3Mfolie.skWindow & car films
Modern apartment building with balconies

All of Slovakia

Window film for flats – against heat, prying eyes and cold

A south- or west-facing flat, big new-build windows, a loft or a neighbour across the street. In a flat you can’t change the façade or fit external blinds as you please. So film fitted from inside is often the simplest answer.

  • Applied from inside, no change to the façade
  • No window replacement or building work
  • Free site visit across Slovakia

In short

For flats we most often fit three types of film. Non-metallic solar control films stop overheating. Frosted or mirror films give privacy. Safety films protect balcony doors. On double and triple glazing we choose a film that won’t make the glass crack from heat. We fit the film from inside, and a non-metallic one barely changes the building’s look. For mirror and exterior films, check the rules with the building manager or owners’ association.

Materials we install

What window film does for you

  • Less heat in the room

    Depending on film and glass, it stops 36 to 85 % of solar energy. Homes and offices stay cooler in summer.

  • Less glare

    You can see your screen and TV even in the sun. No need to keep the blinds down all day.

  • UV protection

    The film stops up to 99 % of UV radiation. Floors, furniture and shop-window goods fade much more slowly.

  • No new windows needed

    We apply film to your existing glass. A flat or house usually takes one day, with no dust or building work.

How much will you save on air conditioning? Enter your glass area and film. The calculator shows how much heat the film stops and what you save.
Sofa in a living room flooded with sun from the window

Why flats overheat and how film helps

Flats overheat because of sun shining through the windows. Sunlight has three parts. About 3 % is UV and 44 % is visible light. The other 53 % is infrared, which you feel as heat.

Through a south- or west-facing window so much comes in that even airing overnight can’t cool the rooms. New builds with floor-to-ceiling windows, corner flats and loft flats suffer most.

Solar control film stops part of this energy at the glass. It works like sunglasses for your window. An example: 3M Prestige 70 Exterior on standard double glazing lets through 63 % of light. It blocks 61 % of solar energy. These are the manufacturer’s figures.

The flat stays bright. A room on the sunny side is typically 2 to 6 °C cooler in practice. The exact difference depends on orientation, glass and ventilation.

  • Windows and balcony doors facing south and west.
  • Loft flats and roof windows.
  • Large glazing in new builds.
  • Glare on the TV and screens when working from home.
  • Fading of floors, curtains and furniture.

Panel block, new build or loft

Before choosing a film, we always check what glass you have. An inside film that absorbs heat also warms the glass itself. On double and triple glazing this can cause thermal stress. The glass heats unevenly and can crack. So we only pick the film once we know the glass type, pane size and shading.

  • Panel block with uPVC windows (double glazing). The most common case. We choose a non-metallic or neutral film suitable for insulating glass.
  • New build with triple glazing or Low-E glass. Low-E is an invisible coating that keeps heat in. We choose inside films carefully here. 3M Prestige Exterior is often better.
  • Loft flat and roof windows. The glass tilts towards the sun and heats up most. We check the glass type and outside access.
  • Older flat with original windows. Single glazing allows a wider choice of films.
  • Balcony and French doors. These are large panes. We check thermal stress and safety.

We explain inside versus outside films on the solar control film page.

In Bratislava we fit film in every city district. See window film in Bratislava.

View from a window onto the neighbouring apartment block

Privacy from neighbours and the street

On the ground floor, opposite another building or by a pavement, we tackle prying eyes in two ways.

Mirror (reflective) films work by day, when it is brighter outside than inside. From outside people see a reflection, while you keep the view. In the evening with the lights on, the effect reverses. Then you need curtains or blinds.

Frosted, sandblast-effect or opal films give privacy day and night. They suit bathroom windows and the lower part of ground-floor windows. Also glass doors and balcony doors visible from next door. They let light through, but not the view.

Safety film for your flat

Safety film for a flat pays off mainly on the ground floor and on balcony doors. A burglar may break the glass but can’t get in within seconds. The shards stay on the film. Families with children value that most.

For ordinary windows and doors, 3M S40 or S70 (EN 12600 2B2) is enough. For the ground floor we recommend a thicker film rated to EN 356. On uPVC windows we fit it under the glazing bead so the glass stays in the frame.

More on safety window film and safety film under the glazing bead.

Do I need the owners’ consent?

For a non-metallic inside film, usually not. It goes on your own window. Non-metallic films such as 3M Prestige barely change the façade. From outside they look like ordinary glass. Owners usually make this kind of change themselves.

