3Mfolie.skWindow & car films
Glass office facade among trees

All of Slovakia

Ecology and EPD of 3M Prestige film

Building, renovating or certifying? Then you need verified figures about materials, not promises. That is exactly what an EPD is. We explain in plain words what the 3M Prestige EPD gives you and how to use it.

  • Verified by an independent third party
  • Prestige 70 Exterior, 40 Exterior and the Prestige 70 range
  • For BREEAM, LEED, ESG and tenders

In short

An EPD is a verified environmental “birth certificate” for a product. 3M has issued one for Prestige 70 Exterior, Prestige 40 Exterior and the Prestige 70 range. They follow ISO 14025 and EN 15804+A2. An independent third party verified them, and they are listed with EPD International. Making the film has a carbon footprint of about 5.5 to 10.3 kg CO₂e per m² of window. That depends on type and roll width. The EPD also gives a simulated energy saving during use. You can use it for BREEAM and LEED, ESG reporting and public procurement.

Materials we install

What 3M Prestige does for you

  • Looks like ordinary glass

    Prestige hardly reflects (5–9 %). No mirror look outside, so the building looks the same.

  • Strong heat protection

    On double glazing it stops up to 76 % of solar energy, depending on the grade. It lets in more light than you would expect.

  • Does not block signal

    The film is metal-free. Mobile, 5G, Wi-Fi and GPS keep working normally.

  • 99.9 % UV protection

    It protects people and interiors from UV. Furniture and floors keep their colour longer.

What an EPD gives a building owner

An EPD saves you arguing about how “green” something is. It gives verified figures that certification schemes and buyers accept.

  • LEED – products with a verified EPD count towards the Building Product Disclosure and Optimization – Environmental Product Declarations credit. It sits in the Materials and Resources category.
  • BREEAM – EPD data feeds the building life-cycle assessment in the Materials category (Mat 01). Some schemes also assess EPDs separately.
  • ESG and building carbon footprint – reporting (for example under the CSRD) needs verified figures, not estimates. So do embodied-carbon calculations. 3M data is also in LCA tool databases, such as One Click LCA.
  • Public procurement – in green procurement the buyer may ask for proof of environmental properties. A third-party verified EPD is suitable evidence.
  • Renovation – the film’s carbon footprint is in single-digit kg CO₂e per m² of window. It is worth comparing with replacing the glazing. With an EPD you do that on verified figures.

For a project or tender we supply the EPD and data sheets to EN 410. We add a glass check and, after fitting, an application certificate. Write to m2s@m2s.sk with what your documents require.

EPD in plain words

An EPD (Environmental Product Declaration) is a Type III environmental declaration under ISO 14025. It is not an eco-label or a “green product” sticker.

It holds figures from a life-cycle assessment (LCA – a product’s impact from raw material to disposal). For example carbon footprint, energy and water use, and waste.

In Europe, construction products follow EN 15804, now in version A2. It sets how a product’s life splits into stages (modules) and what must be declared. That makes EPDs of different products comparable. They can also be added up into a whole building’s footprint.

An independent verifier checks every EPD before publication. A programme operator then registers it.

Mirrored glass facade reflecting the sky

How much CO₂ the film “costs”

Making Prestige 70 Exterior has a carbon footprint of 6.4 to 10.3 kg CO₂e per m² of window. For Prestige 40 Exterior it is 5.5 to 9.8 kg. Roll width makes the difference.

The EPD counts the film for 1 m² of window, including packaging. With 5 % fitting waste that is 1.05 m² of film. This is the declared unit (the base the figures refer to).

The EPD splits the film’s life into stages:

  • A1–A3 – raw materials, transport to the plant and production
  • A4–A5 – transport to site and fitting
  • B1–B7 – use; not declared, as the film uses no energy or material
  • C1–C4 – end of life
  • D – benefits beyond the system boundary, such as energy from waste

Prestige 70 Exterior has 7.0 to 11.0 kg CO₂e for stages A1 to C4 together. Module D is −0.4 kg CO₂e. The film is made in 3M plants in the USA.

When the carbon pays back

The film reduces the need for cooling. So its real benefit shows only while the building is in use.

