
Bratislava area
PPF or ceramic coating for your paint?
New car, and the question: PPF or ceramic? People often confuse these two kinds of protection. But each does something different. PPF protects paint from stone chips. Ceramic gives it gloss and makes washing easier.
- PPF from GSWF, Avery Dennison and HOHO
- An honest comparison without the marketing
- PPF and ceramic combined
In short
PPF is a physical layer of flexible polyurethane, about 0.15 to 0.2 mm thick. It takes stone chips and scratches instead of the paint. Minor scratches heal with heat. A ceramic coating is a very thin hard layer. It adds gloss, makes washing easier and resists chemical stains better. But it gives almost no protection against stone chips. The two can be combined, as ceramic can also be applied on top of PPF.
What PPF does for you
-
Paint without stone chips
A thick clear film catches stone chips and scratches that would otherwise damage the paint.
-
Light swirls disappear
The top layer self-heals with heat. Sun or warm water is enough.
-
Almost invisible
Gloss PPF keeps the look of the paint. Matte PPF turns a gloss car matte.
-
Higher car value
Original, unrepaired paint helps when you sell or return a lease car.

What PPF is
PPF (paint protection film) is a clear protective film for your paint. It is made of polyurethane, a flexible and tough plastic.
It is about 0.15 to 0.2 mm thick (150 to 200 micrometres). That is more than the thickness of ordinary paper.
A stone from the motorway would otherwise chip the paint. On the film it bounces off or leaves only a mark. The paint underneath stays intact.
The top layer of PPF is self-healing (minor scratches level out by themselves). With GSWF and HOHO, heat is enough, such as sunshine or warm water. For Avery Dennison the maker states healing at room temperature.

What a ceramic coating is
A ceramic coating is a liquid applied to the paint. Once cured, it forms a very thin hard layer.
It is much thinner than PPF. So it does not protect paint from a stone impact.
Its strengths lie elsewhere. It adds deep gloss and water beads off it (the hydrophobic effect). The car is easier to wash and less dirt sticks to it.
It also protects the paint better from chemical stains, for example from bird droppings and insects. You still need to wash them off promptly.
The main differences
- Stone chips – PPF stops them. Ceramic gives almost no protection.
- Scratches – PPF takes deeper ones too, and minor ones heal. Ceramic only reduces fine wash marks.
- Gloss and washing – ceramic wins here. The car is easier to clean and water runs off.
- Chemical stains – both PPF and ceramic protect. But wash off droppings and insects as soon as possible.
- Look – gloss PPF is almost invisible on paint. Matte PPF turns glossy paint matte.
- Removal – we peel PPF off with heat. The paint underneath stays as it was on the day of fitting. Ceramic wears away over time.