Mirror and exterior films that show on the building are different. Does the building have a uniform façade or developer rules? Then check in advance. Ask the building manager or owners’ association, or read the house rules. If needed, we give you a sample and the film’s data sheet for the manager.

How fitting in a flat works

  • Send photos of the windows and rough sizes to m2s@m2s.sk or via the form.
  • At the site visit we check the glass type. We show samples on your window.
  • We clean the windows and apply the film wet. We protect the surroundings.
  • We need about 1 metre of free space in front of the windows.
  • Don’t wash the film for the first 30 days. A slight haze or small water pockets while it dries are normal.

Later, clean the film with a soft cloth and a neutral cleaner. No ammonia or abrasives. The full procedure is in How it works.

Which film for which problem

ProblemRecommended filmWhat to watch out for
Overheating, south and west windowsNon-metallic 3M Prestige solar film (inside or outside)On double and triple glazing we assess thermal stress.
Heat + daytime privacyReflective film, e.g. 3M Silver 35 Exterior or Avery Dennison R SilverMirrored from outside, doesn’t work at night. Check the building rules.
People looking into the bathroom or bedroomFrosted, sandblast-effect or opal decorative filmLets light through, not the view.
Glare on the TV and screensDarker non-metallic film, e.g. 3M Prestige 40 or 3M NeutralLess glare also means less light.
Balcony doors, children, ground floorSafety film 3M S40 or S70 (EN 12600 2B2)Holds the shards together if the glass breaks.
Fading floors and furniture3M Prestige solar films block 99.9 % of UVUV isn’t the only cause of fading. But the risk drops a lot.

Values from 3M manufacturer data (EN 410 / NFRC standards). We give the exact figures for your glass in the quote.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for window film

Do not clean the film for the first 30 days. A light haze and small water bubbles are normal. They disappear on their own as the film dries. In winter this takes longer.

Do

  • Plenty of water with a drop of mild detergent (no ammonia)
  • Soft microfibre cloth
  • Rubber squeegee for the remaining water
  • Clean exterior film just as gently as interior film

Don’t

  • Razor blades, scrapers and rough sponges
  • Cleaners with ammonia or grit
  • Stickers, tape and suction cups on the film
  • A pressure washer close to the edges of exterior film

Tip from practice: When you clean the frames, take care of the film edges. Do not lift them with a fingernail or cloth.

Full film care guide

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
Will the film make my flat dark?

Not necessarily. Non-metallic 3M Prestige 70 films let through about 63 to 71 % of light, depending on the glass. They look brighter than the figure suggests. We only choose darker films where you want less glare or more privacy.

Can film be applied to uPVC windows in a panel block?

Yes. Most panel blocks now have uPVC windows with double glazing. We choose a film that avoids thermal stress. The film doesn’t affect the frame or hardware.

Do I need the consent of the owners’ association or building manager?

For a non-metallic inside film, usually not. It barely changes the façade. For mirror or exterior films that show on the building, check the house rules with the manager or association first.

Will film help in a loft flat with roof windows?

Yes. Roof windows are the biggest source of heat in a loft. We check the glass type, pitch and access. Then we choose an inside or outside solar film.

Will film replace air conditioning?

Not entirely. But it greatly cuts the heat the air conditioning has to remove. In many flats film plus ventilation is enough. Elsewhere the air conditioning runs shorter and quieter.

Which film stops the neighbours seeing into my flat?

By day, a mirror film. It works when it is brighter outside than inside. Want privacy in the evening too? Choose frosted or sandblast-effect film for the part of the window people can see into.

Does film interfere with Wi-Fi or mobile signal?

Non-metallic 3M Prestige films don’t. With metallic reflective films, we tell you about any possible effect in advance.

Can the film be removed when I move out?

Yes, we remove it without damaging the glass. If you rent out the flat, this is simpler than external blinds.

How long does film last in a flat?

Interior films typically last 10 to 15 years or more. We state the manufacturer’s warranty for the chosen film in the quote.

How much does window film for a flat cost?

It depends on the film type and the number and size of windows. Example: 6 m² of 3M Prestige fitted inside in Bratislava comes to about €789 incl. VAT. More examples are in how much window film costs. Send photos and sizes to m2s@m2s.sk or via the form. We will prepare a guide price as soon as possible. The site visit is free.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search