3Mfolie.skWindow & car films
Bright office with desks next to the windows

All of Slovakia

Office window film – against heat, glare and prying eyes

In the afternoon nobody can work by the window. Screens glare and the blinds stay down. Everyone walking past can see into the meeting room. We solve these glass problems with film. No building work and no break in your work.

  • Installation in the evenings and at weekends
  • Invoice and procurement documents
  • 25 years of experience with buildings
  • Certified for work at height

In short

In offices we fit three kinds of film. Solar control films stop overheating and screen glare. Frosted and decorative films go on glass partitions and meeting rooms. Safety films protect the ground floor. We work in sections, outside working hours or at weekends. All our installers are certified for work at height and for operating aerial work platforms and walkways. We supply data sheets, an invoice and documents for facility management or procurement.

Materials we install

What window film does for you

  • Less heat in the room

    Depending on film and glass, it stops 36 to 85 % of solar energy. Homes and offices stay cooler in summer.

  • Less glare

    You can see your screen and TV even in the sun. No need to keep the blinds down all day.

  • UV protection

    The film stops up to 99 % of UV radiation. Floors, furniture and shop-window goods fade much more slowly.

  • No new windows needed

    We apply film to your existing glass. A flat or house usually takes one day, with no dust or building work.

How much will you save on air conditioning? Enter your glass area and film. The calculator shows how much heat the film stops and what you save.
Laptop on a desk in harsh sunlight from the window

Overheating in open-plan offices

In glazed offices, cooling often costs more than heating. Heat comes from big windows, computers, lights and dozens of people. But most heat comes through the glass, before the air conditioning can deal with it.

Solar control film stops part of the solar energy at the glass. Here are 3M’s figures for standard double glazing. 3M Prestige 70 Exterior blocks 61 % of solar energy and lets through 63 % of light. The darker Prestige 40 Exterior blocks 71 % and lets through 37 % of light.

At desks on the sunny side this typically means 2 to 6 °C less in practice.

What the regulation says about workplace temperature is explained on office and building overheating.

  • Offices with south- and west-facing windows.
  • Corner meeting rooms with two glazed walls.
  • Glazed façades and atriums of office buildings.
  • Receptions and entrance halls.

No screen glare, blinds up

Film cuts glare, so people can work by the window. Closed blinds mean artificial light all day and no view.

According to 3M, 3M Prestige 70 cuts glare by about 20 %. 3M Neutral 35 Exterior cuts it by 50 %. 3M Prestige 40 Exterior by 52 %.

Non-metallic 3M Prestige films reflect little. The windows don’t look mirrored from outside, and there are no distracting reflections inside. They don’t block mobile signal, 5G or Wi-Fi either. That matters in an office.

Meeting room with glass walls and a frosted band

Glass partitions, meeting rooms and receptions

Glass partitions let light through but give no privacy. Frosted, sandblast-effect and decorative films solve that. We fit them to whole panes, in bands at eye level or with a gradient. We can cut your logo, room names or patterns to match your corporate design.

  • Frosted bands for meeting rooms and management offices.
  • Logo and brand colours at reception and the entrance.
  • Contrasting markings on glass walls so nobody walks into them.
  • Films for glass doors and lift shafts.
  • Replaceable designs for rebranding or a change of tenant.

Security for offices and data

Safety films for offices hold broken glass together and make entry harder. They suit the ground floor, server rooms and areas with valuables.

There we use, for example, 3M Ultra S800. It meets EN 12600 1B1 and EN 356 P1A on 4 and 6 mm glass. EN 12600 shows whether broken glass injures people. EN 356 shows how long glass resists being broken through. The three-ply 3M S140 is even stronger (EN 356 P2A).

For glass partitions and doors a thinner S40 or S70 (EN 12600 2B2) is enough. It protects people from injury.

On ground floors with uPVC or aluminium windows we fit the film under the glazing bead. Broken glass then stays in the frame and a burglar loses time. More on safety film under the glazing bead.

Need privacy from the street too? We combine safety film with frosted film. Or we choose 3M Ultra Prestige S70. It combines safety and heat protection in one layer.

Empty office floor with windows all around

Fitting without interrupting work

We fit office film in sections. We work after hours, at weekends or floor by floor. We agree the times with the building manager.

The film is applied wet, with no dust and no building work. We need about 1 metre of free space by the windows. Please move desks away beforehand. Or tell us and we will plan for it.

