3Mfolie.skWindow & car films
Hand setting the temperature on a room thermostat

All of Slovakia

Energy savings with 3M Prestige

How much will the film save? That depends more on your building than on the film. So we will not give you one universal percentage. Instead, here is a simple way to estimate the saving yourself. Plus the manufacturer’s data and a worked example.

  • Estimate your saving in 5 steps
  • Up to 66 % less solar heat on double glazing
  • Worked example with every assumption

In short

3M Prestige saves mainly on cooling. Exterior versions cut solar heat through double glazing by 21 to 66 %. What that means in euros depends on orientation, glass area, air conditioning, heating and energy prices. A 3M simulation of an office in Prague shows a net saving over 10 years. It is 10.7–14.8 kWh of primary energy per m² of window. In Rome it is 38.5–41 kWh. Here, then, Prestige mainly solves overheating and comfort. It saves a lot in glazed, air-conditioned buildings facing south and west.

Materials we install

What 3M Prestige does for you

  • Looks like ordinary glass

    Prestige hardly reflects (5–9 %). No mirror look outside, so the building looks the same.

  • Strong heat protection

    On double glazing it stops up to 76 % of solar energy, depending on the grade. It lets in more light than you would expect.

  • Does not block signal

    The film is metal-free. Mobile, 5G, Wi-Fi and GPS keep working normally.

  • 99.9 % UV protection

    It protects people and interiors from UV. Furniture and floors keep their colour longer.

How much will you save on air conditioning? Enter your glass area and film. The calculator shows how much heat the film stops and what you save.

Estimate your saving in 5 steps

Estimate the annual saving roughly with these points:

  • 1. Orientation. West and south-west windows save the most. South saves a medium amount, as summer sun is high. East saves less, north almost nothing.
  • 2. Glass area. Compare it with the floor area. Glazed offices and atriums save the most.
  • 3. Air conditioning. Without it you save no electricity, but you gain comfort. With an older, weaker unit and dearer electricity you save more. A low SEER (seasonal cooling efficiency) shows a weaker unit.
  • 4. Heating. The film also takes some winter sun. With a heat pump this loss costs less than with direct electric heating.
  • 5. Operation and glass. Buildings that also cool in spring and autumn save more. Exterior film on double glazing cuts solar heat 2–3× more than interior film.

Do most points say “a lot” for you? The saving will be noticeable. No air conditioning, or windows facing north? Count mainly on comfort, not savings.

Why the film saves energy

The film stops the sun’s heat at the glass. The air conditioning then does not have to remove heat that never got in.

Sun hitting a window splits into three parts. Some is reflected. Some is absorbed by glass and film. The rest passes into the room. Absorbed heat warms the glass, which gives it off to both sides.

Heat passing straight through plus heat given off inwards make the g-value. That is how much solar energy gets into the room.

Prestige is spectrally selective (it lets in more light than heat). Visible light carries 44 % of solar energy and mostly passes through. Infrared carries 53 %, and the film reflects most of it.

Film on the outside has an advantage. Heat it absorbs stays on the outer pane, and outdoor air carries it away. That is why Prestige 70 Exterior has g = 0.39 on double glazing. Prestige 70 Interior has 0.58.

Empty room with sun shining through the windows onto a wooden floor

How many degrees cooler will it be?

There is no exact figure. It depends on ventilation, the room’s thermal mass, glass area and air conditioning. In rooms without cooling in direct sun, installers commonly quote 2–6 °C. That is field experience, not a standard value.

A controlled test used two identical test rooms (Energies journal, 2024, Taiwan). There a reflective film cut air temperature by up to 4.5 °C. Air-conditioning electricity fell by 3 to 10 %, depending on orientation. An absorbing film had a smaller effect.

Comparing g-values is more reliable than degrees. It tells you directly how much less solar heat gets in.

What the 3M simulations showed

For Prague the net saving is 10.7 to 14.8 kWh per m² of window over 10 years. Of the published cities, Prague is the closest in climate to Bratislava.

The data comes from the environmental declaration (EPD) for Prestige 70 Exterior. In it, 3M simulated an office in EnergyPlus. It had four floors, 725 m² of glass and east-facing windows. It used gas heating and electric cooling. The film’s lifetime was 10 years.

The result is a net saving of primary energy (energy including losses in production and transmission) per m² of window. Higher winter gas use is already deducted.

Single and double glazing: Prague 10.7 and 14.8 kWh/m². Warsaw 15.8 and 19.5. Rome 38.5 and 41. Athens 62.3 and 65.2. The warmer the climate, the bigger the benefit.

In its sustainability paper 3M quotes “up to 205 kWh/m² of window”. That is the upper limit from the best-case scenarios. It is not a typical value for Slovakia.

The simulation assumes east-facing windows. West and south-west façades with afternoon sun save more. So do buildings with higher internal gains (people, computers). And buildings that also cool in spring and autumn. North windows save almost nothing.

