3Mfolie.skWindow & car films
Shopping centre atrium with a glass roof over several floors

All of Slovakia

Window films for shopping centres and retail

Glazed atriums and skylights turn a mall into a greenhouse in summer. Shop windows fade and the ground floor attracts vandals. We have fitted film in large shopping centres in Slovakia. We worked from platforms, in sections and outside opening hours.

  • Atriums and skylights from platforms
  • Work in sections and before opening
  • Experience in large shopping centres

In short

In shopping centres we fit four kinds of film. Solar control films go on atriums, skylights and glass roofs. UV and solar films stop goods in shop windows fading. Safety and anti-graffiti films protect the ground floor. We also put advertising on glass. We work from platforms, in sections and outside opening hours. Our projects include Aupark in Bratislava, Žilina and Košice, Eurovea and Polus City Center.

Materials we install

What window film does for you

  • Less heat in the room

    Depending on film and glass, it stops 36 to 85 % of solar energy. Homes and offices stay cooler in summer.

  • Less glare

    You can see your screen and TV even in the sun. No need to keep the blinds down all day.

  • UV protection

    The film stops up to 99 % of UV radiation. Floors, furniture and shop-window goods fade much more slowly.

  • No new windows needed

    We apply film to your existing glass. A flat or house usually takes one day, with no dust or building work.

How much will you save on air conditioning? Enter your glass area and film. The calculator shows how much heat the film stops and what you save.
Atrium with a glass roof

Atriums, skylights and glass roofs

Roof glass takes the sun head-on, all day. Under a skylight the mall gets hot in summer. The ventilation runs flat out and shoppers go elsewhere.

Solar control film stops part of the heat at the glass. It also cuts glare. The mall keeps its daylight.

Roof glass is almost always laminated (two panes bonded with a layer) or toughened. It is often large. Laminated glass tolerates a smaller temperature gap between the centre and edge of the pane, about 30–35 °C. Toughened glass tolerates 150 °C or more.

So we assess the risk of thermal stress (cracking from uneven heating) for every skylight. Film on the outside is often right. It stops the heat before it reaches the glass.

  • Atriums and malls with a glass roof.
  • Skylights above food courts and entrances.
  • Glazed façades and entrance halls.
  • Polycarbonate canopies and awnings.

Shop windows: UV, heat and fading

Goods in a shop window fade because of UV. Light and heat also play a part.

3M Prestige solar films block 99.9 % of UV and also stop part of the heat. They greatly cut the risk of clothes, shoes, books or packaging fading. But no film can remove it completely.

Non-metallic films look like clear glass. The window doesn’t look mirrored and the goods are easy to see. More on the Shopfronts and signage page.

Smashed shop window with shards of glass

Security and vandalism on the ground floor

Safety films hold broken glass together. A thief can’t quickly smash the window and grab the goods.

For windows with expensive goods we use, for example, 3M Ultra S800. It meets EN 356 P1A on 4 and 6 mm glass and P2A on 5 mm toughened glass. EN 356 is a standard for how well glass resists being broken through. The three-ply 3M S140 is stronger (EN 356 P2A).

For atrium balustrades and glass corridor walls, 3M S40 or S70 is enough. They meet EN 12600 2B2 (broken glass won’t injure on impact). They protect visitors.

We fit safety film for shop windows in centres outside opening hours. On aluminium frames we take it under the glazing bead so a broken pane stays in the frame. More on safety film under the glazing bead and shop window graphics.

Anti-graffiti films protect shop windows, lifts and balustrades from scratches, etching and spray paint. We replace the damaged film and the glass stays untouched.

Advertising, wayfinding and glass marking

We also fit advertising and wayfinding on glass. We do printed campaigns and cut lettering. Also perforated films you can see out through, and frosted films with a logo. Plus contrasting markings on glass walls.

We use ORAFOL, Avery Dennison and 3M materials. They come off cleanly after a campaign.

  • Seasonal campaigns on shop windows and entrances.
  • Graphics on glass lifts and balustrades.
  • Frosted films for back-of-house areas, management offices and office spaces.
  • Markings on glass doors and walls so visitors don’t walk into them.
Yellow articulated boom lift next to a building wall

Platform work outside opening hours

For work at height we use aerial platforms. We plan the work sections with the centre manager.

We fit film early before opening or after closing. We work at night only when there is no other way, and for a surcharge. We fence off the area under the platform. We tell tenants in advance.

  • Schedule in sections around operations and tenants.
  • Safety planning and fenced-off work areas.
  • Assessment of every glass type, including roof glazing.
  • Handover with data sheets, warranty terms and documents for the management.