PPF and ceramic together
A combination gives the best protection. First PPF on the most exposed panels. Then ceramic over the film and the rest of the paint.
PPF stops stone chips. Ceramic on top makes washing easier and adds gloss.
On film, use a product that the ceramic maker recommends for PPF. On matte PPF, use only products for matte surfaces.
Apply ceramic only once the PPF adhesive has bonded well. We tell you the exact time when you collect the car.
Build your PPF coverage on the 3D model on the page paint protection film.
What to choose based on how you drive
- Lots of motorway driving – PPF at least on the front. Stone chips mainly damage the bonnet, bumper, wings and mirrors.
- Mostly city driving – PPF where contact is frequent. For example sills, door edges and the areas under the handles.
- Mainly gloss and easy washing – ceramic is enough. But it will not help against stone chips.
- New or rare car – PPF on the front or the whole car, with ceramic on top.
- Matte paint – matte PPF. Waxes and polishing would leave shiny patches on matte paint.
Caring for PPF
Do not wash the car for the first few days after fitting. The adhesive needs time to bond well.
After that, wash by hand or touch-free. Do not aim a pressure washer at the film edges from close range.
You will find general film cleaning tips on the page film care.
PPF vs. ceramic coating
| Criterion | PPF | Ceramic coating |
|---|---|---|
| What it is | Clear polyurethane film. | Thin hard coating. |
| Thickness | About 0.15–0.2 mm | Much thinner than PPF |
| Stone chips | Yes, it stops them. | Almost no protection. |
| Minor scratches | Heal by themselves. | Only reduces fine marks. |
| Gloss and easy washing | Gloss PPF enhances the shine. | Yes, that is its main benefit. |
| Chemical stains | Protects. | Protects. |
| Lifespan | Many years. GSWF and HOHO give a 10-year warranty on their main ranges. | Depends on the product and care. |
| Combination | Yes, ceramic can go on PPF. | Yes. |
PPF data are from the makers GSWF, Avery Dennison and HOHO. Ceramic properties vary by product maker.
Caring for paint protection film
Do not wash the car for the first few days after application. The adhesive has to bond. We tell you when the first wash is fine at handover.
Do
- Hand wash with a pH-neutral shampoo
- Remove insects and bird droppings quickly
- Light swirl marks disappear with heat (sun, warm water)
- A ceramic coating can go on top of PPF
Don’t
- A pressure washer close to film edges and seams
- Polishing compounds and machine polishing on matte PPF
- Wax on matte PPF (it leaves glossy patches)
- Brush car washes right after application
Tip from practice: The film edges are the most sensitive spot. Do not rub them when washing and keep the nozzle pointed away from them.
Full film care guideUpdated: November 2026
Why bring your car to us
We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.
Legal car films, with paperwork
On cars we use only approved films with an approval mark. For every job we issue a certificate. You keep it in the car in case of a roadside check.
Only premium materials, data shown openly
We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.
We tell you when film isn’t the answer
Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.
Instant estimate, free survey
Our online form shows an estimated price at the end. For buildings, the survey and measuring are free and without obligation. We then confirm the price based on the real job.
How it works
From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.
Enquiry or photo
Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.
Free site visit
For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.
Your quote
We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.
Installation and warranty
Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.
Frequently asked questions
Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.
Send us an e-mailIs PPF or ceramic better?
It depends on what you want to protect the paint from. PPF protects against stone chips and scratches. Ceramic adds gloss and makes washing easier. Both together work best.
Do you apply ceramic coatings too?
No. We focus on films: PPF, window tinting, car wraps and vehicle graphics. A detailing studio can apply a ceramic coating for you. Put it on PPF only once the film adhesive has bonded well.
Does ceramic protect against stone chips?
Hardly at all. A ceramic layer is too thin to stop a stone impact. For that you need PPF.
Can I put ceramic on PPF?
Yes, this combination is common. Ceramic on PPF makes washing easier and adds gloss. On matte PPF, use only products for matte surfaces.
How thick is PPF?
About 0.15 to 0.2 mm, that is 150 to 200 micrometres. According to the maker, GSWF Defender Platinum is 200 micrometres, Avery Dennison Supreme Protection Film also 200 with the adhesive, HOHO X8 Pro about 190. That is more than the thickness of ordinary paper.
Do scratches heal on ceramic too?
No. Self-healing is a property of the PPF top layer. With GSWF and HOHO, heat is enough, such as sunshine or warm water. For Avery Dennison the maker states healing at room temperature.
How long does PPF last?
Many years with proper care. GSWF and HOHO give a 10-year warranty on their main ranges against yellowing and cracking. GSWF Defender Platinum has an even longer warranty.
Does PPF change how the car looks?
On glossy paint, gloss PPF is almost invisible at a normal glance. Matte PPF turns glossy paint matte. Up close you may see the film edge.
Is PPF worth it on a new car?
Yes, that is exactly when the paint has no chips. Old damage would still show under clear film. So we fit PPF on paint in good condition.
How should I wash a car with PPF or ceramic?
By hand or touch-free. Avoid hard brushes and close-range high pressure on the film edges. Do not wash the car for the first few days after PPF is fitted.
Does PPF protect against bird droppings?
Yes, the paint under the film is protected from chemical stains. But wash off droppings and insects as soon as possible. A stain left for a long time can mark the film surface.
Can PPF be removed later?
Yes. We remove it from original paint in good condition with heat. The paint will look as it did on the day of fitting. With resprayed panels we warn you of the risk in advance.
Which is cheaper, PPF or ceramic?
Ceramic is usually cheaper, because it is a coating. PPF costs more, but it also protects against stone chips. The quote form shows you a guide price for PPF.
Related services
-
New PPF paint protection
Invisible protection against stone chips and scratches. Gloss and matte.
Learn more -
Car wrap and colour change
Full wraps in gloss, matte, satin and effect finishes. The original paint stays protected.
Learn more -
Car window tinting
Dark rear windows and clear safety film for the front. Approved Avery Dennison and 3M films and prices by vehicle type.
Learn more

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.
A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