Hidden saving: smaller air conditioning

Air conditioning is sized for the hottest summer afternoon, not the yearly average. The film cuts that peak straight away.

Example: 30 m² of south-west glass and sun at about 600 W/m². Prestige 70 Exterior on double glazing cuts peak solar gain by about 5.6 kW. That equals one larger or two smaller wall-mounted AC units.

Is your air conditioning struggling, or are you planning to add more? The film may save an extra unit and its running costs. This does not show in the annual energy balance. In a company budget it is often the biggest item.

Glazed office space with tables and large windows

Benefits you cannot count in kWh

  • less overheating in rooms without cooling (attics, top-floor flats)
  • 20–77 % less glare depending on type – easier work at a screen
  • 99.9 % UV protection – floors, furniture and goods fade less
  • more even temperature between the sunny and shaded sides of a building
  • no change to the façade, no moving parts, and it works in wind too

Want a calculation for your building? Send us the window orientation and glass area. Add details of cooling and heating, ideally energy bills too. We will help you balance savings, light and comfort.

Savings in 3M data

The first chart shows how much less solar heat gets in compared with glass without film. The second shows the net primary-energy saving from the 3M simulation. Higher winter heating use is already counted in it.

What the solar energy hitting a window is made of

UV ~3 % fades furniture, floors and goods. Quality films block more than 99 % of it.

Light ~44 % is what we want to keep. Visible light carries heat too, so even a clear film needs a selective technology.

Infrared ~53 % is invisible heat. Spectrally selective films (e.g. 3M Prestige) stop much of it without darkening the view.

How much less solar heat gets in Drop in g-value compared with glass without film, 3M data (EN 410).
  • Single glazing 6 mm
  • Clear double glazing
Prestige 90 Exterior
21 % – Single glazing 6 mm
21 % – Clear double glazing
Prestige 70 Exterior
41 % – Single glazing 6 mm
45 % – Clear double glazing
Prestige 50 Exterior
51 % – Single glazing 6 mm
56 % – Clear double glazing
Prestige 40 Exterior
53 % – Single glazing 6 mm
59 % – Clear double glazing
Prestige 20 Exterior
58 % – Single glazing 6 mm
66 % – Clear double glazing
Prestige 70 Interior
39 % – Single glazing 6 mm
17 % – Clear double glazing
Prestige 40 Interior
51 % – Single glazing 6 mm
24 % – Clear double glazing

Interior films lose much of their effect on double glazing. Heat they absorb stays on the room side.

Show as a table
MetricSingle glazing 6 mmClear double glazing
Prestige 90 Exterior21 %21 %
Prestige 70 Exterior41 %45 %
Prestige 50 Exterior51 %56 %
Prestige 40 Exterior53 %59 %
Prestige 20 Exterior58 %66 %
Prestige 70 Interior39 %17 %
Prestige 40 Interior51 %24 %
Net primary-energy saving over 10 years – Prestige 70 Exterior kWh per m² of window. 3M simulation: office, east-facing windows, gas + electric cooling.
  • Single glazing
  • Double glazing
Prague
10.7 kWh/m² – Single glazing
14.8 kWh/m² – Double glazing
Warsaw
15.8 kWh/m² – Single glazing
19.5 kWh/m² – Double glazing
Berlin
18.2 kWh/m² – Single glazing
22.1 kWh/m² – Double glazing
Paris
20.8 kWh/m² – Single glazing
25 kWh/m² – Double glazing
Rome
38.5 kWh/m² – Single glazing
41 kWh/m² – Double glazing
Madrid
50.7 kWh/m² – Single glazing
53.8 kWh/m² – Double glazing
Athens
62.3 kWh/m² – Single glazing
65.2 kWh/m² – Double glazing

Primary energy: electricity × 3.163, gas × 1.092. The values are net. The simulation counts higher gas use in winter and lower electricity use in summer. Bratislava is not on the list; Prague and Warsaw are closest in climate.

Show as a table
MetricSingle glazingDouble glazing
Prague10.7 kWh/m²14.8 kWh/m²
Warsaw15.8 kWh/m²19.5 kWh/m²
Berlin18.2 kWh/m²22.1 kWh/m²
Paris20.8 kWh/m²25 kWh/m²
Rome38.5 kWh/m²41 kWh/m²
Madrid50.7 kWh/m²53.8 kWh/m²
Athens62.3 kWh/m²65.2 kWh/m²

What the values mean

g-value
How much solar energy gets into the room. The g difference without and with film, times the incoming sun, is heat the AC does not have to remove.
Primary energy
Energy including losses in production and transmission. A kilowatt-hour of electricity “weighs” more than one of gas. So cooling savings look bigger.
SEER
Seasonal cooling efficiency. How many kWh of cooling an AC unit makes from 1 kWh of electricity.
Peak load
The highest heat output the cooling must remove. It sets the size of the AC.

