
Bratislava area
PPF for door sills, door edges and the loading edge
Paint wears fastest where you touch the car every day. That means sills, door edges, handles and the boot edge. A small piece of clear film protects them for years.
- Protection for the hardest-worked spots
- The film is almost invisible
- Can be added to any package
In short
PPF for sills and edges is a clear protective film for small, heavily used areas. The loading edge gets scratched when you load luggage or a pushchair. Shoes scuff the sills as you get in. Door edges chip in car parks, and nails and rings scratch the handle cups. We cut the film exactly for your model. Fine scratches on it heal by themselves. We do these parts on their own or together with a PPF package.
What PPF does for you
-
Paint without stone chips
A thick clear film catches stone chips and scratches that would otherwise damage the paint.
-
Light swirls disappear
The top layer self-heals with heat. Sun or warm water is enough.
-
Almost invisible
Gloss PPF keeps the look of the paint. Matte PPF turns a gloss car matte.
-
Higher car value
Original, unrepaired paint helps when you sell or return a lease car.

Which places we protect
- Loading edge of the rear bumper – luggage, pushchair, dog, bicycle. The most often damaged place on a family car.
- Door sills – the painted part you step over. Shoes and grit scuff it.
- Outer sills – the lower panels between the wheels. They catch stones thrown up by the front wheels.
- Door edges – a narrow strip protects the paint when a door opens against a wall or another car.
- Handle cups – where nails and rings leave fine marks.
- Top of the rear bumper and the boot surround – from sitting and unloading.
Why PPF and not ordinary film
PPF is polyurethane about 0.2 mm thick. It is elastic, so it absorbs a knock and does not tear on the boot edge.
Thin clear vinyl films wear through and yellow quickly in these places. PPF is made for this kind of stress.
Fine scratches on it level out by themselves. We describe how on the self-healing PPF page.

Will the film show?
At a normal glance, hardly. We cut the film to the shape of the part and run the edges where the eye does not look.
You will spot the film edge if you search for it up close. After years a thin line of dirt can gather on it. It wipes off easily when washing.
On matte paint we use matte PPF so the spot does not shine.
When it pays off
- New car – the film goes on before the first marks appear.
- Leased car – paint damage is assessed when you hand it back.
- Family car – pushchair, bicycles, dog and skis.
- Dark paint – it shows marks the most.
If you want to protect the front of the car too, see the PPF packages. The track pack includes sills and the loading edge.
What it costs
The price depends on the number of places and the car model. With small parts, labour makes up most of the price, not material. So it pays to combine several places in one visit.
We send the exact price in the quote. Tell us the car model and the places you want protected.
Caring for paint protection film
Do not wash the car for the first few days after application. The adhesive has to bond. We tell you when the first wash is fine at handover.
Do
- Hand wash with a pH-neutral shampoo
- Remove insects and bird droppings quickly
- Light swirl marks disappear with heat (sun, warm water)
- A ceramic coating can go on top of PPF
Don’t
- A pressure washer close to film edges and seams
- Polishing compounds and machine polishing on matte PPF
- Wax on matte PPF (it leaves glossy patches)
- Brush car washes right after application
Tip from practice: The film edges are the most sensitive spot. Do not rub them when washing and keep the nozzle pointed away from them.
Full film care guideUpdated: November 2026
Why bring your car to us
We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.
Legal car films, with paperwork
On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.
Only premium materials, data shown openly
We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.
We tell you when film isn’t the answer
Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.
Instant estimate, free survey
Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.
How it works
From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.
Enquiry or photo
Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.
Free site visit
For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.
Your quote
We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.
Installation and warranty
Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.
Frequently asked questions
Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.
Send us an e-mailWhat is the loading edge?
The top surface of the rear bumper below the boot opening. You load luggage over it, so it gets scratched first.
Can PPF be fitted to just one place?
Yes. We do the loading edge, sills or handle cups on their own too. Combining several places at once works out cheaper, though.
Will the film hide existing scratches?
No. Clear film preserves the paint in the state it is in. We can polish out fine marks before fitting.
Will the film yellow?
Polyurethane PPF from GSWF, Avery Dennison and HOHO has a UV-resistant top coat. GSWF and HOHO give a warranty against yellowing.
Can I fit sill film myself?
A handy amateur can manage a small flat part. Shaped areas and edges need experience, or you get bubbles and lifting corners.
Do you protect interior sills and displays too?
Yes. We describe protection for the display, gloss-black trims and the load area on the interior protection page.
Can the film be removed?
Yes. We remove it with heat. On original paint in good condition it leaves nothing behind.
Related services
-
New PPF paint protection
Invisible protection against stone chips and scratches. Gloss and matte.
Learn more -
Interior and screen protection
Clear film for the screen, gloss black trims, door sills and the boot area.
Learn more -
PPF packages and prices
Partial front, full front, track pack or full car. What each covers and what it roughly costs.
Learn more

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.
A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

