3Mfolie.skWindow & car films
House in winter with frost-covered trees

All of Slovakia

3M Prestige in summer and winter

The film stays on the glass all year. In summer you want less sun, in winter you could use more. How does Prestige cope? In summer it works at full strength. In winter it takes some of the sun’s heat. When that matters and when it does not is explained below.

  • Summer: more effect than the data sheet says
  • Winter: takes some sun, no change to U-value
  • When to fit no film

In short

In summer Prestige stops even more on a south window than the data sheet says. Summer sun strikes at a steep angle, and more of it is reflected. In winter the film also takes some of the sun’s heat. It responds to wavelengths, not seasons. But it hardly changes heat loss through the window (the U-value). For air-conditioned offices and overheating flats the year comes out favourable or neutral. A well-insulated house with south windows designed for winter sun is the exception. There we leave the film off or choose the lightest, Prestige 90 Exterior.

Materials we install

What 3M Prestige does for you

  • Looks like ordinary glass

    Prestige hardly reflects (5–9 %). No mirror look outside, so the building looks the same.

  • Strong heat protection

    On double glazing it stops up to 76 % of solar energy, depending on the grade. It lets in more light than you would expect.

  • Does not block signal

    The film is metal-free. Mobile, 5G, Wi-Fi and GPS keep working normally.

  • 99.9 % UV protection

    It protects people and interiors from UV. Furniture and floors keep their colour longer.

How much will you save on air conditioning? Enter your glass area and film. The calculator shows how much heat the film stops and what you save.

The film does not know the seasons

Prestige filters wavelengths, not seasons. It lets visible light through and reflects much of the infrared heat. Winter sun has the same spectrum as summer sun, there is just less of it.

So the film stops a similar share of energy in summer and winter. The g-value shows how much solar energy gets into the room. With Prestige 70 Exterior it falls from 0.70 to 0.39 on double glazing.

You may have heard that selective film “lets heat in during winter but not in summer”. That is a simplification. The difference between summer and winter comes from the sun’s angle, not the film.

Summer: the film works at full strength

In summer the film stops more on a south window than the data sheet says. At midday the summer sun in Bratislava climbs to about 65° above the horizon. So it strikes a vertical window at a steep angle.

At a steep angle more energy bounces off the glass and film. TSER shows this (how much solar energy glass and film stop). According to 3M (NFRC), Prestige 70 Exterior has TSER of 52 % head-on. At a 60° angle it is 61 %.

What this means for you in summer:

  • less overheating in the attic and in rooms without air conditioning
  • less glare on your screen
  • less work for the air conditioning
  • 99.9 % UV protection – floors and furniture fade less
Lit house windows on a winter evening

Winter: the sun shines almost head-on

In winter the film works exactly as the data sheet says. Around 21 December the midday sun in Bratislava rises only about 18° above the horizon. So it shines on a south window almost head-on.

Head-on, the rated values apply. The film takes winter sun in the proportion the g-value gives. Not less.

How much useful winter heat you lose

Usually less than you might think. Winter sun is weak: short days, low sun, inversions and cloud.

Solar heat only helps when the room really needs heating. In an office with people, computers and lights, part of the winter sun is more of a burden.

North windows lose almost nothing. East and west lose little. South windows of living rooms are what matter.

The 3M simulation in the environmental declaration for Prestige 70 Exterior counts this. In a model office in Prague, winter gas use goes up. But the saving on cooling is bigger. The net primary-energy saving is 10.7 kWh/m² of window on single glazing and 14.8 on double glazing over 10 years.

This does not apply to buildings without cooling. There the film slightly increases heating in winter. The benefit is summer comfort.

A worked example including the winter loss is on the energy savings page.

Heat loss through the window stays

In winter a room loses heat mainly through the glass, not from a lack of sun. The U-value describes this loss (how much heat escapes through the window).

Exterior versions do not change it. Single glazing stays at 5.8 W/m²K. Prestige 70 Interior has an emissivity of 0.78 (how a surface gives off heat). According to 3M it lowers the U-value by only about 7 %. So Prestige does not “hold” heat in winter. But it does not let it out faster either.