Source: 3M Prestige product sheets (EN 410). 3M EPD Prestige 70 Exterior S-P-00992, energy-saving chapter (EnergyPlus simulation, 10 years). 3M white paper on the sustainability of Prestige films (EMEA). Huang et al., Energies 17(6) 1388, 2024.

Worked example: an office in Bratislava

StepAssumption or calculationResult
Building30 m² of south-west glass. Clear double glazing without low-E. Air conditioning, gas boiler.–
FilmPrestige 70 Exterior: g 0.70 → 0.39 (3M data)g difference = 0.31
Sun in the cooling seasonassumption: 550 kWh/m² on a vertical SW façade (April–September)30 × 550 × 0.31 = 5,115 kWh less heat
Share the AC would removeassumption: 50 % (when cooling runs)≈ 2,560 kWh of cooling
Electricity for coolingassumption: SEER 3.5; electricity €0.22/kWh≈ 730 kWh → ≈ €160 a year
Less winter sunassumption: 300 kWh/m² (October–March), 35 % useful30 × 300 × 0.31 × 0.35 ≈ 980 kWh of heat
More gasassumption: boiler 90 %, gas €0.09/kWh≈ 1,090 kWh → ≈ €98 a year
Net annual saving€160 − €98≈ €60 a year (≈ €2 per m² of glass)
Lower summer peakassumption: 600 W/m² on the façade on a summer afternoon30 × 0.6 × 0.31 ≈ 5.6 kW

Illustrative example, not a promise of savings. Inputs marked as assumptions are rounded estimates. They only show the method. The saving comes out higher if the building also cools in spring and autumn. The same goes for a heat pump, dearer electricity or a west façade. In a house without air conditioning the energy saving is zero or slightly negative. The benefit there is comfort. You get the calculation for your building in the quote.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for window film

Do not clean the film for the first 30 days. A light haze and small water bubbles are normal. They disappear on their own as the film dries. In winter this takes longer.

Do

  • Plenty of water with a drop of mild detergent (no ammonia)
  • Soft microfibre cloth
  • Rubber squeegee for the remaining water
  • Clean exterior film just as gently as interior film

Don’t

  • Razor blades, scrapers and rough sponges
  • Cleaners with ammonia or grit
  • Stickers, tape and suction cups on the film
  • A pressure washer close to the edges of exterior film

Tip from practice: When you clean the frames, take care of the film edges. Do not lift them with a fingernail or cloth.

Full film care guide

Updated: November 2026

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
How can I estimate the saving myself?

With the five points on this page. They are orientation, glass area, air conditioning, heating and how the building runs. The energy-saving calculator gives a quick estimate in euros.

How much will I save with 3M Prestige?

It depends on the building. The film cuts solar heat through double glazing by 21–66 % depending on type. In euros, orientation, glass area, cooling, heating and energy prices decide. Send us the details and we will estimate the saving for your building.

How many degrees cooler will the room be?

In rooms without cooling in direct sun, 2–6 °C is quoted in practice. A controlled study (Energies, 2024) measured up to 4.5 °C with a reflective film. Comparing g-values is more precise – how much solar heat gets in.

Where does window film save the most?

In air-conditioned, glazed buildings with windows facing west and south-west. Least for north windows and without air conditioning. There the main benefit is comfort. The worked example is further up this page.

Will film replace air conditioning?

Usually not, but it makes its job easier. In our example with 30 m² of south-west glass, the summer peak drops by about 5.6 kW. That can save an extra unit. With less glass, ventilation is often enough to handle overheating.

Will I spend more on heating in winter?

Slightly, as the film also takes some winter sun. The 3M simulation counts this, and offices still save. In a house without air conditioning and with large south windows it can be the other way round. More on the summer and winter page.

Where do the 3M simulation figures come from?

From the environmental declaration (EPD) for Prestige 70 Exterior. It is registered with EPD International under number S-P-00992. It simulates a model office in EnergyPlus for 56 cities in 35 countries.

Is it true that film saves 205 kWh per m²?

That is the upper limit of 3M’s best-case scenarios. For Prague the 3M simulation gives 10.7–14.8 kWh/m² over 10 years. That is about a third of the Rome figure. In Slovakia, expect much less than in southern Europe.

Which film saves the most?

On double glazing, the darker Exterior types. Prestige 40 Exterior cuts solar heat by 59 %, Prestige 20 Exterior by 66 %. Want to keep the light? Prestige 70 Exterior cuts heat by 45 % and lets through 63 % of light.

Is film worth it on north windows?

Not for energy. On the north side we recommend it only against glare reflected from nearby buildings. Or for UV protection, for example in shop windows.

Can you calculate the saving for our building?

Yes. Send window orientation and area, glass type and details of cooling and heating, ideally energy bills too. Use the form or m2s@m2s.sk. For larger buildings we suggest checking the calculation with your energy auditor.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search