
All of Slovakia
Security film and insurance: classes and documents
Insurers increasingly ask for glazing secured to a specific class. We help you find out exactly what they want. We propose a film and supply the documents.
- EN 356 and EN 12600 classes
- Fitting documents for the insurer
- Fitted across Slovakia
In short
An insurer usually asks that glass meet a class under EN 356 or EN 12600. EN 356 covers resistance to attack, EN 12600 the protection of people on impact. 3M security films reach EN 356 classes P1A to P2A on suitable glass. With fitting we supply the film data sheet, the manufacturer’s test document and a certificate of application. Check beforehand whether your insurer accepts film on glass. Send us the wording of their requirement.
What safety film does for you
-
Glass does not scatter
If the glass breaks, the film holds the shards together and protects people from cuts (tested to EN 12600).
-
Slows down burglars
Selected thick films have an EN 356 resistance class. Getting through the glass takes longer and makes noise.
-
Almost invisible
Clear safety films let through 85 % of light or more. Your windows look the same.
-
UV and sun as well
They stop 99 % of UV. Combined films also reduce heat.

What an insurer usually wants
The policy or its terms usually describe how windows, doors and shop fronts must be secured. Often a specific resistance class is named.
Sometimes a general wording is enough, such as security film or safety glass. At other times the insurer wants class P1A, P2A or higher.
If the condition is not met, the insurer may reduce the payout after a loss. So it pays to read the requirement exactly.
Two standards, two purposes
- EN 12600 – protection of people. It is tested by the impact of a soft body. It tells whether glass breaks into dangerous shards when a person hits it.
- EN 356 – resistance to attack. Classes P1A to P5A are tested by dropping a steel ball. Classes P6B and above with an axe.
For burglary protection insurers ask for EN 356. For protecting people, in schools and shops for example, EN 12600 is used. Details on the safety films page. We cover the two most common classes separately: EN 356 P1A and EN 356 P2A.

What film can do and where it ends
3M security films reach classes P1A to P2A on suitable glass. Examples are 3M Scotchshield Ultra S800 and S140.
A class always applies to the combination of film and glass from the test. The same film on thinner glass may not meet the class. That is why we need to know the type and thickness of your glass.
Classes P3A to P5A usually call for laminated safety glass. For P6B and above, safety glass always belongs in the frame. If film is not enough, we will tell you.
Documents you get from us
- the exact designation and data sheet of the film used
- the manufacturer’s test documents under EN 12600 and EN 356 for the given glass combination
- a certificate of application with scope, date and place
- for fitting under the glazing bead, a description of the method too
We prepare the documents in advance so you can show them to the insurer before fitting.
Film under the bead: so the glass stays in the frame
Film holds the glass together. But if it ends short of the frame, the whole pane can be pushed in.
On PVC and aluminium windows we therefore run the film under the glazing bead. Broken glass then stays in the frame. More on the security film under the bead page.
How to proceed
- 1. Find the exact wording of the requirement in the policy or the insurer’s letter.
- 2. Send it to us with the glass type, dimensions and photos of the windows.
- 3. We propose a film and prepare the documents.
- 4. Confirm with the insurer that they accept the solution. Preferably in writing.
- 5. We fit the film and hand over the certificate of application.
Classes insurers most often state
| Class | Test | What it means |
|---|---|---|
| EN 12600 2B2 | 50 kg pendulum from 450 mm | Protection of people in an ordinary impact; shards stay on the film |
| EN 12600 1B1 | 50 kg pendulum from 1,200 mm | The highest class of protection for people |
| EN 356 P1A | 4.11 kg ball, 3 drops from 1.5 m | Basic resistance to a thrown object |
| EN 356 P2A | 4.11 kg ball, 3 drops from 3 m | Higher resistance – ground floors, shops, shop windows |
| EN 356 P3A – P5A | Ball from 6 m or 9 m | Usually laminated safety glass; assessed individually |
A class applies to the combination of film and glass from the test. We state the exact film, glass and fitting method in the quote.
Preparing for the installation
Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.
Caring for safety film
Thick safety film dries longer than thin solar film. Haze and bubbles can stay for several months. Do not clean it for the first 30 days.
Do
- Water with a mild, ammonia-free cleaner
- Soft cloth and rubber squeegee
- Check the film edges and glazing beads once a year
- Report damaged sealant or beads to us straight away
Don’t
- Drilling or screws through the film
- Removing sealant or beads at the edges
- Razor blades, scrapers and rough sponges
- Stickers and suction cups on the film
Tip from practice: If we laid the film under the glazing bead, the bead is part of the protection. Contact us before you replace beads or seals.
Full film care guideUpdated: November 2026
Why choose us to fit your film
We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.
We have even worked inside nuclear power plants
We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.
Open shopping centres and work from platforms
Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.
Only premium materials, data shown openly
We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.
We tell you when film isn’t the answer
Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.
How it works
From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.
Enquiry or photo
Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.
Free site visit
For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.
Your quote
We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.
Installation and warranty
Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.
Frequently asked questions
Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.
Send us an e-mailWill the insurer accept security film?
It depends on the insurer and the policy wording. Some accept film with a class document, others want certified safety glass. Check beforehand, preferably in writing.
What does class P2A mean?
The glass withstands three drops of a 4.11 kg steel ball from 3 m without being penetrated. It is a test under EN 356.
Which film meets P2A?
For example 3M Scotchshield S140 or Ultra S800 on suitable glass. A class always applies to the combination of film and glass from the test.
Which documents do I get?
The film data sheet, the manufacturer’s test document under EN 356 or EN 12600, and a certificate of application with scope, date and place.
Is film enough for class P4A or P6B?
Usually not. Classes P3A to P5A generally require laminated safety glass. For P6B and above, safety glass belongs in the frame.
Will film lower my premium?
That is for the insurer to decide. We can supply film with class documents. The insurer decides on discounts and policy terms.
Do you fit outside Bratislava?
Yes, across Slovakia. We charge travel at €0.45 per km incl. VAT, there and back, at least €30.
What do I need to prepare before the film is applied?
Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.
Related services
-
Safety films
Broken glass holds together. Protects against break-ins and shards, EN 12600 and EN 356 classes.
Learn more -
Films for banks
Bank branches, jewellers, post offices and critical infrastructure.
Learn more -
Safety film under the bead
We tuck the film edge under the glazing bead. Broken glass stays firmly in the frame.
Learn more

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.
A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.