3Mfolie.skWindow & car films
Cracked safety glass that still holds together

All of Slovakia

EN 356 P1A: security film for glass

P1A is the first class of the EN 356 standard. It says the glass resisted a thrown object. Ordinary window glass usually does not have this class. With security film, the window you already have can reach it. We explain what the test means, which films reach P1A and when P2A is the better choice.

  • 4.11 kg ball, three drops from 1.5 m
  • 3M and Solar Screen films with paperwork
  • Fitted under the glazing bead too

In short

EN 356 P1A is the lowest of eight classes of glass resistance to manual attack. In the test a 4.11 kg steel ball is dropped three times from 1.5 m onto a pane of 1,100 × 900 mm. The ball must not pass through. Ordinary glass with security film can reach P1A. Examples are 3M Scotchshield Ultra S800 on 4 and 6 mm glass and Solar Screen Safety Clear 8 C. The class always applies to the film together with the glass the maker tested it on. P1A mainly protects against vandals and a thrown stone. For ground floors and shop windows we recommend the higher class P2A.

Materials we install

What EN 356 P1A means

EN 356 is the European standard for security glazing. It grades glass by how well it resists manual attack.

The standard has eight classes. Classes P1A to P5A are tested with a falling steel ball. The ball stands in for a thrown stone or another hard object. Classes P6B to P8B are tested with a hammer and an axe.

P1A is the first class. The number 1 is the level of resistance. The letter A means the falling-ball test.

Measuring a window frame with a folding rule

How the P1A test works

The test piece is a pane of 1,100 × 900 mm, clamped in a test frame.

  • Ball: steel, 100 mm in diameter, 4.11 kg.
  • Drop height: 1.5 m. Each impact carries about 60 J.
  • Number of impacts: three. The impact points form a triangle around the centre of the pane.
  • Result: the ball must not pass through. The glass itself may crack.
  • Repeat: three identical panes must pass.

With film, the glass is tested together with the film on it. The result is a class for the whole build-up, not for the film alone.

What P1A means in practice

Glass with class P1A cracks, but it does not fall apart and no opening forms. The pieces stay on the film.

It is basic protection against vandalism and a thrown object, such as a stone. The film also protects people from shards.

A determined burglar with a tool is only slowed down by P1A. If you protect goods or valuables, choose P2A.

  • windows and doors at risk from thrown objects or vandalism
  • schools, public offices, waiting rooms and public buildings
  • shop windows with lower-value goods
  • glass where you want personal safety and basic resistance in one film

Which films reach class P1A

These films in our range reach P1A. For each we state the test glass or the source of the figure.

  • 3M Scotchshield Ultra S800 – 200 µm in 56 micro-layers. EN 356 P1A on 4 and 6 mm glass (TÜV Rheinland, 2021). Also EN 12600 1B1.
  • 3M Scotchshield Ultra Prestige S70 – safety and solar film in one. EN 356 P1A on 5 mm toughened glass.
  • Solar Screen Safety Clear 8 C – 240 µm, fitted inside. EN 356 P1A and EN 12600 1B1 according to the maker’s data sheet.
  • Solar Screen Safety Clear 8 XC – 240 µm, fitted outside. EN 356 P1A and EN 12600 1B1 according to the maker’s data sheet.

Detailed figures are below. The whole range is on the security window film page.

The class covers film and glass together

A film has no class on its own. The class belongs to the build-up: a specific film on a specific glass.

The same film can have a different class on different glass. 3M Scotchshield Ultra S800 reaches P1A on 4 and 6 mm glass. On 5 mm toughened glass it reaches P2A.

So our quote always states which glass the class applies to. If your glass is different, we tell you in advance.

P1A or P2A?

The difference is the drop height. For P1A the ball falls from 1.5 m, for P2A from 3 m. The impact energy is double.

P1A is enough against vandals and for protecting people. We recommend P2A for ground floors, patio doors and shop windows. Also where an insurer asks for burglary resistance.

More on the EN 356 P2A page.

Hand holding a sample aluminium window profile with insulated glazing

Fitting: film under the glazing bead

The test grades glass clamped in a test frame. In a real window it also matters whether the broken pane stays in the frame.

So on PVC and aluminium windows we run the film under the glazing bead. The edge of the film stays gripped in the frame. More on the safety film under the glazing bead page.

What P1A film costs

Anti-burglary film (P1A to P2A) costs €35 to €65 per m² incl. VAT. Application from inside costs €35 per m², and 20 % more for these thick films.

Together that is €77 to €107 per m² incl. VAT for areas from 6 to 30 m². Travel within Bratislava is a flat €30. You see the price for your windows in the quote form.

Paperwork for your insurer

Does your insurer or a tender ask for EN 356 class P1A? Send us the exact wording. With the job we supply:

  • the name and data sheet of the film used
  • the maker’s evidence of the EN 356 test, with the glass stated
  • a fitting certificate with the scope, date and place

Check in advance whether your insurer accepts film on glass. More on the security film and insurance page.

