
All of Slovakia
Removing old film from windows and cars
Has your old film turned purple, bubbled or started to peel? Do not scrape it off with a razor blade. We remove it professionally, adhesive and all. The glass stays clean and ready for new film.
- Car: €100 incl. VAT
- Windows: €20 per m² incl. VAT
- New film fitted straight afterwards
In short
We remove old film with heat or steam. We warm the film and peel it off slowly. We dissolve adhesive residue with a suitable remover that does not harm the glass or seals. On cars we take care of the heating lines on the rear window. On windows, of the Low-E layer (an invisible layer that keeps heat in). Removing old films from a car costs €100 incl. VAT. From windows it is €20 per m² incl. VAT, with the exact price in the quote. We can fit new film straight away.

Why old film turns purple and bubbles
Cheap tint films are dyed. Their colour comes from dye, not from metal or ceramics.
Dyes break down unevenly in the sun. Some components fade sooner and a purple tone remains. Often within a few years.
Bubbles form when the adhesive ages and lets go. Air gets between the film and the glass. With window films, wrong cleaning or a damaged edge also play a part.
Such film no longer protects as before. It spoils the view and can get in the way when reversing at night.

How we work on a car
- We warm the film with a heat gun or steam. The adhesive softens and the film comes off in one piece.
- We peel the film slowly and at a low angle. That leaves as little adhesive on the glass as possible.
- We dissolve adhesive residue with a suitable remover. Then we clean the glass thoroughly.
- The rear window has heating lines. Near them we use no razor blades or sharp scrapers.
The adhesive of old cheap films often sticks to the heating lines. On old glass the lines can be damaged even with a careful approach. So we cannot give a guarantee on the heating when removing film fitted by someone else. We tell you this in advance.

How we work on windows
We first wet or warm the window film. Then we peel it off the glass in strips.
We remove adhesive residue with a product that does not harm the glass, frame or seals. Then we wash and dry the glass.
Some glass has a Low-E layer (an invisible layer that keeps heat in) directly on the inner surface. Such a layer can be scratched. Near it we work without sharp tools.
Old exterior films tend to be weathered and brittle. Removing them takes longer. At height we work from a platform or scaffolding.
Why not to scrape film off with a razor blade
A razor blade looks like a quick fix. But it often does more harm than good.
- Scratches may stay on the glass. They will show under new film.
- On a car you can cut through the heating lines of the rear window. The heating then stops working.
- On windows you risk damaging the Low-E layer or the seals.
- The film tears into small pieces. The job takes hours and adhesive stays on the glass.
- Harsh solvents can damage seals, plastics and upholstery.
Already started and it is not working? Stop and send photos to m2s@m2s.sk.
What removal costs
- Car – removing old films costs €100 incl. VAT. No guarantee on the rear window heating. Tint prices are on the page car window tinting.
- Windows – €20 per m² incl. VAT. We give the exact price in the quote based on area, film and access.
- New film – we can fit it straight after removing the old one.
The quote form also shows you a guide price. Just tick that there is old film on the glass.
Film removal: car and windows
| Criterion | Car | Windows |
|---|---|---|
| Method | Heat or steam, slow peeling, adhesive remover. | Wetting or heat, peeling in strips, adhesive remover. |
| What we watch out for | Heating lines on the rear window. | Low-E layer, seals and frame. |
| Where | In our Bratislava workshop. | On site, anywhere in Slovakia. |
| Price | €100 incl. VAT | €20 per m² incl. VAT |
| New film | Straight after removal. | Straight after removal. |
Prices are guide prices incl. VAT. We confirm the exact price in the quote. For cars we give no guarantee on the rear window heating.
Preparing for the installation
Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.
Updated: November 2026
Why choose us to fit your film
We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.
We have even worked inside nuclear power plants
We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.
Open shopping centres and work from platforms
Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.
Only premium materials, data shown openly
We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.
We tell you when film isn’t the answer
Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.
How it works
From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.
Enquiry or photo
Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.
Free site visit
For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.
Your quote
We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.
Installation and warranty
Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.
Frequently asked questions
Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.
Send us an e-mailWhy has my car tint turned purple?
Cheap tint films are dyed. The dyes break down unevenly in the sun and a purple tone remains. 3M Color Stable is designed not to turn purple.
How much does it cost to remove old film from a car?
€100 incl. VAT. We can fit new film straight afterwards. We give no guarantee on the rear window heating when removing film fitted by someone else.
How much does it cost to remove film from windows?
€20 per m² incl. VAT. We state the final amount for your area in the quote.
Will the rear window heating get damaged during removal?
Usually not, we work patiently and without a razor blade. But the adhesive of old films sometimes sticks to the lines. On old glass they can therefore be damaged. We warn you in advance.
Can I remove the film myself?
You can, but it is risky. A razor blade can scratch the glass or cut the heating lines. Adhesive often stays on the glass. If it is not working, stop and get in touch.
What removes the adhesive left by film?
A suitable adhesive remover that does not harm the glass or seals. We do not choose harsh solvents. They can damage plastics, upholstery and seals.
How long does film removal take?
It depends on the age and quality of the film. Quality film comes off faster, old cheap film more slowly. We agree the time and date in the quote.
Can exterior film be removed too?
Yes. But weathered exterior film tends to be more brittle and comes off more slowly. At height we work from a platform or scaffolding.
Can new film go on straight after removal?
Yes. We clean the glass after removal and can fit new film straight away.
Will the film leave marks on the glass?
Not with the right method. We remove the adhesive and clean the glass. But old scratches, for example from a razor blade, are not fixed by removing the film.
Does quality film come off more easily?
Usually yes. We remove quality film with heat without damaging the glass. With old cheap films, adhesive often stays on the glass.
Will you remove film fitted by someone else?
Yes. For cars, though, we give no guarantee on the rear window heating. For windows we point out any risks at the site visit.
What do I need to prepare before the film is applied?
Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.
Related services
-
Car window tinting
Dark rear windows and clear safety film for the front. Approved Avery Dennison and 3M films and prices by vehicle type.
Learn more -
Film care
How to clean every window and car film. What is normal after installation and when to call us.
Learn more -
How long does film last?
Lifespan of window film, PPF, tint and wraps, and what shortens it.
Learn more

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.
A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.