3Mfolie.skWindow & car films
Modern family house with large windows at dusk

All of Slovakia

Window films for family homes

An overheated attic? Cold air by the windows in winter? Neighbours who can see into your living room? We have a film for each of these problems. One film often solves two at once.

  • No building work or window replacement
  • Clean work in an occupied home
  • Free site visit

In short

For family homes we most often recommend three types of film. Solar control films keep the attic and south-facing rooms cool in summer. Mirror or frosted films give privacy. Safety films protect the ground floor and patio doors. We choose the film by window orientation and glass type. The site visit is free. Live in a flat? See window film for flats.

Materials we install

What window film does for you

  • Less heat in the room

    Depending on film and glass, it stops 36 to 85 % of solar energy. Homes and offices stay cooler in summer.

  • Less glare

    You can see your screen and TV even in the sun. No need to keep the blinds down all day.

  • UV protection

    The film stops up to 99 % of UV radiation. Floors, furniture and shop-window goods fade much more slowly.

  • No new windows needed

    We apply film to your existing glass. A flat or house usually takes one day, with no dust or building work.

How much will you save on air conditioning? Enter your glass area and film. The calculator shows how much heat the film stops and what you save.
Empty room with sun shining through the windows onto a wooden floor

Common problems and solutions

Different windows in a house often need different films. A south-facing attic needs something other than a north-facing kitchen. Patio doors need something other than a bathroom window. So we name the problem first and only then choose the film.

How window film works

Film changes what the glass lets in. Think of it as sunglasses for your window.

Sunlight has three parts. About 3 % is UV and 44 % is visible light. The other 53 % is infrared, which you feel as heat. A good solar control film stops much of the heat and almost all UV. It still lets in as much light as possible.

The key figures are on the data sheet. VLT tells you how much light gets through. TSER tells you how much solar energy the film stops. The g-value tells you how much energy reaches the room.

An example: 3M Prestige 70 Exterior on standard double glazing stops 61 % of solar energy. It lets through 63 % of light. These are the manufacturer’s figures. The room is noticeably cooler, but not dark.

Safety film does nothing about heat. It is thicker and holds broken glass together.

Attics, roof windows and large glass

The attic with roof windows overheats the most. So do rooms with large south- and west-facing windows. The sun hits a roof window more steeply and for longer than a vertical one. That is where film has the biggest effect.

Modern homes have double or triple glazing, often with large sliding patio doors. Here we check the risk of thermal stress. The centre of the pane heats up while the edges in the frame stay cold. The glass can then crack.

The risk is higher with large panes, triple glazing and dark films. It also rises when a blind or heavy curtain sits right behind the glass. So for large panes and triple glazing we often fit film on the outside. It stops the heat before it reaches the glass. More in the guide film on double and triple glazing.

Single-storey house with glazed doors to the terrace

Privacy and ground-floor security

Burglars most often get in through ground-floor windows and patio doors. Safety film holds broken glass together. This makes forced entry much harder.

For ordinary windows 3M S40 or S70 is enough. They meet EN 12600 2B2 (broken glass won’t injure on impact). For higher protection there is 3M Ultra S800 or the three-ply 3M S140. It meets EN 356 P2A (a standard for resistance to breaking through glass).

We fit safety film for family homes mainly on patio doors and ground-floor windows. On uPVC and aluminium windows we take it under the glazing bead. Broken glass then stays in the frame. More on safety film under the glazing bead.

Do views from the street bother you? Mirror film gives privacy by day. Frosted film works day and night. Safety film can be combined with solar control. 3M Ultra Prestige S70, for example, does both in one layer.

How the site visit works

The site visit is free and usually quicker than you expect. We go through the house window by window. We note the orientation, glass size, glazing type and what is behind the glass. For example blinds, curtains or a radiator.

We identify the glass without taking anything apart. We read the marking on the spacer bar (the strip between the panes). Then we use a flame or torch to count the reflections. This reveals a metallic Low-E coating.

We hold film samples against your window. You see the colour and brightness for real, not on a screen. The quote names one specific film for each group of windows. We add its data-sheet values.

Measuring a window frame with a folding rule

Fitting step by step

  • Protecting the surroundings. We cover sills and the floor with absorbent cloth. Water from the fitting never reaches wood or carpet.
  • Cleaning the glass. We wash the glass and go over it with a scraper. It removes paint, silicone and dirt you can’t see. Every grain under the film would show.
  • Wet application. We wet the film and glass with mounting solution. We position and align the film. Then we squeegee the water out from the centre to the edges.
  • Trimming. We trim the edges with a small gap from the frame and seals. The film won’t lift when you open or clean the window.
  • Checking and handover. We check every window against the light and wipe the frames. We explain how to look after the film.

Most homes are done in one working day. Larger areas or roof windows take two. There is no dust and no building work. The windows stay in place and you can stay at home.