The EPD for Prestige 70 Exterior adds a simulation of a model office for 56 cities. Net primary-energy saving over 10 years on double glazing: Prague 14.8 kWh/m² of window, Berlin 22.1, Rome 41.

In its sustainability paper 3M converted these results into emissions. For Rome and Prestige 40 Exterior it gives 7 kg CO₂e/m² for production. The saving over 10 years is 173 kg CO₂e/m². So the carbon pays back in about 0.4 years.

Overall 3M quotes a saving of “up to 205 kWh/m² of window”. With the average EU-28 energy mix that is about 82 kg CO₂.

In central Europe the saving is lower. When the carbon pays back in your building has to be calculated. Orientation, cooling and the energy mix decide.

More on energy savings and a worked example on the energy savings page.

Which Prestige films have an EPD

EPD International lists three 3M declarations for Prestige films:

  • S-P-00992 – 3M Prestige 70 Exterior
  • S-P-00993 – 3M Prestige 40 Exterior
  • S-P-00994 – 3M Prestige 70 (interior range)

The EPD owner is 3M Belgium, and they cover Europe. The rules are PCR 2019:14 for construction products under EN 15804+A2. SGS Italia, accredited by ACCREDIA, verified them.

The current versions are dated 21 March 2023. The registry lists them as valid until 18 October 2026. Before handing them over for a project or tender we check the registry. We ask 3M for the valid version.

Other Prestige types (90, 50, 20 Exterior, 40 Interior) have no separate EPD in the registry.

What to watch when reading an EPD

  • Compare the same declared unit (here 1 m² of window including 5 % waste) and the same modules.
  • Values depend on roll width. Use the roll that will actually be used, or a more cautious value.
  • The in-use saving is additional information from a simulation. It is not part of the declared modules A–D.
  • An EPD has limited validity. Check its status in the EPD International registry before handing it over.

The EPD in figures

The production carbon footprint from the EPD. Compared with the simulated in-use saving from the 3M paper.

Production carbon footprint (A1–A3) kg CO₂e per m² of window (1.05 m² of film with packaging) by roll width.
  • Prestige 70 Exterior
  • Prestige 40 Exterior
Roll 0.91 m
10.29 kg CO₂e – Prestige 70 Exterior
9.78 kg CO₂e – Prestige 40 Exterior
Roll 1.52 m
6.44 kg CO₂e – Prestige 70 Exterior
6.19 kg CO₂e – Prestige 40 Exterior
Roll 1.83 m
7.91 kg CO₂e – Prestige 70 Exterior
5.46 kg CO₂e – Prestige 40 Exterior

Sum of modules A1, A2 and A3 (GWP-total) from EPDs S-P-00992 and S-P-00993.

Show as a table
MetricPrestige 70 ExteriorPrestige 40 Exterior
Roll 0.91 m10.29 kg CO₂e9.78 kg CO₂e
Roll 1.52 m6.44 kg CO₂e6.19 kg CO₂e
Roll 1.83 m7.91 kg CO₂e5.46 kg CO₂e
Carbon footprint versus savings – Rome, 10 years kg CO₂e per m² of film, reference office, double glazing. 3M paper.
  • Film carbon footprint
  • Emissions saved over 10 years
Prestige 70 (interior)
4 kg CO₂e – Film carbon footprint
93 kg CO₂e – Emissions saved over 10 years
Prestige 70 Exterior
8 kg CO₂e – Film carbon footprint
140 kg CO₂e – Emissions saved over 10 years
Prestige 40 Exterior
7 kg CO₂e – Film carbon footprint
173 kg CO₂e – Emissions saved over 10 years

Rome needs far more cooling than Slovakia. 3M gives no emissions for central European cities. According to the EPD the energy saving here is about a third to a half.

Show as a table
MetricFilm carbon footprintEmissions saved over 10 years
Prestige 70 (interior)4 kg CO₂e93 kg CO₂e
Prestige 70 Exterior8 kg CO₂e140 kg CO₂e
Prestige 40 Exterior7 kg CO₂e173 kg CO₂e

What the values mean

EPD
Environmental Product Declaration. A verified Type III environmental declaration under ISO 14025.
EN 15804+A2
The European standard with rules for EPDs of construction products. It splits a product’s life into modules A–D.
PCR
Product Category Rules. Rules for a specific product group. For Prestige, PCR 2019:14 Construction products applies.
GWP
Global warming potential in kg CO₂ equivalent. Put simply: the carbon footprint.
A1–A3
Production: raw materials, transport to the plant and manufacturing.
B1–B7
Use. Not declared for film. The energy saving is only additional information.
Module D
Benefits and loads beyond the system boundary, such as energy from waste.