Films with class EN 356 P1A

Figures according to the makers. The class applies to the film on the glass it was tested on.

3M · safety, interior

Scotchshield Ultra S800

Thinner than S140, but it has 56 micro-layers. So it is very hard to tear, and a split does not spread. It combines the top class for protecting people (1B1) with resistance to thrown objects. On PVC and aluminium windows we fit it under the glazing bead. The broken pane then stays in the frame.

Thickness
200 µm (56 micro-layers)
Light transmission
87%
UV rejection
99.9%
EN 12600
1B1 (4 mm glass)
EN 356
P1A (4 and 6 mm glass), P2A (5 mm tempered)

Best for: shop windows, banks, public offices, schools and public buildings.

EN 12600 1B1 and EN 356 P1A (TÜV Rheinland, 2021), EN 356 P2A on 5 mm tempered glass (3M). ANSI Z97.1 Class A. Warranty 15 years.

Solar Screen · safety, interior

Safety Clear 8 C

A clear film with mid-level protection. It has the top class for people and basic resistance to a thrown object. P1A means a 4.11 kg ball dropped three times from 1.5 m did not break through. It helps against a random stone or a vandal. A determined burglar with a tool is only delayed.

Thickness
240 µm
Light transmission
83% (3 mm glass), 75% (Low-E double glazing)
UV rejection
95–99%
EN 12600
1B1
EN 356
P1A

Best for: family houses, ground-floor flats, schools and surgeries.

EN 12600 1B1, EN 356 P1A (Solar Screen data sheet). Warranty 10 years.

Solar Screen · safety, exterior

Safety Clear 8 XC

The exterior version of 8 C. On double glazing it also slightly reduces overheating. The g-value (how much solar energy gets in) drops from 0.65 to 0.57. Protection: 1B1 for people and basic P1A against a thrown object.

Thickness
240 µm
Light transmission
83% (3 mm glass), 75% (Low-E double glazing)
UV rejection
99%
EN 12600
1B1
EN 356
P1A
g-value
0.82 (double glazing 0.57)

Best for: double glazing and façades where the safety film must go on the outside.

EN 12600 1B1, EN 356 P1A (Solar Screen data sheet). Warranty 5 years.

Data from 3M and Solar Screen (data sheets and test reports). We state the exact film and glass in our quote.

EN 356 classes tested with the ball

ClassDrop heightNumber of impactsEnergy of one impact
P1A1.5 m3about 60 J
P2A3 m3about 120 J
P3A6 m3about 240 J
P4A9 m3about 360 J
P5A9 m9 (3 × 3)about 360 J

The ball always weighs 4.11 kg and is 100 mm in diameter. We worked out the energy from the mass of the ball and the drop height. Classes P6B to P8B are tested with a hammer and an axe.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Updated: November 2026

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
What is EN 356 P1A?

The first class of glass resistance to manual attack under EN 356. The glass took three impacts of a 4.11 kg steel ball from 1.5 m. The ball did not pass through.

Does an ordinary window have class P1A?

Ordinary window glass usually does not. Laminated security glass has it, and so does glass with a security film tested on that glass.

Which film reaches class P1A?

3M Scotchshield Ultra S800 on 4 and 6 mm glass. 3M Scotchshield Ultra Prestige S70 on 5 mm toughened glass. And Solar Screen Safety Clear 8 C and 8 XC.

What is the difference between P1A and P2A?

The drop height of the ball. For P1A it is 1.5 m, for P2A 3 m. So P2A means double the impact energy. More on the EN 356 P2A page.

Is P1A enough against burglary?

It slows a burglar down, but it is the basic class. It is enough against vandals and for protecting people. For ground floors and shop windows we recommend P2A. Also where an insurer asks for it.

Does glass with class P1A break?

Yes, the glass cracks. But the pieces stay on the film and no opening forms. That is what the test checks.

Does class P1A apply on any glass?

No. It applies to the glass the maker tested the film on. Our quote states which glass that is.

What is the difference between EN 356 and EN 12600?

EN 12600 grades how glass protects people who hit it. EN 356 grades how glass resists an attack. Several films have both classes, for example 1B1 and P1A.

Can P1A film go on existing windows?

Yes. We fit it to the glass you already have, usually from inside. The window stays. On PVC and aluminium windows we run it under the glazing bead.

Is P1A film visible on the glass?

Barely. Clear films with class P1A let through 83 to 87 % of light.

How much does P1A film cost?

As a guide, €77 to €107 per m² incl. VAT including fitting, for areas from 6 to 30 m². We state the exact price in the quote.

Do you supply proof of class P1A?

Yes. We supply the film data sheet, the maker’s evidence of the EN 356 test and a fitting certificate.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search