3Mfolie.skWindow & car films
Fitter installing a window sash

All of Slovakia

Will window film void my window or double glazing warranty?

Do you have new windows and want film on them? A fair question is: will I lose my warranty? The answer depends on the window maker and on the film you choose. We explain what to check and how we work.

  • We check the glass type before proposing a film
  • Film chosen to manufacturer guidance
  • We show you the film maker warranty document

In short

You might, but not necessarily. Some makers of windows and insulating glass exclude film fitted later from their warranty. Others do not mention it. So before fitting, read the warranty terms of your windows or ask the maker. The right film for the glass type lowers the risk to the glass. On newer double and triple glazing we therefore often choose exterior film. It heats the glass less. We always check the glass type before proposing a film.

Materials we install

What window film does for you

  • Less heat in the room

    Depending on film and glass, it stops 36 to 85 % of solar energy. Homes and offices stay cooler in summer.

  • Less glare

    You can see your screen and TV even in the sun. No need to keep the blinds down all day.

  • UV protection

    The film stops up to 99 % of UV radiation. Floors, furniture and shop-window goods fade much more slowly.

  • No new windows needed

    We apply film to your existing glass. A flat or house usually takes one day, with no dust or building work.

Crack running across a window pane

Why window makers care about film

Film on the glass surface does not directly damage the seal or the gas in double glazing. But it changes how the glass heats up.

Interior film absorbs part of the solar energy. The inner pane then gets hotter in the sun.

With some glass this increases thermal stress. That is tension from uneven heating, which can crack the glass.

Higher temperature can also put more strain on the edge seal (the seal between the panes). So window makers sometimes exclude film fitted later from their warranty.

We explain the causes of cracking in detail on the page film on double glazing and thermal stress.

What to check before fitting

  • Read the window warranty document. Look for any mention of films, graphics or changes to the glass.
  • If it says nothing, ask the window maker. Ideally by e-mail, so you have the answer in writing.
  • Find out the glass type. Double or triple glazing, Low-E layer (an invisible layer that keeps heat in), toughened or laminated glass.
  • You will find glass details in the window documents. Some are also printed on the spacer bar between the panes.
  • Tell us how many years of window warranty are left. We will propose the safer option accordingly.
Hand holding a sample aluminium window profile with insulated glazing

The right film for the right glass

Not every film suits every glass. A dark or mirror film inside heats the glass more than a light one.

Film makers such as 3M publish guidance on which film suits which glass. They look at type, thickness and pane size. Also at any Low-E layer and shading.

We check the glass type before we propose a film. For at-risk glass we choose a lighter film or an exterior film.

Exterior film stops heat before the glass. So it heats insulating glass less. More in the comparison interior vs. exterior film.

The film maker warranty

Film makers give their own warranty on the film. It covers film defects, for example peeling, bubbling or colour change.

Some film maker warranties also relate to the glass. But they only apply under exact conditions. These vary by film and by country.

We will not promise you anything blindly. We show you the conditions in the maker warranty document before you order.

A film warranty does not replace a window warranty. They are two separate warranties from two different makers.

When the window maker does not allow film

  • Exterior film – heats insulating glass less. Ask the window maker whether they accept it.
  • Lighter film – absorbs less heat. Often enough when you need less shading.
  • Wait until the warranty ends – sensible for windows close to the end of their warranty.
  • External shading – outside blinds or an awning. Sometimes that is a better answer than film. We will tell you honestly.

Send photos of your windows and the warranty terms to m2s@m2s.sk. Or fill in the quote form. We assess the glass during a free site visit.

What to consider with windows under warranty

SituationWhat we recommend
Windows under warranty, terms say nothing about filmAsk the window maker in writing.
Window maker excludes filmExterior film by agreement with the maker. Or other shading.
New triple glazing or Low-E glassUsually exterior film, after assessing the glass.
Large panes or partial shadeLighter or exterior film.
Older windows without warrantyFilm chosen by glass type and window orientation.

The window maker sets the terms of the window warranty. The film maker sets the terms of the film warranty. We will help you read both before fitting.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for window film

Do not clean the film for the first 30 days. A light haze and small water bubbles are normal. They disappear on their own as the film dries. In winter this takes longer.

Do

  • Plenty of water with a drop of mild detergent (no ammonia)
  • Soft microfibre cloth
  • Rubber squeegee for the remaining water
  • Clean exterior film just as gently as interior film

Don’t

  • Razor blades, scrapers and rough sponges
  • Cleaners with ammonia or grit
  • Stickers, tape and suction cups on the film
  • A pressure washer close to the edges of exterior film

Tip from practice: When you clean the frames, take care of the film edges. Do not lift them with a fingernail or cloth.

Full film care guide

Updated: November 2026

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
Will I lose my window warranty if I fit film?

You might. It depends on the terms of the window maker. Some exclude film fitted later, others do not. Check in writing before fitting.

Where do I find out whether the window maker allows film?

In the warranty document or warranty terms of your windows. If they say nothing about film, write to the maker. A written answer helps you with any later claim.

Will film damage the double glazing seal?

Not directly, the film is only on the glass surface. But interior film heats the glass more. This can put more strain on the edge of the unit. So for sensitive glass we choose exterior film.

Will gas escape from double glazing after film is fitted?

No. The film sits on the glass surface. It does not touch the gas between the panes.

Can film go on new triple glazing?

Yes, but with care. For triple glazing we most often recommend exterior film. Interior film is only an option after a thorough glass assessment.

How do you find out what glass I have?

We check the window documents and assess the glass on site. We look at the number of panes, thickness, size and any Low-E layer. Shading and window orientation matter too.

Does the film maker also give a warranty on the glass?

Some film makers have a warranty that relates to the glass. But it only applies under exact conditions and not in every country. We show you the conditions in the maker warranty document.

What warranty applies to the film itself?

It depends on the film type and on whether it is inside or outside. We state the warranty in the quote. We show you the conditions in the maker warranty document.

Is exterior film safer for my window warranty?

For the glass, yes, because it heats it less. Whether the window maker accepts it is their decision. Ask them in advance.

What if the glass cracks after film is fitted?

First the cause must be found. A thermal crack looks different from a crack after an impact. We explain the differences on the page thermal stress in glass.

Do you ever advise against fitting film?

Yes. If the window maker excludes film and the warranty matters to you, we will tell you. We will suggest another solution or wait until the warranty ends.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search