Do cold windows or condensation bother you? Film will not fix that. New seals, secondary glazing or new glass will.

Bedroom with floor-to-ceiling windows overlooking a lake

When Prestige, when low-E, when nothing

It is best to decide façade by façade, not for the whole house at once:

  • West and south-west, attics, glazed offices – Prestige. Summer overheating outweighs winter gains here.
  • South living room in an insulated house with a roof overhang – often no film. Or Prestige 90 Exterior: it lowers the g-value of double glazing only from 0.70 to 0.56 and blocks UV.
  • North windows – no need for Prestige. The sun hardly reaches them.
  • Passive and low-energy houses – the glazing was designed for an exact solar gain. Talk to the designer before fitting any film.

Winter fitting and glass safety

In winter the sun can shine on cold glass while the edges in the frame stay cold. The temperature difference creates strain in the glass (thermal stress). An absorbing film increases it.

Exterior versions carry a lower risk on sealed units than Interior. But we always assess pane size, glass type and shading at the site visit, using the 3M method.

We fit Exterior films when glass and air are at least 8 °C. So we plan larger winter jobs around the weather.

Summer and winter in figures

The first chart shows the effect of the sun’s angle in summer and winter. The second shows how much solar energy gets through double glazing with different films. That is the share you keep in winter too. The third shows heat loss through the window (U-value).

Head-on winter sun versus steep summer sun TSER of Prestige Exterior on single glazing, 3M data (NFRC).
  • Head-on – winter sun on a south window
  • 60° angle – summer midday
Prestige 90 Exterior
36 % – Head-on – winter sun on a south window
49 % – 60° angle – summer midday
Prestige 70 Exterior
52 % – Head-on – winter sun on a south window
61 % – 60° angle – summer midday
Prestige 40 Exterior
61 % – Head-on – winter sun on a south window
67 % – 60° angle – summer midday
Prestige 20 Exterior
66 % – Head-on – winter sun on a south window
72 % – 60° angle – summer midday

With steep summer sun the film stops more than the data sheet says. In winter it works to its rated values.

Show as a table
MetricHead-on – winter sun on a south window60° angle – summer midday
Prestige 90 Exterior36 %49 %
Prestige 70 Exterior52 %61 %
Prestige 40 Exterior61 %67 %
Prestige 20 Exterior66 %72 %
How much solar energy gets in g-value × 100, clear double glazing. Applies in summer and winter.
Double glazing without filmg = 0.70
70 % – Solar energy let through
Prestige 70 Interiorg = 0.58
58 % – Solar energy let through
Prestige 90 Exteriorg = 0.56
56 % – Solar energy let through
Prestige 70 Exteriorg = 0.39
39 % – Solar energy let through
Prestige 40 Exteriorg = 0.29
29 % – Solar energy let through
Prestige 20 Exteriorg = 0.24
24 % – Solar energy let through

3M data to EN 410. Want to keep as much winter sun as possible? Choose a lighter type.

Show as a table
MetricSolar energy let through
Double glazing without film70 %
Prestige 70 Interior58 %
Prestige 90 Exterior56 %
Prestige 70 Exterior39 %
Prestige 40 Exterior29 %
Prestige 20 Exterior24 %
Heat loss through the window (U-value) W/m²K, lower = better. Indicative values.
Single glazing
5.8 W/m²K – U-value
+ Prestige Exteriorno change
5.8 W/m²K – U-value
+ Prestige 70 Interiorabout −7 % according to 3M
5.4 W/m²K – U-value
Older double glazing without Low-E
2.7 W/m²K – U-value
New triple glazingUg 0.5–0.6
0.6 W/m²K – U-value

Prestige is not an insulating film. New seals, secondary glazing or new glazing cut heat loss.