Curing, care and lifespan

For the first few days you may see a slight haze or small bubbles under the film. This is water from the fitting. It slowly evaporates through the film. With standard films this takes about 30 days. With thick safety films and in winter it takes longer.

Don’t press the bubbles. Don’t clean the film for the first 30 days.

After that, clean it like glass. Use a soft cloth or rubber squeegee and a cleaner with a pH of 6–8 (mild and neutral). No ammonia and no abrasives. Never use a razor blade or the rough side of a sponge.

Interior films typically last 10 to 15 years or more. Exterior 3M Prestige lasts 10 to 15 years. The manufacturer’s warranty depends on the film and the glass. We state the exact terms in the quote.

What the price depends on

  • Film type. Standard solar or mirror film costs less. Non-metallic 3M Prestige, low-E or thick safety film costs more.
  • Area. With only a few windows, travel and set-up weigh more in the price per m². So it pays to do several windows at once.
  • Many small panes. Windows with glazing bars mean more cutting.
  • Outside fitting. On triple glazing and roof windows it is slower and the film costs more.
  • Access. Tall windows over a staircase or in a gable may need scaffolding.
  • Other items: removal of old film and the distance from Bratislava.

The online form shows a guide price straight away. More under Pricing.

Myths, and when film won’t help

  • “The darker the film, the cooler the room.” Not necessarily. A spectrally selective film (lets light in, keeps heat out) lets in plenty of light. It stops as much heat as a dark film. A dark film would steal your daylight in winter.
  • “Mirror film gives privacy all the time.” Only by day, when it is brighter outside. In the evening, with the lights on, it works the other way round. At night you need a curtain or frosted film.
  • “Film replaces air conditioning.” No. It cuts the heat from the sun. But it won’t cool a room that also heats up through the roof and walls.
  • “Film replaces new windows.” No. Film does not stop heat loss in winter. Draughty frames need new seals; old glass needs replacing.

We don’t recommend film on glass with damaged edges or a crack. Nor on a misted double-glazed unit with a failed seal. It also makes no sense where you have external blinds that you actually use. Then we would rather tell you it isn’t worth it.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for window film

Do not clean the film for the first 30 days. A light haze and small water bubbles are normal. They disappear on their own as the film dries. In winter this takes longer.

Do

  • Plenty of water with a drop of mild detergent (no ammonia)
  • Soft microfibre cloth
  • Rubber squeegee for the remaining water
  • Clean exterior film just as gently as interior film

Don’t

  • Razor blades, scrapers and rough sponges
  • Cleaners with ammonia or grit
  • Stickers, tape and suction cups on the film
  • A pressure washer close to the edges of exterior film

Tip from practice: When you clean the frames, take care of the film edges. Do not lift them with a fingernail or cloth.

Full film care guide

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
How much does window film for a family home cost?

It depends on the film type, window area, glass type and access. Example: 18 m² of 3M Prestige Exterior comes to about €2,452 incl. VAT, including travel to Pezinok. More examples are in how much window film costs. The online form shows a guide estimate straight away. We prepare an exact quote from photos or after a site visit. The site visit is free.

Which film is best for an attic?

A solar control film that stops a lot of heat, such as 3M Prestige. We fit it on roof and south-facing windows. On roof windows we check the glass and access. We often choose film on the outside.

Will film help against the cold with old windows?

No, our films do not stop heat loss in winter. Draughty frames need new seals, old glass needs replacing. We fit films against summer heat, prying eyes and broken glass.

Can film go on uPVC windows with double or triple glazing?

Yes. We choose a film suitable for insulating glass, so there is no risk of thermal stress. For triple glazing and large panes we often fit film on the outside. It stops the heat before it reaches the glass.

Will film protect my house against burglary?

Safety film for family homes makes entry through the glass much harder and slower. It holds the shards together. It works best with good hardware, security glazing and an alarm. It doesn’t make the window unbreakable.

Will the film make the rooms dark?

Not necessarily. Non-metallic 3M Prestige films let in plenty of light and look almost like ordinary glass. We show you samples on your window. You decide on the real impression.

How long does film last?

Interior films typically 10 to 15 years or more. Exterior 3M Prestige 10 to 15 years. We state the manufacturer’s warranty for your film and glass in the quote.

Why is there haze or bubbles under the film after fitting?

It is water from the wet application. It usually evaporates within 30 days. With thick safety films and in winter it takes longer. Don’t press the bubbles, and get in touch if they don’t go.

Will the film be visible from outside?

It depends on the type. Non-metallic film barely changes the look of the house. Mirror film creates a shiny surface outside. Want a uniform façade? We recommend the same film on all windows on one side.

Do I have to be at home during fitting?

Just let us in and check the work with us at the end. You can stay at home as normal. We work without dust or noise.

Do you also do flats and conservatories?
What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search