3Mfolie.skWindow & car films
Hand parting the slats of an interior window blind

All of Slovakia

Window film vs. blinds, shutters and air conditioning

There are several ways to beat summer heat through windows. None is best at everything. External shading stops the most heat. Film works all the time and leaves the facade as it is. Air conditioning does not stop heat; it only removes it. We compare them honestly, even where film does not win.

  • An honest comparison, no embellishment
  • Combinations that make sense
  • Interior film without changing the facade

In short

Closed external shading stops the most heat. This means external blinds, screen blinds (made of dense mesh) and awnings. They catch the sun before it reaches the glass. But they change the facade. In apartment buildings you usually need the owners’ consent and must notify the authority. Solar film works all the time, keeps the view and needs no electricity. On double glazing it rejects 42 to 85 % of solar energy, depending on the type. For example, 3M Prestige 70 interior rejects 42 %, 3M Silver 15 Exterior 85 %. Interior blinds mainly deal with glare. Air conditioning does not stop heat, but film makes its job easier. A combination gives the best results.

Materials we install

What window film does for you

  • Less heat in the room

    Depending on film and glass, it stops 36 to 85 % of solar energy. Homes and offices stay cooler in summer.

  • Less glare

    You can see your screen and TV even in the sun. No need to keep the blinds down all day.

  • UV protection

    The film stops up to 99 % of UV radiation. Floors, furniture and shop-window goods fade much more slowly.

  • No new windows needed

    We apply film to your existing glass. A flat or house usually takes one day, with no dust or building work.

How much will you save on air conditioning? Enter your glass area and film. The calculator shows how much heat the film stops and what you save.
Sun shining through a lowered interior blind

Where the sun is stopped

What matters most is where the solar energy is caught. External shading stops it in front of the window. The heat stays outside.

Exterior film stops it at the outer surface of the glass. Interior film stops it at the inner surface. Part is reflected back out and part is absorbed by the glass.

Interior blinds and curtains catch the sun only inside the room. So the heat they absorb warms the room air.

Air conditioning does not stop the sun at all. It pumps out the heat that has come through the window. You pay for that in electricity. The less heat the window lets in, the less the air conditioning has to work.

Solar window film

  • Pros – works all the time, with no operation or electricity. Keeps the view. 3M Prestige blocks 99.9 % of UV radiation. Interior film does not change the facade and makes no noise in the wind. Installation is quick, with no building work.
  • Cons – stops less heat than closed external shading. It cannot be “switched off”, so in winter it lets in less solar warmth too. On insulating glass, thermal stress must be assessed (the risk of glass cracking from uneven heating).
  • Best for – windows where external shading is not possible or allowed. For example, apartment buildings, listed buildings and glazed facades. Also glazed offices, roof windows and shopfronts.
House facade with exterior roller shutters down

External blinds, shutters and awnings

  • Pros – when closed, they give the best heat protection. In winter you raise them and the sun helps heat the home. Roller shutters also black out the room.
  • Cons – when closed, they restrict the view and light. They need operating or a motor. In strong wind you must raise them. They can rattle and the mechanism needs maintenance. Installation means work on the facade or window reveal (the side wall of the window opening).
  • Permits – external blinds and awnings change the look of the building. In an apartment building you usually need the owners’ consent. External blinds are notified to the building authority. For listed buildings and conservation areas, the heritage office’s opinion may also be needed. Always check with the building authority and the building manager.
  • Awnings mainly protect south-facing windows and terraces, where the sun shines from above. They help less against the low western sun.

Interior blinds and curtains

Interior shading is affordable and easy to use. But it catches the sun only behind the glass, so the heat stays in the room.

It reliably deals with glare and privacy. It helps less against overheating. Light and reflective fabrics help more than dark ones.

With film you can keep using interior blinds. With insulating glass, however, don’t leave them closed tight against the glass all day. Heat builds up between them and the glass. This raises the risk of thermal stress.

Air conditioning

Air conditioning is the only option that holds a room at a set temperature. But it does not stop heat at the source; it only removes it.

It uses electricity and needs regular servicing. In apartment buildings the outdoor unit must follow the building rules.

Film usually won’t replace air conditioning. But it reduces the heat it has to remove. In glazed offices on the sunny side, the air conditioning then runs less. The temperature is also more even.

For mild overheating in a flat or house, film plus night ventilation is sometimes enough. More on office window film.

Replacing the windows

New windows with solar control insulating glass deal with heat gain and heat loss at once. But they cost the most and need building work. They make sense when the windows are at the end of their life.

Are your windows in good condition, and heat is the problem? Film achieves part of the effect without replacement. It does not change heat loss in winter, though.