Source: EPD International registry. 3M EPDs Prestige 70 Exterior (S-P-00992), Prestige 40 Exterior (S-P-00993) and Prestige 70 Series (S-P-00994), versions of 21 March 2023. 3M white paper on the sustainability value of Prestige films (EMEA).

3M Prestige EPDs in the registry

FilmRegistration numberVersionValidity per registryStandard and PCR
3M Prestige 70 ExteriorS-P-0099221 March 2023until 18 October 2026EN 15804+A2, PCR 2019:14
3M Prestige 40 ExteriorS-P-0099321 March 2023until 18 October 2026EN 15804+A2, PCR 2019:14
3M Prestige 70 (interior)S-P-0099421 March 2023until 18 October 2026EN 15804+A2, PCR 2019:14

Status checked in November 2026. Before use in a project or tender we check the current version in the registry. We supply the valid document. We give warranty terms for the specific film and glass type in the quote.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for window film

Do not clean the film for the first 30 days. A light haze and small water bubbles are normal. They disappear on their own as the film dries. In winter this takes longer.

Do

  • Plenty of water with a drop of mild detergent (no ammonia)
  • Soft microfibre cloth
  • Rubber squeegee for the remaining water
  • Clean exterior film just as gently as interior film

Don’t

  • Razor blades, scrapers and rough sponges
  • Cleaners with ammonia or grit
  • Stickers, tape and suction cups on the film
  • A pressure washer close to the edges of exterior film

Tip from practice: When you clean the frames, take care of the film edges. Do not lift them with a fingernail or cloth.

Full film care guide

Updated: November 2026

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
What is an EPD certificate?

It is a Type III environmental product declaration under ISO 14025. A verified document with figures on a product’s environmental impact over its whole life. For construction products it follows EN 15804.

What does an EPD give me as a building owner?

Verified figures for BREEAM, LEED, ESG reporting and public procurement. You do not have to rely on estimates. In a renovation you can compare film with new glazing on verified data.

Which 3M Prestige films have an EPD?

Prestige 70 Exterior (S-P-00992) and Prestige 40 Exterior (S-P-00993). Also the interior Prestige 70 range (S-P-00994). All are listed with EPD International.

What is the carbon footprint of 3M Prestige film?

According to the EPD, making Prestige 70 Exterior produces 6.4 to 10.3 kg CO₂e per m² of window. Prestige 40 Exterior produces 5.5 to 9.8 kg CO₂e. Roll width makes the difference.

What is the film made of?

58–68 % is multilayer PET/PMMA optical film. 3–8 % is acrylic adhesive and 2–6 % a surface coating. The rest (20–26 %) is a siliconised PET liner that is removed during fitting.

Is the EPD still valid?

The EPD International registry lists the 2023 versions as valid until 18 October 2026. Before use in a project we check the current status. We ask 3M for the valid version.

Does film with an EPD help with BREEAM or LEED?

Yes. In LEED, products with a verified EPD count towards the environmental declarations credit. In BREEAM they feed the life-cycle assessment. The points depend on the scheme and on other EPD products in the project.

Does the EPD show energy savings too?

Yes, as additional information from an office simulation for 56 cities. For example 14.8 kWh of primary energy per m² of window over 10 years in Prague on double glazing. The use modules B1–B7 are not declared.

How long until the film’s carbon pays back?

According to the 3M paper for Rome, about 0.4 years for Prestige 40 Exterior. In Slovakia it will take longer. It depends on the building’s orientation, cooling and energy mix.

Can you supply the EPD for public procurement?

Yes. We supply the EPD, data sheets to EN 410 and, after fitting, an application certificate. Write to m2s@m2s.sk with the documents the tender requires.

Do Prestige 90 or 50 Exterior have an EPD?

We found no separate EPD for them in the EPD International registry. If your project needs one, we will check with the manufacturer what documents are available.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search