Show as a table
MetricU-value
Single glazing5.8 W/m²K
+ Prestige Exterior5.8 W/m²K
+ Prestige 70 Interior5.4 W/m²K
Older double glazing without Low-E2.7 W/m²K
New triple glazing0.6 W/m²K

What the values mean

Solar gain
Heat from the sun that gets through the window into the room. In winter it helps heating, in summer it overheats.
U-value
How much heat escapes through the window, in W/m²K. It decides heat loss in winter.
Emissivity
How a surface gives off heat. Low-E glass has it low. So they send heat back into the room.
Angle of incidence
The angle between a sun ray and a line square to the glass. The larger it is, the more energy bounces off.

Source: 3M Prestige product sheets (EN 410) and 3M Prestige Exterior Series (NFRC, TSER at 60°). 3M EPD Prestige 70 Exterior S-P-00992. We calculated sun height for Bratislava (48.1° N).

What to choose for your situation

SituationRecommendationWhy
Air-conditioned office, south or westPrestige 50 or 70 ExteriorCooling savings outweigh the winter loss. Less glare.
Top-floor flat, hot in summerPrestige 70 or 40 ExteriorSummer comfort matters more than small winter gains.
Insulated house, south living room with overhangNo film or Prestige 90 ExteriorThe overhang shades in summer. In winter you want the sun in.
ConservatoryA mix by orientationThe roof overheats, the walls lose heat. More on the conservatories page.
Passive houseTalk to the designerSolar gains are part of the energy design.

We always assess the actual glass, orientation and heating. We give warranty terms for the specific film and glass type in the quote.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for window film

Do not clean the film for the first 30 days. A light haze and small water bubbles are normal. They disappear on their own as the film dries. In winter this takes longer.

Do

  • Plenty of water with a drop of mild detergent (no ammonia)
  • Soft microfibre cloth
  • Rubber squeegee for the remaining water
  • Clean exterior film just as gently as interior film

Don’t

  • Razor blades, scrapers and rough sponges
  • Cleaners with ammonia or grit
  • Stickers, tape and suction cups on the film
  • A pressure washer close to the edges of exterior film

Tip from practice: When you clean the frames, take care of the film edges. Do not lift them with a fingernail or cloth.

Full film care guide

Updated: November 2026

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
How much does Prestige help in summer?

A lot, especially on south and west windows. With Prestige 70 Exterior, 39 % of solar energy gets through double glazing instead of 70 %. With steep summer sun the film stops even more than the data sheet says.

Will Prestige take away my winter sun?

Partly, in line with the g-value. With Prestige 70 Exterior, 39 % of solar energy gets through double glazing instead of 70 %. In air-conditioned buildings and overheating rooms this matters little. For south windows of an insulated house, think it through.

Is it true that selective film lets in more heat in winter?

Only compared with summer. In summer the sun strikes at a steep angle and the film stops more. Prestige 70 Exterior stops 61 % at 60° and 52 % head-on. In winter the sun shines almost head-on and the film works to its data sheet. Compared with no film, it still reduces winter gains.

Will Prestige keep heat in the room?

No. Prestige does not change the U-value – Exterior versions not at all, Prestige 70 Interior by about 7 %. To keep heat in, seals or new glazing help more.

Will I heat more?

Slightly, in a building without cooling and with large south windows. In an air-conditioned office the cooling saving outweighs the winter loss. The 3M simulation for Prague shows a net primary-energy saving.

Which Prestige takes the least winter sun?

Prestige 90 Exterior. On double glazing it lowers the g-value only from 0.70 to 0.56 and blocks 99.9 % of UV. It suits places where UV protection and a little less heat are the main aim.

Should I put film on north windows too?

Not for heat – the sun hardly reaches the north side. Film will not fix cold by north windows.

Can film be fitted in winter?

Interior films yes, in a heated room. We fit Exterior films at 8 °C or above. So in winter we plan them around the weather forecast.

Can film crack the glass in winter?

There is a risk with the wrong mix of film and glass. Especially with a dark Interior film on a large sealed unit in partial shade. That is why we assess the glass at the site visit. On sealed units we normally choose an Exterior version.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search