Bright living room with a window and a sofa

Combinations we recommend

  • Flat in an apartment building – solar film chosen for the glass and the building rules. Add interior roller blinds against glare and night ventilation. More on window film for flats.
  • Family home – external blinds on the sunniest windows. Film on roof windows and large glazing where shading is not possible. More on window films for family homes.
  • Glazed office – exterior film on the facade. Add interior roller blinds against screen glare. The air conditioning then runs with a lower load.
  • Conservatory – a stronger film on the roof, a lighter one on the walls. Plus ventilation under the roof. More on conservatory window film.
  • Historic building – instead of external blinds, a non-metallic film that reflects little. For example, 3M Prestige.

Which film to choose is explained in our guide how to choose window film.

Comparing solutions against heat

SolutionWhere it stops solar energyLight and viewCost levelMaintenancePermits (apartment building, listed)Wind and noise
Solar film – interiorAt the inner surface of the glassView remains; light depends on film.Low to mediumMinimal, gentle cleaningUsually not needed. For mirror film, check building rules.No effect
Solar film – exteriorAt the outer surface of the glassView remains; light depends on film.Medium, depending on accessRegular gentle cleaningMay change the facade. Check building rules.No effect
Interior blinds and roller blindsOnly inside the roomNo view when closedLowDust, mechanismNot neededNo effect
External blinds and screen blindsIn front of the windowRestricted when closedMedium to highMechanism, motor, slatsOwners’ consent, notification. Listed: heritage office too.Raise in wind; may rattle.
AwningIn front of the window, from aboveView mostly remainsMedium to highFabric, mechanismOwners’ consent. Listed: heritage office too.Retract in wind
Air conditioningDoesn’t stop it – removes the heatNo effectMedium to high + electricityRegular servicingOutdoor unit subject to building rules.Unit noise
New windows with solar control glassIn the glassView remainsHighNormalConsent if the look changes. Listed: heritage office too.No effect

This is an indicative comparison, not a price list. Cost levels are relative and depend on scope and access. Film heat rejection is based on 3M data (EN 410 / NFRC). Permits are governed by the Slovak Act on Ownership of Flats and Non-Residential Premises, building regulations and heritage protection. Always check with the building authority and the building manager.

Preparing for the installation

Film is applied wet, so the fitter needs to reach the glass from the front and the sides with a squeegee, knife and sprayer.

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Caring for window film

Do not clean the film for the first 30 days. A light haze and small water bubbles are normal. They disappear on their own as the film dries. In winter this takes longer.

Do

  • Plenty of water with a drop of mild detergent (no ammonia)
  • Soft microfibre cloth
  • Rubber squeegee for the remaining water
  • Clean exterior film just as gently as interior film

Don’t

  • Razor blades, scrapers and rough sponges
  • Cleaners with ammonia or grit
  • Stickers, tape and suction cups on the film
  • A pressure washer close to the edges of exterior film

Tip from practice: When you clean the frames, take care of the film edges. Do not lift them with a fingernail or cloth.

Full film care guide

Updated: November 2026

Why choose us to fit your film

We are a certified 3M Endorsed Installer. Our fitters were trained and tested by 3M itself. We have been fitting window and car films for 25 years. How long a film lasts depends on how well it is fitted.

  • We have even worked inside nuclear power plants

    We fitted film at the Jaslovské Bohunice and Mochovce nuclear power plants. With security clearance, work permits and the strictest health and safety rules. We bring the same discipline to your flat or office.

  • Open shopping centres and work from platforms

    Aupark, Eurovea and Polus did not close for us. We worked section by section and before opening. The work area was fenced off. We reached atriums and skylights from platforms. All our installers are certified for work at height and for operating aerial work platforms and walkways.

  • Only premium materials, data shown openly

    We use only premium films from 3M, Avery Dennison, ORAFOL and Solar Screen. They last longer, keep their colour and carry a manufacturer warranty. For every film you get the data sheet and certificates. The values in our quote are the manufacturer’s figures to recognised standards. Not sales promises.

  • We tell you when film isn’t the answer

    Sometimes film will not solve the problem. Or the glass could crack from uneven heat (thermal stress). Then we tell you plainly and suggest what to do instead.

How it works

From your first message to the finished job usually takes a few days. For buildings, we plan the work so it does not disrupt your operations.

  1. Enquiry or photo

    Fill in the online form and see an estimated price at the end. Or send a photo to m2s@m2s.sk. Rough sizes are enough.

  2. Free site visit

    For buildings, we visit, measure the windows and check the glass. Then we recommend a suitable film.

  3. Your quote

    We prepare it as soon as possible. It has a clear price, the exact material, a date and the warranty terms.

  4. Installation and warranty

    Our team of two installers fits the film. You get the data sheet, the manufacturer’s warranty terms and an invoice. For cars, also a certificate of installation.

Frequently asked questions

Didn’t find your answer? E-mail us or send a free quote request – advice costs nothing.

Send us an e-mail
Is film or blinds better?

