • Glass type. Film will not stick to textured (patterned) glass.
  • Logo position relative to doors, handles and furniture.
Man cleaning a glazed door with a spray and a cloth

Installation, drying and care

We apply frosted films wet. We clean and wet the glass. We lay the film, squeegee out the water and trim it.

Cut graphics go onto the glass with application tape. So letters and details sit exactly in place. The work is clean and quiet; the office can keep running.

For the first few days, small water pockets or a slight haze may show under the film. With thin films they disappear within about a month.

Don’t wash the film for the first 30 days. After that, clean it with a soft cloth and a cleaner with pH 6–8, without ammonia or abrasives. Don’t use a scraper or razor blade near the edges.

Service life and price

The interior frosted film Avery Dennison DS Matte i has a 12-year warranted life. The exterior ORACAL 8510 lasts 7 years on an upright surface, according to the manufacturer. The price depends on:

  • Area and number of panes.
  • Full coverage or bands. Bands save material but need precise setting out.
  • How complex the graphics are. Small letters and fine details mean more handwork.
  • Interior or exterior, and access to the glass.
  • Removing old film or stickers.

Send dimensions and a photo via the quote form or to m2s@m2s.sk. We will prepare a quote as soon as possible.

Myths about frosted film

  • “Frosted film makes a room dark.” No. DS Matte i lets through 72 % of light. Only the see-through view changes.
  • “I won’t get the film off without damaging the glass.” You will. It peels off smooth glass, and any adhesive residue can be cleaned off.
  • “Sandblasted glass is always better.” Not always. Sandblasting is permanent, and greasy fingerprints stay on the rough surface. Film can be changed at any time without replacing the glass.
  • “A raptor silhouette protects birds.” It does not. You need a dense pattern across the whole pane.

When film is not the answer

  • You need to soundproof a meeting room. Film on glass will not improve sound insulation.
  • The glass is textured (patterned) or rough. Film will not stick to it.
  • You want full darkness, for example in a bedroom. A blind or blackout curtain belongs there.
  • You change the graphics every few weeks. A frame with swappable graphics is more practical.
  • It is fire-resistant glass. We always check the glass maker’s conditions for film first.

Frosted and white films – specifications

Frosted and white films give privacy without a mirror. They work the same by day and at night. Besides the look, they also help against UV and some of the heat.

Avery Dennison · frosted, interior

DS Matte i

A milky frosted film that imitates sandblasted glass. It lets through about 70% of the light, so the room stays bright. Through the glass you see only blurred shapes. With strong light behind the glass, silhouettes may show. Privacy works by day and at night, unlike mirror films.

Thickness
2 mil (approx. 50 µm)
Light transmission
72% (double glazing 66%)
UV rejection
94%
Solar energy rejected
27% (double glazing 31%)
Durability
12 years

Best for: Glass office partitions, meeting rooms, bathrooms, entrance doors.

Reaction to fire B-s1, d0 (hard to ignite, little smoke, no flaming drips). Warranted durability 12 years.

3M · frosted decorative, interior and exterior

Scotchcal 5525

A frosted 3M film that gives the look of sandblasted or etched glass at a fraction of the cost. It comes in two finishes: the fine Haze and the coarser Sandblast. Logos, lettering and patterns can be cut from it, and it can be printed. It goes on glass and acrylic, inside or outside.

Finish
5525-314 Haze (fine), 5525-324 Sandblast (coarse)
Thickness
75 – 80 µm
Service temperature
−40 to +80 °C
Durability
about 4 years

Best for: Patterns and bands on glass partitions, logos on entrance doors, shop windows and bathrooms.

3M data: durability about 4 years, removable without heat.

Avery Dennison · white translucent, exterior

DS White Poly X

A white translucent film for old roof panels made of polycarbonate, acrylic or glass. It spreads the light and cuts it to about 8%. So there is no direct sun or glare underneath, and 77% of the heat is gone. You cannot see through it. It is shading, not a window film.

Light transmission
8%
Reflection out / in
69% / 74%
Solar energy rejected
77%
g-value
0.23
UV rejection
100%
Durability
up to 4 years horizontal

Best for: Yellowed or scratched skylights and canopies, instead of replacing the sheets.

Warranted durability up to 4 years on horizontal installation.

These are figures from Avery Dennison (data sheets, distributor ideo.sk) and 3M (Scotchcal 5525 data sheet). Values are for single glazing, with double glazing in brackets. The g-value is the share of solar heat that gets inside.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for decorative film

Do not clean the film for the first 30 days. Frosted film may look uneven for a few days. It evens out once dry.

Do

  • Wipe fingerprints with a damp soft cloth
  • Water with mild soap
  • Wipe printed film gently, without pressure

Don’t

  • Thinners and alcohol cleaners on printed film
  • Scrapers, razor blades and rough sponges
  • Tape and stickers on the film

Tip from practice: A matte surface holds grease from fingers. On glass doors wipe it more often, but always gently.

Full film care guide

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
Does frosted film let light through?

Yes. For example, Avery Dennison DS Matte i lets through about 72 % of light on single glazing. So the room stays bright. Through the glass you see only blurred shapes.

Can you see through frosted film in the evening with the lights on?

No, privacy works by day and in the evening, unlike mirror films. But with strong light right behind the glass, silhouettes may show. If that matters, for example in a bathroom, we choose opal or white film.

Can you cut out a company logo?

Yes. From your logo in vector format (AI, EPS, PDF, SVG), we cut precise graphics. If you don’t have a vector file, we can help prepare one.

Can frosted film be removed?

Yes, from smooth glass without damage. We peel the film off and clean away any adhesive residue. It is a popular solution in rented premises where you cannot change the glass.

Is the film suitable for a bathroom?

Yes, decorative films cope with humidity. Don’t wash them for the first 30 days. After that, an ordinary glass cleaner without ammonia or abrasives and a soft cloth are all you need.

How long does frosted film last?

The interior Avery Dennison DS Matte i has a 12-year warranted life. The exterior ORAFOL ORACAL 8510 lasts 7 years on an upright surface, according to the manufacturer. This applies to a Central European climate.

What is the difference between frosted, sandblast-effect and opal film?

They are similar films that imitate sandblasted glass. They differ in how see-through they are, their shade and texture. They range from a soft satin look to an almost opaque white. We will show you samples directly on the glass.

Is frosted film suitable for glass partitions in an office?

Yes, it is the most common use. Full-coverage film gives a meeting room privacy. A strip at eye level keeps the space open and makes the glass visible, so nobody walks into it. Light still passes through.

Do glass doors at work have to be marked?

Yes. Under Slovak Government Regulation No. 391/2006, transparent doors must be suitably marked at the employee’s eye level. All-glass partitions must be clearly marked. A band, dots or a logo in frosted film does the job and looks good too.

Does film help prevent birds flying into glass?

Yes, if the pattern is dense enough. Birds cannot see clear glass; they see the reflection of sky and greenery. Gaps between pattern elements should be no more than about 10 cm. A raptor silhouette on its own does not work.

Do you take on small jobs, such as a single door?

Yes. Send us the dimensions and a photo via the quote form or to m2s@m2s.sk. We will prepare a quote as soon as possible.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search