Experience in large shopping centres

In 25 years we have also fitted film on large, demanding buildings in Slovakia. In open shopping centres we worked in sections and from platforms.

We also worked inside the Jaslovské Bohunice and Mochovce nuclear power plants. There we had security clearance and the strictest health and safety rules.

Our shopping centres include Aupark in Bratislava, Žilina and Košice, Eurovea, Polus City Center and Galéria Prievidza. You will find more projects in our references.

The same goes for smaller shops, showrooms and premises. The site visit is free and we propose one specific film. We plan the fitting so you don’t have to close.

Which film goes where

LocationProblemSolution
Atrium, skylight, glass roofHeat, glareExterior 3M Prestige or reflective film, depending on the glass.
Polycarbonate canopyHeat, glareFilms for plastics, e.g. Avery Dennison SkyLite.
Shop windowsFading goods, heatNon-metallic 3M Prestige (99.9 % UV).
Ground floor, windows with valuable goodsBreak-ins, vandalism3M Ultra S800, S140
Lifts, balustrades, entrancesGraffiti, scratchesAnti-graffiti film
Shop windows and entrancesAdvertising, campaignsShop window graphics by ORAFOL, Avery Dennison, 3M.

We always check whether a film suits your glass (laminated, toughened, insulating) at the site visit. Values from 3M manufacturer data (EN 410 / NFRC).

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for window film

Do not clean the film for the first 30 days. A light haze and small water bubbles are normal. They disappear on their own as the film dries. In winter this takes longer.

Do

  • Plenty of water with a drop of mild detergent (no ammonia)
  • Soft microfibre cloth
  • Rubber squeegee for the remaining water
  • Clean exterior film just as gently as interior film

Don’t

  • Razor blades, scrapers and rough sponges
  • Cleaners with ammonia or grit
  • Stickers, tape and suction cups on the film
  • A pressure washer close to the edges of exterior film

Tip from practice: When you clean the frames, take care of the film edges. Do not lift them with a fingernail or cloth.

Full film care guide

Where we have worked

We have worked inside the Jaslovské Bohunice and Mochovce nuclear power plants. That meant security clearance and the strictest health and safety rules. We fitted film in open shopping centres in sections and from platforms. In Comenius University buildings we worked while teaching went on.

  • Aupark
    Shopping centre
  • Eurovea, Bratislava
    Shopping centre
  • Slovenské elektrárne, Jaslovské Bohunice and Mochovce nuclear power plants
    Energy
  • Slovnaft, Bratislava
    Refinery
  • Autopolis, Bratislava
    Car dealer
  • Bratislava
    University
  • Bratislava
    Shopping centre
  • Prievidza
    Shopping centre

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
Can you work while the shopping centre is open?

Yes, in sections with a fenced-off work area. But we prefer to do atriums and skylights above the mall before opening or after closing. We work at night only when there is no other way, and for a surcharge. Then nobody walks under the platform.

Can film be applied to an atrium glass roof?

Yes. We check the glass type, pane size and pitch. Then we choose inside or outside film, so there is no risk of thermal stress.

Will film protect goods in a shop window from fading?

It greatly cuts the risk. 3M Prestige films block 99.9 % of UV and also stop part of the heat. But light also causes fading. So we don’t promise complete protection.

Will the mall keep enough daylight?

Yes, if we choose the right film. Non-metallic 3M Prestige films let in plenty of light and stop much of the heat. We test samples on the glass.

Do you provide the platforms?

Yes. We provide the platforms and their operators as part of the job. All our installers are certified for work at height and for operating aerial work platforms and walkways. We also handle safety.

Which film protects a shop window against break-ins?

Safety films for shop windows certified to EN 356, such as 3M Ultra S800 or 3M S140. The choice depends on the glass and the level of protection you need.

Do you also do shop window advertising?

Yes. We do printed and cut graphics, perforated films and frosted films with a logo. We use ORAFOL, Avery Dennison and 3M materials.

How are films on shop windows maintained?

With a neutral cleaner (pH 6–8) without ammonia or abrasives. Use a soft cloth or squeegee. Don’t wash the film for the first 30 days after fitting.

Will you prepare documents for the centre manager or owner?

Yes. We supply data sheets and film values for the specific glass. We add a schedule, safety measures and references.

How quickly will we get a quote?

Send photos, sizes and the glass type to m2s@m2s.sk or via the form. We will reply as soon as possible. We will arrange a free site visit.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search