It depends on what you want. Closed external blinds stop the most heat, but they block the view and change the facade. Film works all the time and keeps the view. Interior blinds mainly deal with glare, so a combination is often best.

Can film replace air conditioning?

Usually not entirely. But it reduces the heat coming through the windows, so the air conditioning runs less. In some flats and houses, film with night ventilation is enough.

What stops more heat – external blinds or film?

Closed external blinds, because they catch the sun in front of the window. On double glazing, film rejects 42 to 85 % of solar energy, depending on the type. For example, 3M Prestige 70 interior rejects 42 %, 3M Silver 15 Exterior 85 %. But film also works when the blinds are up and you want to look out.

Do I need a permit for window film?

For interior film, usually not. Exterior and mirror film can change the look of the facade. So in an apartment building check the building rules; for listed buildings, get the heritage office’s opinion too.

Do I need a permit for external blinds?

In an apartment building, usually yes: you need the owners’ consent, as blinds change the look of the building. External blinds are also notified to the building authority. Check with your local building authority.

Will film cool the flat at night too?

No. Film reduces how much solar energy gets in during the day. In the evening and at night, ventilation helps.

Can I use blinds together with film?

Yes. With insulating glass, however, don’t leave interior blinds closed tight against the glass all day. Heat would build up between them and the glass.

Will film reduce solar gain in winter?

Yes, solar film lets in less sun in winter too. For windows where you want the winter sun, we choose a lighter film or none. Solar film does not change heat loss through the window.

Which is cheaper – film or external blinds?

It depends on the film type, window area and access. So compare actual quotes. We prepare our film quote free of charge. Send dimensions to m2s@m2s.sk or via the form.

What do you recommend for a glazed office?

Exterior solar film on the facade and interior roller blinds against screen glare. The air conditioning then runs with a lower load. More on office window film. For seated work, Regulation 99/2016 sets a limit of 28 °C. This is explained on office and building overheating.

What do I need to prepare before the film is applied?

Clear access to the windows: leave roughly 1 metre of free space in front of and beside every window. Move wardrobes, beds, desks and plants away beforehand, clear the window sills, pull curtains aside and raise interior blinds. If something heavy cannot be moved, tell us in advance and we will plan around it.

Gloved hands stretching blue film over a car body

Send us a photo of your window or car. We’ll prepare a quote as soon as possible.

A few details and a phone photo are enough. We’ll e-mail you a quote as soon as possible.

  1. 1Service
  2. 2Details
  3. 3Photos
  4. 4Price

What do you need?

The more you tell us, the more accurate the quote. You will see an estimated price at the end.

Job type

Which car is it?

The model and scope let us price precisely – we have film patterns for most cars.

Car

Services

Choose any.

Window tinting

Which windows to tint

Front side windows: clear 3M Safety film only. Windscreen: sun strip only. Choose both in the services above. Pick windows on the 3D model

PPF paint protection film

Coverage

Pick exact panels on the 3D car model.

Film

The estimate below is for gloss PPF. We state the price difference between GSWF, Avery Dennison and HOHO in the quote.

Finish

Film type

Tell us about the windows

Approximate details are enough. We measure precisely during the free site visit.

What do you want to solve?

Choose any.

Film type

Price of the film alone, incl. VAT. Application is added.

Glass sizes

How to measure the glass

Film is applied to the glass only, never to the frame. Measure just the visible glass – from bead to bead.

glass width glass height frame don’t measure bead measure from here
  1. Measure the width and height of the visible glass from one glazing bead to the opposite bead. Do not measure the frame or the sash.
  2. Measure each pane separately. If the window has glazing bars, measure each section and enter how many identical pieces there are.
  3. Centimetre accuracy is enough – round up. We cut the film to size on site anyway.
  4. Not sure? Send a photo of the window with a tape measure, or book a free site visit.

Measure the glass only, bead to bead – not the frame. Enter identical panes once with a quantity.

WidthHeightQtyRemove
cm cm
m²
Film applied

Glass and windows

Glass type
Window frame type

With wooden windows the application costs 20 % more.

Window orientation (choose any)
Access to the windows

Where is the job?

We work out travel from Bratislava from the town.

km

Extras

We need clear access to the windows – at least 1 metre. Please leave roughly 1 m of free space in front of and beside every window. Wardrobes, beds, desks or plants must be moved away before the film is applied, curtains pulled aside and interior blinds raised. The fitters can then work faster and cleaner, with no risk to your furniture.

Photos and notes

A phone photo is often enough for an accurate quote without a visit. Photograph the whole window and its surroundings; for cars the full side and front.

Photos

Site visit

Estimated price

–

    This is an estimate based on your details. We confirm the exact price after a visit or from photos – we will get back to you as soon as possible.

    Where should we send the quote?

    Contact

    How should we contact you?

    Company

    Optional. Fill in if the quote is for a company.

    Search