  • Site visit and assessment of the glass on every façade.
  • Film samples directly on your windows.
  • Schedule by floor and around operations.
  • Handover with data sheets and warranty terms.

Invoicing, procurement and ESG

We invoice companies. For state and public bodies we prepare the film’s technical specification. We supply data-sheet values (EN 410 / NFRC standards), references and other documents the authority needs. More about large buildings on the Businesses and public buildings page.

Need data for ESG reporting (reporting a company’s environmental impact) or a building energy assessment? We state two values for your glass. TSER shows how much solar energy the film blocks. The solar factor g shows how much solar heat gets in.

Less heat means the air conditioning runs for less time. But we only calculate savings honestly for a specific building. We don’t quote a blanket percentage.

Which film for which problem

ProblemRecommended solutionWhy
Overheating by the windows3M Prestige 70 or 50 (inside / outside)Plenty of light, less heat, almost no reflection.
Strong screen glare3M Prestige 40, 3M Neutral 35Glare cut by 50 % or more.
Large areas, price-sensitiveReflective ranges, e.g. 3M Silver 35 Exterior, Avery Dennison R SilverHigh heat rejection, mirrored façade.
Meeting-room privacyFrosted and decorative films from 3M, Avery Dennison, ORAFOLLight gets through, the view doesn’t.
Ground floor, break-ins, vandalism3M Ultra S800, S140Certified to EN 12600 and EN 356.

Values from 3M manufacturer data (EN 410 / NFRC), 6 mm glass or standard double glazing. We give them for your glass in the quote.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for window film

Do not clean the film for the first 30 days. A light haze and small water bubbles are normal. They disappear on their own as the film dries. In winter this takes longer.

Do

  • Plenty of water with a drop of mild detergent (no ammonia)
  • Soft microfibre cloth
  • Rubber squeegee for the remaining water
  • Clean exterior film just as gently as interior film

Don’t

  • Razor blades, scrapers and rough sponges
  • Cleaners with ammonia or grit
  • Stickers, tape and suction cups on the film
  • A pressure washer close to the edges of exterior film

Tip from practice: When you clean the frames, take care of the film edges. Do not lift them with a fingernail or cloth.

Full film care guide

Where we have worked

We have worked inside the Jaslovské Bohunice and Mochovce nuclear power plants. That meant security clearance and the strictest health and safety rules. We fitted film in open shopping centres in sections and from platforms. In Comenius University buildings we worked while teaching went on.

  • Aupark
    Shopping centre
  • Eurovea, Bratislava
    Shopping centre
  • Slovenské elektrárne, Jaslovské Bohunice and Mochovce nuclear power plants
    Energy
  • Slovnaft, Bratislava
    Refinery
  • Autopolis, Bratislava
    Car dealer
  • Bratislava
    University
  • Bratislava
    Shopping centre
  • Prievidza
    Shopping centre

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
How much cooler will the office be after film is applied?

At desks on the sunny side, typically 2 to 6 °C in practice. It depends on the orientation, glass and film. In the quote we state the solar energy rejection for your glass from the data sheet.

Can you work outside office hours or at weekends?

Yes. We regularly do offices after hours, at weekends or floor by floor. Your work doesn’t have to stop.

Which film is best against screen glare?

Darker non-metallic films, such as 3M Prestige 40 or 3M Neutral 35. They cut glare by about half. We show you samples on the window. You see how much light remains.

Can you put our logo on a glass partition?

Yes. We cut logos, room names and patterns from frosted or coloured films. We apply them to partitions, doors and reception.

Will the film affect mobile signal or Wi-Fi in the office?

Non-metallic 3M Prestige films don’t. With metallic reflective films, we tell you about any possible effect in advance.

Is film suitable for a glazed façade with insulating glass?

Yes, if it is chosen correctly. Large insulating units risk thermal stress (cracking from uneven heating). So we often choose film on the outside. We assess this during the site visit.

Do you provide an invoice and procurement documents?

Yes. We issue an invoice. We prepare the technical specification, data sheets, references and other documents the authority needs.

Will film reduce air conditioning costs?

Yes. Less heat through the glass means less load on the air conditioning. The saving depends on the building, so we don’t quote a blanket figure. We supply the data for the calculation.

How long does film last in an office?

Interior films typically 10 to 15 years or more. Exterior 3M Prestige 10 to 15 years. We state the manufacturer’s warranty in the quote.

How quickly can you prepare a quote?

Send photos, sizes and window orientation to m2s@m2s.sk or via the form. We will reply as soon as possible. We will arrange a free site visit.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search